BUSH F54180FFWTDB Fridge-Freezer Owner’s Manual
- June 3, 2024
- BUSH
Table of Contents
BUSH F54180FFWTDB Fridge-Freezer
Precautions
- Always follow safety advice.
- Always switch off and unplug the appliance before attempting to remove any part.
- Always wear appropriate protective equipment when carrying out any work.
- Always use the correct tools for carrying out any work.
- Some repairs may not be suitable for unqualified users to carry out. If in doubt seek the advice of a profession repairer.
SAFETY PRECAUTIONS
- Read all instructions before repairing the product
- Before any disassembly makes sure the appliance is unplugged.
- There is an electrical shock risk.
- Use rated control equipment.
- DO NOT attempt a product repair f you have any doubts as to your ability to complete the repair in a safe and satisfactory manner
- Make sure to check out the Model name, Rated voltage. Rated current, Operation Temp. etc.
- When you replace the parts. please use authentic parts to replace defective parts
- Before starting the dismantling, wear protective equipment.
- Do not use multiple receptacles or extension cords.
- Do not plug in damaged, torn, or old plugs
- Do not allow children to play with the appliance or let them hang off the door
- Do not plug in or out the plug from the receptacle with wet hands to prevent electrocution.
- Do not place glass bottles or beverage cans in the freezer department.
- Bottles or cans may explode.
- When taking ice made in the freezer department, do not touch t. ice may cause ice burns and/or cuts.
- Do not cover the body or top of the fridge with lace.
- This affects the performance of your fridge.
- Fix the accessories in the fridge during transportation to prevent damage to the accessories.
- Leave to stand for at least before switching on to allow compressor oil to settle if transported horizontally
- Do not damage the refrigerant circuits.
- Care must be taken while cleaning/carrying the appliance not to touch the bottom of the condenser metal wires at the back of the appliance, as this could cause injury to the tingers and hands.
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Glass Shelf Change|
First, gently lift the front side of the glass up. Then you can pull the glass
out by directly pulling it towards yourself.
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Foldable Glass Shelf Change|
First push the glass in front to all the way back. Then gently lift both glasses up together. Now you can pull glasses out by directly pulling them towards yourself.
REPLACEMENT PROCEDURE| Applicable models| EN|
---|---|---|---
General
|
Part name| Flap Cover Change|
First open the flap slightly, now push the flap up from its bottom edge, focusing on only one side. When the flap is freed from this side, repeat the same operation for the other side.
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Door Shelf Change|
Gently pull the shelf up using both hands, without bending or twisting the
shelf. When the shelf is free from assembly on right and left sides, you can
take the shelf out by pulling towards yourself.
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Adjustable Door Shelf Change|
First grip the door shelf by both hands, at the same time using your thumbs, pull latches on sides towards yourself. This will unlock the mechanism, so you can lift the shelf all the way up and free the shelf from its guides on the door.
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Basket, Chiller, Crisper Change|
First pull the basket out until it reaches end position. Then, gently pull the
front side up until frees from its guides on the sides. Finally, continue
pulling it out and remove it from place. 
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Maxifresh Change|
REPLACEMENT PROCEDURE| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Door Gasket Change|
Pull the gasket towards starting from the top right corner. Slowly pull the
rest of the gasket. Completely
remove the gasket from the door.
Check the replacement gasket from starting with upper right corner, press on the gasket until it fits to its place. Place the other sides of the gasket with the help of your thumb
After the replacement check if there any nonfitting point on the gasket. Also
check if there any opening at the gasket while the door is closed. If so that
might cause condensation/icing or insufficient cooling/freezing. To prevent
this soften the form of the gasket with the help of a hair dryer or hot water
and make sure that all points are closing perfectly.
REPLACEMENT PROCEDURE| Applicable models| EN|
---|---|---|---
General
|
Part name| Reversing the door|
Hold the top hinge cover and remove it toward that direction remove it toward
that direction| Unscrew the screws fixing the top hinge and remove it|
| |
Displace the top door| Unscrew the two screws fixing the middle hinge and
remove it|
| |
Displace the bottom door| Unscrew the adjustable foot|
| |
Unscrew the bottom hinge screws| Unscrew the bottom hinge pin and screw it
into another hole|
| ****|
REPLACEMENT PROCEDURE
| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Reversing the door|
Screw the bottom hinge to the left bottom side of the refrigerator. Screw the
adjustable foot there| Unscrew the two screws fixing the stopper and stopper
support plate under the cooler door. After that screw the
other side
|
| ****|
Replace the top bushing and the top bushing cap at the bottom door.| Remove
the support plastic and then metal stopper placed under the upper door. Then
re screw these parts to the other side symmetrically. (remember the screw for
the metal part must be screwed to the hole which is closer to the bushing). Do
not use cordless screwdriver for
these screws.
|
**| 
**|
Remove the hinge cover on the top panel and replace to other side| Place the
bottom door and rotate the middle hinge by 180º. After that, Screw to the
right side on the middle
sheet
|
| |
Place the top door to the middle hinge and screw
the top hinge to the top panel
| Place the top hinge cover|
| |
REPLACEMENT PROCEDURE
| Applicable models| ****
EN
|
---|---|---|---
General
|
Part name| Water Tank|
Mount the water tank, and push it down to firmly secure it in the holder
Add your drinks with the help of the water tank top cover| Release the side
locking covers to detach the water tank cover.
|
To serve your drinks, gently press the valve lever
ADDITIONAL SUPPORT
| Applicable models
General
| ****
EN
---|---|---
The following parts are available for the customer to undertake repairs at their own risk. Please carefully follow the guidance given in this manual including all safety measures.
- Door Handles
- Door Hinges
- Trays
- Baskets
- Door Gaskets
- Parts can be obtained by calling the support service listed in this section.
- All repairs in this manual can be achieved using commonly available tools.
- If you are in any doubt of your ability to carry out a repair, please use a professional repairer, also available through the support service.
- Damage sustained to the appliance or future faults arising from poorly carried out repairs will not be covered under warranty.
Help and assistance
-
If you require any technical guidance or find that your fridge-freezer is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.bush-support.com
-
If you still require further assistance, call one of our experts on 0345 257 7271*. To help us give you a fast and efficient service please have the following information ready.
-
**Local call rates apply***
Lines are open 8 am-7 pm Monday to Saturday and 10 am-4 pm Sunday. -
Calls to Bush inquiry lines may attract a charge and set up fee residential lines depending on your call plan/tariff. Mobile and other providers’ costs may vary, see www.bt.com/pricingfordetails
-
For security and training purposes, telephone calls to and from customer service centers may be recorded and monitored. Calls from the Republic of Ireland will attract international call charges
Notes on disposal
The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local council office, your household waste disposal service or the shop where the product was purchased.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>