TVT DIGITAL C14 IP Network Camera User Guide
- June 16, 2024
- TVT DIGITAL
Table of Contents
TVT DIGITAL C14 IP Network Camera
Product Information
- Specifications
- Lens
- IR LED (ON: visible)
- Microphone
- Speaker
- PIR (Passive Infrared) sensor
- Power indicator
- Network indicator
- Alarm indicator
- Light sensing
- Ethernet connector & PoE
- Alarm I/G/O
- Power connector
- Reset or WPS
- Micro SD card slot
- 3-axis bracket
- Mounting base
Product Usage Instructions
- Warning and Caution
- Please read the instruction manual carefully before using the product and keep it for further reference.
- Package
- The package includes:
- Drill template
- 2 tapping screws
- 2 plastic plugs
- Overview
- The camera consists of the following components:
- Lens
- IR LED (ON: visible)
- Microphone
- Speaker
- PIR (Passive Infrared) sensor
- Power indicator
- Network indicator
- Alarm indicator
- Light sensing
- Ethernet connector & PoE
- Alarm I/G/O
- Power connector
- Reset or WPS
- Micro SD card slot
- 3-axis bracket
- Mounting base
- Alarm Connections:
- I: Alarm input interface;
- O: Alarm output interface;
- G: Grounding
- Alarm input: Connect the cables of the sensor to the I and G interfaces.
- Alarm output: Connect the cables of the alarm output device to the O and G interfaces.
- Installation
- Follow these steps to install the camera:
- Route and connect the cables.
- Hook the mounting base to the screws and ensure that the camera is fixed firmly.
- Adjust the angle of the bracket.
- Remove the protection films of the lens and the IR LED cover.
- Network Connection
- Access the Camera Through the Wired Network
- Make sure that the camera and the PC are connected via LAN. Find the IP Tool from the CD and then install it on the computer. After that, run the IP Tool as shown below:
Device Network Search
| Device Name | Device Type | Product Model | IP Address | HTTP Port |
|---|---|---|---|---|
| name | IPC | unknown | 192.168.226.201 | 80 |
| name | IPC | unknown | 192.168.1.2 | 80 |
| name | IPC | unknown | 192.168.1.3 | 80 |
Double-click the IP address listed in the IP Tool or manually enter the IP address in the address bar of the web browser to connect to the camera. Then follow the directions to download and install the applicable plug-in. After that, enter the username and password in the login interface. The default username is admin; the default password is 123456.
Access the Camera Through Wi-Fi
To access the camera through Wi-Fi, follow these steps:
- Enable Wi-Fi on the camera.
- Select the desired Wi-Fi network from the list of available networks.
- Enter the security mode and key for the selected network.
- Connect to the Wi-Fi network.
FAQs
- Q: How do I connect the camera to my computer?
- A: Connect the camera and computer via LAN and use the IP-Tool software to search for and connect to the camera.
- Q: What is the default username and password for the camera?
- A: The default username is admin and the default password is 123456.
- Q: How do I access the camera through Wi-Fi?
- A: Enable Wi-Fi on the camera, select the desired network, enter the security mode and key, and connect to the network.
- Q: How do I install the camera?
- A: Route and connect the cables, fix the camera firmly using the mounting base, adjust the angle of the bracket, and remove the protection films from the lens and IR LED cover.
Warning and Caution
- If the product does not work properly, please contact your dealer or the nearest service centre.
- Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems caused by unauthorized repair or maintenance.)
- Keep away from the liquid while in use.
- In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. When the product is mounted on the wall, the device shall be firmly fixed.
- Do not use a camera beyond the specified voltage range.
- Do not drop the camera or subject it to physical shock.
- Avoid touching the camera lens.
- If cleaning is necessary, please use a clean cloth to wipe it gently.
- If the device will not be used for a long time, please cover the lens cap to protect the device from dirt.
- Do not aim the camera at the sun or extra bright place.
- Do not place the camera in extremely hot, cold (the operating temperature shall be -10˚C~45˚C), dusty, or damp locations, and do not expose it to high electromagnetic radiation.
- To avoid heat accumulation, good ventilation is required for the operating environment.
Package
Overview
| 1 | Lens | 9 | Ethernet connector & PoE |
|---|---|---|---|
| 2 | IR LED ( ON: visible) | 10 | Speaker |
| 3 | Microphone | 11 | Alarm I/G/O |
| 4 | PIR (Passive Infrared) sensor | 12 | Power connector |
| 5 | Power indicator | 13 | Reset or WPS |
| 6 | Network indicator | 14 | Micro SD card slot |
| 7 | Alarm indicator | 15 | 3-axis bracket |
| 8 | Light sensing | 16 | Mounting base |
Alarm Connections:
- I: Alarm input interface;
- O: Alarm output interface;
- G: Grounding
- Alarm input: Connect the cables of the sensor to the I and G interfaces.
- Alarm output: Connect the cables of the alarm output device to the O and G interfaces.
Indicators
- Power indicator: Green: the camera is started successfully.
- Network indicator: Flashing blue: the camera is connected to the wired network successfully.
- Alarm indicator:
- Red: alarms are triggered.
- Reset
- Press RST about 10s when the camera is powered on to restore the default settings.
- WPS
- WPS (Wi-Fi Protected Setup): Press the WPS button on the router and then press the RST button on the camera within 120 to quickly connect the Wi-Fi. Pressing the RST button on the camera and then pressing the WPS button on the router will work as well. The red alarm indicator will flash if the Wi-Fi is connected.
- 3-axis Bracket Adjustment
Installation
The camera can be placed on the desktop or installed on the wall. Please make sure the wall is strong enough to withstand 3 times the weight of the camera. The steps of wall mounting are as follows.
- Attach the drill template to the place where you want to fix the camera. Then drill the screw holes on the wall according to the drill template.
- Peel off the drill template and then insert the plastic plugs and screws into the screw holes. Please leave a little clearance between the wall and the screws.
- Route and connect the cables.
- Hook the mounting base to the screws and ensure that the camera is fixed firmly. Then adjust the angle of the bracket.
- Remove the protection films of the lens and the IR LED cover.
Network Connection
Access the Camera Through the Wired Network
- Make sure that the camera and the PC are connected via LAN.
- Find the IP-Tool from the CD and then install it in the computer. After that, run the IP-Tool as shown below.
- Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as the computer’s. Please modify the IP address of your device according to the practical situation. After modification, please enter the password of the administrator and click “Modify” button to modify the setting. The default password of the administrator is “123456”.
- Double-click the IP address listed in the IP Tool or manually enter the IP address in the address bar of the web browser to connect the camera. Then follow the directions to download and install the applicable plug-in. After that, enter the user name and password in the login interface.
Access the Camera Through Wi-Fi
- A: You can quickly connect Wi-Fi through the WPS function (See 3 Overview–WPS for more details).
- B. You can also follow the steps below to connect to Wi-Fi.
- Connect the camera to the LAN through the network cable.
- Run the IP Tool and then find the IP address of the camera.
- The default IP address of this camera is 192.168.226.201. Double-click it. This will bring you to the login interface of the camera. Enter the default username and password to log in.
- Click “Config”→ “Network”→ “WIFI” to go to the following interface.
- Enable WIFI and click “Search” to search wireless routers. Select the desired router, enter the key number and select the encryption type. After that, select “Obtain an IP address automatically” or manually enter the IP address by clicking “Use the following IP address”.
- Pull the network cable out of the camera.
- Run the IP-Tool and find the camera through the IP address or MAC address. Then double-click it listed in the IP-Tool or enter the IP address of the camera in the address bar of the web browser to access the camera.
С14
4MP Cube Wi-Fi Network Camera
- Max. resolution: 4MP (2560×1440)
- ICR auto switch, true day/night
- 0.3-10m IR night view distance
- 3D DNR, BLC, HLC, etc.
- Support three streams
- Support 2.4G Wi-Fi
- Support mobile app for remote management and viewing of devices
- DC12V/PoE power supply
- Support P2P
SPECIFICATION
| Model | C14 |
|---|
Camera
Image Sensor| 1/3″ Progressive Scan CMOS
Image Size| 2560×1 440
Electronic Shutter| 1s ~ 1/100000s
IRIS Type| Fixed IRIS
MIN. Illumination| Color: 0.0035lux@F1.2,AGC ON
B&W: 0lux with IR
Lens| 2.1mm @F2.1; horizontal field of view: 137
Lens Mount| M12
WDR| 78dB
BLC| Yes
HLC| Yes
Defog| No
DNR| 2D/3D NR
Angle Adjustment| Pan: 0 ~230 ; Tilt: 0 ~71 ; Rotate: 0 ~360
Image
Video Compression| H.265+/ H.265/H.264+/H.264/MJPEG
H.264 Compression Standard| Baseline Profile/Main Profile/High Profile
Bit rate Type| VBR/CBR
Bit Rate| 64Kbps ~ 6Mbps
Resolution| 4MP (2560×1 440), 3MP (2304×1296) , 1080P (1920×1080 ) ,
720P(1280×720 ) , D1, 480×240
Main Stream| 60Hz:4MP/3MP/1080P/720P (1~30fps); 50Hz: 4MP/3MP/1080P/720P
(1~25fps)
Sub Stream| 60Hz: 720P/D1/CIF (1~30ps); 50Hz: 720P/D1/CIF (1~25ps)
Third Stream| 60Hz: D1/ CIF/480×240 (1~30fps); 50Hz: D1/ CIF/480×240 (1~25ps)
Image Setting| Saturation, hue, brightness, contrast, wide dynamic range,
sharpness, NR, image flip, etc., adjustable through client
or web browser
Audio Compression| G711A/U
Region of Interest| 8 regions of interest; each region can be configured
separately
APP/Cloud
Snapshot| Yes
Record| Yes
Two-way Audio| Yes
Listen| Yes
Storage| SD card storage
Playback| SD card storage
Sharing Device| Support sharing with friends
Interface
Network Interface| 100M RJ45
Audio| Built-in MIC×1, built-in speaker×1; echo cancellation supported
Alarm| 1CH alarm input; 1CH alarm output
Reset Button| Yes
PIR| Horizontal angle: 100 ; Range: 7m
Storage| Built-in micro SD card slot, up to 128G
WiFi| 2.4G WiFi function, IEEE802.11b/g/n
Up to 50m wireless range
Indicator| Yes
Function
Remote Monitoring| IE client/mobile APP client
Online Connection| Support simultaneous monitoring for up to 3 users and
multi-stream real time transmission
Network Protocol| UDP, IPv4, IPv6, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP,
802.1x, UPnP, HTTPS, HTTP
Interface Protocol| ONVIF
Storage| Network remote storage
Smart Alarm| Motion detection, sensor alarm, PIR alarm, SD card full, SD card
error, IP conflict, cable disconnection
Intelligent Analytics| Human Detection
General Function| Watermark, IP address filtering, video mask, illegal login
IR Light Distance| 0.3-10m
Water-proof Grade| No
PoE| Yes, IEEE802.3af
Others
Power| DC12V/POE
Power Consumption| <5W
Environmental Protection| RoHS 2.0 REACH WEEE directive94/62/EC
Working Environment| -20 ~50 , Humidity: less than 95% (non-condensing)
Dimensions(mm)| 130mm×71.7mm×71.7mm
Weight (net)| Approx.0.14KG
Installation| Wall mounting; Ceiling mounting desktop mounting
AVAILABLE MODEL
| Available Model | C14 | 4MP Cube Wi-Fi Network Camera |
|---|
DIMENSION
FCC
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmfulinterference to radio or television reception, which can be
determined by turning the equipmentoff and on, the user is encouraged to try
to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
CONTACT
- Shenzhen TVT Digital Technology Co., LTD.
- Address: 23rd Floor, Block B4, Building NO.9, Shenzhen Bay Eco-Technology Park, Nanshan District, Shenzhen,
- Guangdong Province, P.R. China
- Tel: + 86-755-36995888
- Website: http://en.tvt.net.cn.
- Fax: +86-755-33104777
- E-mail: overseas@tvt.net.cn.
Please read this instruction carefully before using the product and keep it for further reference. All the examples and pictures used here are for reference only. The contents of this manual are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>