CAZBOO 400S300 Aluminium Garden Gazebo Instruction Manual

MIRA 400S300
INSTRUCTION MANUAL

400S300 Aluminium Garden Gazebo

BEFORE STARTING THE INSTALLATION :

• Please read all the instructions in this manual before starting to install your Pergola
• Please check the contents of each box thanks to the parts list
• Do not discard cartons until the product is fully assembled
• Before purchasing or assembling this product, consult your local authorities regarding the installation of temporary structures.

Some jurisdictions may require building permits, or otherwise regulate installation and use.
When you are ready to begin, make sure you have the right tools, plenty of space and a clean, dry place to assemble your pergola.

LH-A15| 2| 1560mm
---|---|---
LH-A16| 2| 1560mm
LH-A17| 4| 780mm
LH-A18| 4| 1380mm
LH—A19| 2| 1380mm
LH-A29| 4| 1880mm
LH-A21| 4| 1380mm
LH-A30| 5| | LH-A31| 5|
LH-A24| 3| | LH-B9| 4|
LH-B10| 1| | LH-C1| 4|
LH-B4| 4| | LH-B5| 4|
LH-D1| 46+2| | LH-D8| 21-11|
LH-D11| 10+1| | LH-D22| 10+1|
LH-D34| 14+1| | LH-D33| 8+1|
LH-D37| 1| | LH-D25| 1|
LH-D29| 8| | LH-D30| 8|
LH-E3| 1| | LH-C6| 4|
LH-C7| 10| | LH-B16| 1|
LH-D21| 1| | LH-D26| 1|
LH-05| 14| | | |
|
---|---
|
|
|
|
|
|
|

Maintenance tips

1. Product
   Properties
   For outdoor use only.
   The frame is made of steel parts, a material renowned for its durability and strength.
   The roof is made of polyester. This is a synthetic fabric that provides very good strength and elasticity.
   This fabric also has the benefit of not wrinkling.
   Assembly
   The manufacture and assembly of this product requires that there is a gap between the individual parts.
   As a result, gaps of up to several millimeters are generally observed between the two components.
   This tolerance is necessary for the correct realization of the product and can be the cause of geometrical differences.
   This will not result in any loss of product functionality.

2. Precautions for use
   We cannot guarantee the durability of the product during difficult weather conditions.
   It is suggested that you avoid being near or under the structure during rainy and stormy weather.
   Once a major weather event has passed, we recommend that you assess the overall condition of the structure before use.
   It is advisable to remove fabrics from the roof during bad weather: the accumulation of water, dead leaves or objects on the roof contributes to its deterioration.
   We advise against heat sources and lighting on or near the structure.

3. Maintenance
   It is common for the product to show natural wear with time and use, resulting in deterioration of the colours and surface finishes, mechanical functions and tightening of the elements.

UV exposure
It is normal for materials such as textiles and paints to become discoloured by UV light.
Each ray of sunlight or moonlight creates a new variation in the substance.
Colours normally wear out due to exposure to the outside world.
Tightening
Your product needs regular maintenance to remain functional. Doing these repairs yourself on a regular basis can improve the longevity of the product. Remember to tighten the components regularly.
Regular maintenance
It is important to maintain your product properly so that it does not deteriorate.
A steel structure has the advantage that you don’t need to invest in products or equipment that are too specific.

All you need is :

• A soft sponge ;
• A microfibre cloth;
• And a water jet.

After cleaning, rinse with clear water (you can use a jet, if it is not high pressure). Don’t forget to rinse the feet as well so that no dirt remains.
Finally, you can finish your work by wiping the structure with a microfibre cloth to dry it and restore its brilliance.

• Do not use abrasive products or detergents (bleach, acetone, etc.) which could damage the steel.
• Do not use a hard bristle brush, which could also damage the structure.
• Do not use a high-pressure jet.

For the fabric, remove it from the frame, unfold it and spread it out on the lawn or patio (avoid stony surfaces which could damage it).
Brush or sweep the area to remove any accumulated dirtiness such as dust, leaves etc.
Use a soft sponge with warm soapy water to remove any stains and dirtiness that have remained.
Finally, let the fabric dry completely.
We recommend cleaning your fabric 3 to 4 times a year.
To avoid the appearance of moisture and mould, we recommend that you store your fabric in a closed and dry place during the autumn and winter seasons.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>