FANTECH WGC3 CRYPTO Wireless Gaming Mouse Instruction Manual
- June 16, 2024
- fantech
Table of Contents
FANTECH WGC3 CRYPTO Wireless Gaming Mouse
What’s Included In The Box?
- CRYPTO Wireless WGC3
- Type-C charging cable
- USB receiver
- User manual
System Requirements
- Operating systems, Windows ‘YJ>/7/8/1 0/11: MAC OS
- One USB 2.0/3.0 port
Instruction Manual
Thank you for purchasing FANTECH CRYPTO Wireless WGC3 gaming mouse.
FANTECH CRY PTO Wireless has 20 millions switch and also support up to l
OOOODPI with DPI switch button, to make you pinpoin t accurate and to land
more killing blows when playing the game.
FANTECH CRYPTO Wireless is a plug and play dual power USB mouse, no need to
install any driver to use. For more enhanced settings and function. You can
install the software from our website
www.fantechworld.com
Technical Specification
- Pixart 3325 Gaming Optical Sensor
- On-the-fly Adjustable DPI 400-1 OOOODPI
- 1000Hz Polling Rate
- Huano 20.000.000 Clicks Lifetime
- Up to 100ips / 20G Acceleration
- Battery Capacity 300mAh
- Battery Life : Up to 40 hours
- Charging Time : Approx 2 hours
- Wireless distance : 10M
- Weight : 93g
- Size : 128mm x68mmx41mm
Size
Keys Function Map
| KEY | KEY FUNCTION MAP |
|---|---|
| 1 | LEFT BUTTON |
| 2 | MID SUTTON |
| 3 | RIGHT SUTTON |
| 4 | FORWARD |
| 5 | BACKWARD |
| 6 | DPI SWITCH |
| 7 | POWER SWITCH |
| 8 | USB RECEIVER |
How To Connect
Its plug and play. Connect the mouse receiver to computer by inserting USB
receiver to your computer USB port.
How To Use
Power switch
Easily switch the mouse to wired mode, Strike Speed mode, and Eco mode.
Wired mode
To active wired mode, simply disconnect the wireless receiver, switch the
mouse to OFF, and connect the USB cable to the mouse.
If the LED on the Scroll wheel blinks red color, this indicated low battery.
Connect the USB to charge the mouse.
Software
Key settings
- 6 Macros button assignment
- You can set up to 4 profile
Advanced settings
- 5 Stages DPI customization from 50- 10000DPI.
- You can customize mouse sensitivity, scrolling speed, double – click speed on advanced setup.
Macro setup
* To create new macro, follow steps below:
- Press “New Macro” bar
- Input the “Macro Name”
- Click “Start recording” to start recording and click “Stop record” to stop recording. The macro key (Delay/cycle time can be edited/modified)
- After click “Stop record”, click “save” to save macro key.
* To use the macro
- Select the designation button
- Select macro and choose the “MACRO NAME”
- Click “OK”
Lighting setup
- Customize up to 7 different Spectrum mode: Steady, Breathing, Streaming, Neon, Scrolling, Colourful Breathing, LED OFF.
- Some of the spectrum modes can be customized, such as brightness and speed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>