Ghostek Rush Series Wireless Sport Earbud Headphones User Guide
- June 3, 2024
- Ghostek
Table of Contents
Ghostek Rush Series Wireless Sport Earbud Headphones
Specification
- BRAND: Ghostek
- MODEL NAME: Rush
- COLOR: White/Rose
- FORM FACTOR: In Ear
- CONNECTIVITY TECHNOLOGY: Wireless
- WATERPROOF RATING: IP4X
- STANDBY TIME: 10 Days
- PLAYING TIME: 3 Hours
- DRIVERS: 9mm Speaker Drivers
- WIRED CONTROLS: Volume, Calling, Music
- PRODUCT DIMENSIONS: 8 x 4 x 1 inches
- ITEM WEIGHT: 3 ounces
- BATTERIES: 1 Lithium Ion batteries required
Introduction
These RUSH wireless sport earbuds are among the best earbuds available when it comes to quality. These sweatproof earbuds will withstand even the most strenuous workout thanks to their IP4X water resistance rating. The improved HD sound quality allows you to enjoy crystal clear audio, which is more important. A hands-free call can be made using the built-in microphone and 9mm speaker drivers. These earbuds’ wireless technology has a straightforward one- step pairing process.
You can change the music, calling, and volume using the wired controls without having to take out your phone. These earbuds have a 3 hour playing time and a 10 day standby time on a full charge. Additionally, using the micro-USB charging cable that was provided with your purchase, a full charge only takes 1.5 hours. The earbuds are available in 5 different colors to suit your personal taste. Finally, the included smart grip ear tips will guarantee a perfect fit.
WHAT’S IN THE BOX
- Earbuds
- Charging Cable
HOW TO OPERATE
- Press the MFB button for 10 seconds to enter pairing mode
- Press + button once to increase the volume
- Press – button once to decrease the volume
- Press + button for 2 seconds to skip to the next song
- Press – button for 2 seconds to return to previous song
- Press MFB button to attend/decline a call
HOW TO CHARGE
Connect one end of the provided charging cable to the USB port of your computer/ power bank or a mobile phone charger. Connect micro-USB to the headphones. LED light flashes indicating that the earbuds are charging. It only takes 1.5 hours to fully charge the headphones.
HOW TO PAIR
Press the multifunction button on headphones for 10 seconds to enter pairing mode. On your device, turn the Bluetooth on and search for “Ghostek”. Tap pair to connect.
HOW TO CLEAN
- 30 minutes in warm, soapy water with the silicone covers.
- Use an old toothbrush to remove extra dirt.
- Use a cotton swab dampened with rubbing alcohol to clean the speakers.
- Use a microfiber cloth dampened with rubbing alcohol to clean the earbuds and wires.
FAQs
How can I tell when the battery in my true wireless earbuds is full?
The charging case’s front has an LED indicator that flashes red when charging and stays red when fully charged.
Can wireless earbuds be used without Wi-Fi?
Instead of using data to connect devices, Bluetooth instead makes use of short-range radio waves. Even if you don’t have cellular service or an internet connection, Bluetooth devices can still be used.
Why won’t my headphones power on?
Ensure that your device and headset are in close proximity. Charge both your device and your headset.
On Bluetooth headphones, where is the power button located?
The play/pick up call button is typically used. It should turn on if you hold it still for a short while.
I only have one earbud connected; why is that?
One earbud not working can be caused by a variety of problems. Some issues can be resolved easily, such as Bluetooth pairing issues or devices that just require cleaning or resetting.
How long should my earbuds charge for?
The earbuds need about two hours to fully recharge. If the battery is low, you can extend its life by 10 to 20 minutes by charging it in the charging case.
Can you harm your ears with earbuds?
If you don’t use your earbuds for too long or too loudly, noise-induced hearing loss caused by them is completely avoidable.
When they are full, do earbuds stop charging?
Once they reach 100, almost all wireless earbuds will automatically stop charging.
What occurs if I charge my earbuds too much?
No, it’s not possible to overcharge the earbuds. With any lithium ion product, this should not be a problem.
What does the earbuds’ red light signify?
Your headphones’ red or amber flashing usually indicates that the battery is getting low.
Why do earbuds malfunction?
The most common reasons why earphones and earbuds stop working are wire strain, faulty wiring from the manufacturer, moisture damage, and damage to the sound drivers.
What distinguishes Bluetooth earbuds from wireless earbuds?
The method of connecting the headphones to a media player is the main distinction. Wireless headphones can transmit audio signals using radio waves, infrared, internal memory, or KleerNet, as opposed to Bluetooth headphones, which do so using short-range radio waves.
Are wireless earbuds data-consuming?
Simply put, no. Bluetooth can be used without turning on your phone’s data plan, and it won’t use any mobile data while it’s active either. While using Bluetooth, if you notice that your data is running low, an app is probably the cause.
How long does the initial charging of a Bluetooth headset take?
While the headset is on, avoid charging it. Before using the headset for the first time, it must first be charged for at least 30 minutes.
Is the charger supposed to be included with this? There was not one in my box.
I also did not receive one. But I wasn’t concerned because I have a lot of micro USB cables.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>