HONDA P213 Climate Control System User Manual

June 3, 2024
Honda

HONDA logo P213 Climate Control System
User Manual

Climate Control System

  • Press the AUTO button to activate the climate control system.
  • Press the button to turn the system on or off.
  • Press the button to defrost the windshield.

HONDA P213 Climate Control System - Figure 1

Air flows from dashboard vents.
Air flows from floor and dashboard vents.
Air flows from floor vents.
Air flows from floor and windshield defroster vents.

Rear Climate Control*

  • Press the AUTO button to activate the rear climate control system.
  • Press the button to turn the system on or off.

HONDA P213 Climate Control System - Figure 2

Air flows from the rear console vents.
Air flow from the rear console vents and floor vents.
Air flows from the rear floor vents.

  • Not available on all models

Climate Control System

Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that will as quickly as possible, raise or lower the interior temperature to your preference.HONDA P213 Climate Control System - Figure
3Use the system when the engine is running.

  1. Press the AUTO button.
  2. Adjust the interior temperature using the driver’s side or passenger’s side temperature control switch.
  3. Press the ON/OFF button to cancel.

Using Automatic Climate Control
If any buttons are pressed while using the climate control system in auto, the function of the button that was pressed will take priority.
The AUTO indicator will go off, but functions unrelated to the button that was pressed will be controlled automatically.
During Auto Idle Stop, air-conditioning is suspended, and only the blower remains active.
If you do not want air-conditioning suspended, press the Auto Idle Stop OFF button to cancel Auto Idle Stop.
To prevent cold air from blowing in from outside, the fan may operate at low speed for a while after the AUTO button has been pressed.
While ECON mode is active, the climate control system may have reduced cooling performance.
If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning the system on auto, and setting the temperature to low. Change the fresh mode to recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper limit, Lo or Hi is displayed.
Climate Control System Using Automatic Climate Control
■ Switching between the recirculation and fresh air modes
Press the button and switch the mode depending on environmental conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.

Defrosting the Windshield and Windows

HONDA P213 Climate Control System - Figure 4Pressing the button turns the air conditioner system on and automatically switches the system to fresh air mode.
Press the button again to turn off, the system returns to the previous settings.
Using Automatic Climate Control
Pressing the ON/OFF button switches the climate control system between on and off. When turned on, the system returns to your last selection.
Defrosting the Windshield and Windows
For your safety, make sure you have a clear view through all the windows before driving.
Do not set the temperature near the upper or lower limit.
When cold air hits the windshield, the outside of the windshield may fog up.
If you press the button during Auto Idle Stop, the engine restarts automatically.
If the side windows fog up, adjust the vents so that the air hits the side windows.

To rapidly defrost the windows

HONDA P213 Climate Control System - Figure 5

  1. Press the button.
  2. Press the button.

To rapidly defrost the windows
After defrosting or defogging the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.
Climate Control System Synchronization Mode

Synchronization Mode

HONDA P213 Climate Control System - Figure 6You can set the temperature synchronously for the driver side, front passenger side and rear seats in synchronization mode.

  1. Press the SYNC button.
    The system will switch to synchronization mode.

  2. Adjust the temperature using driver’s side temperature control switch.

Press the SYNC button to return to synchronization mode off.
Synchronization Mode
When you press the button, the system changes to synchronization mode.
When the system is in synchronization mode off, the temperature for the driver, front passenger, and rear seats can be set separately.
Climate Control System►Rear Climate Control System

Rear Climate Control System

■ Using the Rear Climate Control System From the Front Panel
HONDA P213 Climate Control System - Figure 7
Use the system when the engine is running and the climate control system is operating.

  1. Press the REAR (Rear On/Off) button.

  2. Press the RR SETTINGS button.
    The system switches to the rear control mode for 10 seconds. The REAR indicator appears on the display.

  3. Press the AUTO button.
    The rear system changes to AUTO mode.
    The system automatically adjusts the fan speed and airflow levels to maintain the set rear temperature. Change the temperature if necessary.

  4. To turn off the rear climate control system, press the (Rear On/Off) button.

Rear Climate Control System
Models with rear lock button
LOCK appears on the rear control panel while the rear lock is on.
If the rear lock is on while in SYNC mode, the rear control panel is disabled. LOCK SYNC appears on the rear control panel.
Using the Rear Climate Control System From the Front Panel
Models with rear lock button Press the REAR LOCK button to turn the rear lock mode on and off.
While the rear lock mode is on, the rear control panel is disabled.
► REAR LOCK appears on the display.
When the rear fan is set to maximum speed, Auto
Idle Stop does not activate.
Auto Idle Stop may not activate under other conditions when the rear climate control system is in use.
**■ Using the Rear Climate Control System From the Rear Panel***HONDA P213
Climate Control System - Figure 9 Use the system when the engine is running and the climate control system is operating.

  1. Press the (Rear On/Off) button.
  2. Press the Rear AUTO button.
  3. Adjust the interior temperature using the rear temperature control button.
  4. To turn off the rear climate control system, press the button.
  • Not available on all models
    Using the Rear Climate Control System From the Rear Panel*
    When the REAR LOCK button on the front control panel is off, the temperature of the rear passenger compartment can be controlled independently.
    ** Climate Control System ►** Automatic Climate Control Sensors

Automatic Climate Control Sensors

The automatic climate control system is equipped with sensors. Do not cover or spill any liquid on them.HONDA logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals