TVT TD-E2228-IC-TP Face Recognition Terminal User Guide
- June 3, 2024
- TVT
Table of Contents
TVT TD-E2228-IC-TP Face Recognition Terminal
About This Manual
- All pictures, images, icons and snapshots in this manual are for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.
- The manual will be updated according to the product improvement and are subject to change without prior written notice.
Legal Disclaimer
- To the maximum extent permitted by applicable law, the product described, with its hardware, software, software and firmware, is provided “as is”, with all faults and errors, and our company makes no warranties, express or implied, including particular purpose, and non-infringement of third party. In no event will our company, offices, or agents be liable to you for any special, consequential, incidental, or indirect damages, including, among others, damages for loss of business profits, business interruption, or loss of data or documentation, in connection with the use of this product, even if our company has been advised of the possibility of such damages.
- With regard to the product with internet access, the use of product shall be wholly at your own risks. Our company shall be irresponsible for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or other internet security risks; however, our company will provide timely technical support if necessary.
- During the use of the device, pleas strictly abide by applicable law. In the event of any conflicts between this manual and the applicable law, the later prevails.
Installation and Use
- Please use our product according to the following safety instructions and warnings.
- Do not place the camera in extremely hot, cold, dusty or damp location.
- Do not expose it to high electromagnetic radiation.
- If the product does not work properly, please contact your dealer or the nearest service center.
- Never attempt to disassemble the camera yourself. (We shall not be responsible for any
- problems caused by unauthorized repair or maintenance.)
- Do not drop the camera or subject it to physical shock.
- Keep away from liquid while in use.
- Do not touch the screen with sharp objects.
- If cleaning is necessary, please use clean cloth to wipe it gently, avoiding water or alcohol.
Package
Overview
Cable Connection
Note:
- The wiegand terminal here is a wiegand input terminal. If you want to connect to an access controller, you shall set the Wiegand direction to “Output”.
- A card reader can be connected to this device via RS 485 interface independently.
Installation
Ambient Illumination Requirement
Make sure faces can be captured clearly.
Avoid direct sunlight and backlight .
The device should be at least 2 meters away from the light, and at least 3
meters away from the window or door
Height Requirement
The recommended installation height (H) is 1.45m which can cover human height
of 1.2m ~2.2m in the detection area. It can be adjusted according to the
actual scene. The ideal recognition distance ranges from 0.5m to 1m.
Installation
Pole Mounting
Login
After the device is powered on and connected to the LAN, you will see the
following interface.
Network Configuration
In the main menu page, tap “Network Config” to go to the network configuration interface.
Local Network Configuration
Please set IPv4 or IPv6 as needed. Here taking IPv4 network settings for example. You can enter IP address, subnet mask, gateway and DNS server manually or get these network parameters by selecting obtaining IP address automatically. After that, tap to save the settings. Note: If you want to obtain IP address automatically, you shall enable DHCP function in the router.
Sever Configuration
Face Configuration
People Management
- Select “People Management” in the main menu page to go to the people management page.
- Tap “+” to enter the “Add User” page
- Set username, gender, group type, ID number, verification mode, etc.
- Tap to add a face picture. The detailed face adding requirements refer to the descriptions of Adding Face .
- Tap to save settings.
Adding Face：
Face the camera and ensure your face picture in the middle of the face
collecting window. Keep your expression naturally when collecting face
pictures.
Do not wear hat, sunglasses, or other objects that can affect the face
recognition function. Do not make your hair cover your eyes, ears, etc. The
ideal recognition distance is from 0.5 to 1m; when collecting or comparing
face picture, please ensure that the target is in a proper position.
Match Settings
In the face config page, tap “Match Settings” to go to the match settings
page. Please set similarity threshold, deduplication period, snapshot
interval, white light mode and so on as needed.
Deduplication period: In the pre-defined period, delete repeated comparison
results. It is recommended to use the default match settings.
Group Settings
In the face config page, tap “Group Settings” to go to the group settings
page. There are three groups– allow list, block list, visitor.
The group type of the added user can be changed here. Select a group and tap “
” to enter this group. Tap the user you want to change his/her group and then
a drop-down list will be displayed. Choose the group to change.
Web Client Access
-
Make sure that the device and the PC are well connected via LAN.
-
Find the IP-Tool from the CD and then install it in the computer. After that, run the IP-Tool as shown below
-
Modify the IP address. The default IP address of this terminal is 192.168.226.201. Click the information of the device listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as that of the computer. Please modify the IP address of your device according to the practical situation. After modification, please enter the password of the administrator and click “Modify” button to modify the settings.
The default password of the administrator is “123456”. -
Double-click the device listed in the IP-Tool or manually enter the IP address in the address bar of the web browser to connect the device.
Then follow directions to download and install the plugin. -
Enter the username and password in the login interface.
The default username is admin; the default password is 123456
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>