REGENCY 600DOS1284 Series Overshelf Instruction Manual
- June 3, 2024
- Regency
Table of Contents
REGENCY 600DOS1284 Series Overshelf
PARTS
- Place the top shelf (A) upside down on a surface that won’t scratch it.
- Secure the six legs (B) into the top shelf gussets using the Allen wrench and set screws (F) provided. You may need to loosen a set screw if one struggles to go in.
- Slide the mid shelf (C) into place and secure it using the set screws.
- Secure the two L-brackets (D) and middle bracket (E) to the bottom of the legs with the set screws.
- Align the over shelf to the back of the table to be mounted. Ensure the L-brackets are aligned properly and pre-drill holes through the side of the tabletop for screws. Screw L-brackets into the table (screws not included).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>