EKVIP 021644 Inflatable Santa Instruction Manual
- June 3, 2024
- EKVIP
Table of Contents
EKVIP 021644 Inflatable Santa
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
WWW.JULA.COM
© JULA AB • 2021-09-02
JULA AB
BOX 363, 532 24 SKARA, SWEDEN
SAFETY INSTRUCTIONS
- Do not connect the product to the mains power supply while the product is still in the pack.
- Designed for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together.
- No part of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the product.
- This is not a toy. Do not allow children to play with the product.
- Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use.
- This string of lights must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The product may only be used if all seals are fitted correctly.
Symbols
| Read the instructions.
| Class II.
CE
| Approved as per applicable directives.
| Recycle a discarded product in accordance with applicable regulations .
TECHNICAL DATA
- Input voltage, transformer 230 V ~ 50 Hz
- Output voltage, transformer 12 V DC
- Output 12 W
- Protection rating IP44
- Ambient temperature -10 – 70 °C
USE
- Remove the Santa from the packaging.
- Spread out the Santa in the intended location.
- Make sure that the zip at the bottom is closed.
- Connect the fan to the transformer.
- Plug the plug into the mains power supply. The fan starts automatically.
- Lift up the Santa slightly so it will inflate quicker.
- Check that the Santa stands steady when inflated.
- Secure two lines in the eyes on the sides of the Santa.
- Attach the lines in the anchoring pins.
- Secure the anchoring pins in the ground.
- The product must be disconnected from the mains power supply when deflated. Opening the zip at the bottom accelerates deflation.
NOTE:
A pair of weights can be placed at the bottom of the Santa to ensure it
stands much steadier.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>