TYROLIT BC-2 Core Drilling System Owner’s Manual
- June 3, 2024
- TYROLIT
Table of Contents
BC-2 Core Drilling System
Owner’s Manual
BC-2 Core Drilling System
The BC-2 is ideal for drilling large holes up to 1 000 mm. Thanks to the
modular design, combined use with TYROLIT cable saws and hydraulic equipment
is possible without difficulty. The dual-column guidance principle and a two-
speed feed gear enable user friendly work and low weight. A large selection of
drill accessories rounds off the range.
High stability yet low weight thanks to 2-pillar guide system
Effortless
drilling thanks to two speed feed gearbox i=1:2 and i=1:9Bores with a diameter of up to 1
000 mm with ModulDrill™ distance plates
System & Accessories
Technical data
Drill rig BC-2
Drill diameter range | 100–400 mm |
---|---|
Max. drill diameter with distance plates | 1 000 mm |
Max. drill bit length | 980 mm |
Design
Steel dowel foot………………………………………….
Two-speed feed gearbox i=1:2 and i=1:9…………..
Feed using hand crank……………………………………
Can be adjusted to any angle……………………………
Adjusting feet (micro)…………………………………………
Dimensions & Weight
Length | 460 mm |
---|---|
Width | 290 mm |
Height | 1 340 mm |
Weight | 30 kg |
System & Accessories
964906 | ModulDrill™ distance plate Ø +180 mm |
---|---|
964907 | ModulDrill™ distance plate Ø +250 mm |
977464 | ModulDrill™ mounting plate |
974270 | Extraction device for core bits |
977353 | Extraction device for cores |
977462 | Handwheel complete |
974264 | Trolley chassis |
975746 | Tool box |
10991465 | Water tank 10 l |
System suggestion
Core drilling system BC-2
974266 | Drill rig BC-2 |
---|---|
984076 | Fastening plate for ModulDrill™ |
10991100 | Drill gearbox DGB1000 |
10998369 | Drilling and circular wire saw kit WSE1621 |
10997955 | Electric main drive motor WSE1621 400–480 V / 50 Hz |
974263 | Feed gear 2-speed |
11002700 | Electric control unit WSE1621 400 V |
control
10987583| Feed motor
11002077| Fastening bolt assembly
11002624| Drill hammer DHE32 / 230 V incl. 16 mm drill