TVT DIGITAL TD-E2137 Video Intercom Indoor Station User Guide
- June 12, 2024
- TVT DIGITAL
Table of Contents
TVT DIGITAL TD-E2137 Video Intercom Indoor Station
Package
-
Device
-
Quick Start Guide
-
CD (optional)
-
Tapping Screw×4 Machine Screw×2
-
Drill Template
-
Plastic Screw Anchor ×4
-
Bracket
-
Cable
Overview
Cable Connection
Note:
*Only when 12VDC power supply is used to power the indoor station, can the power output be available. The power output will not take effect when PoE power supply is used.
Installation
Wall Mounting without Junction Box
-
Place the drill template onto the wall and then drill the holes according to it.
-
Insert the screw anchors into the screw holes and then install the bracket onto the wall with four tapping screws.
Note: The tip of the bracket must be on the top when installing. -
Hook the device to the bracket from left to right .
Wall Mounting with Junction Box
-
Install the bracket onto the junction box with two machine screws.
Note: The tip of the bracket must be on the top when installing. -
Hook the device to the bracket from the left to right.
Note: Push the device from right to left to remove
About This Manual
All pictures, images, icons and snapshots in this manual are for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. The manual will be updated according to the product improvement and are subject to change without prior written notice.
Legal Disclaimer
To the maximum extent permitted by applicable law, the product described, with
its hardware, software, software and firmware, is provided “as is”, with all
faults and errors, and our company makes no warranties, express or implied,
including particular purpose, and non-infringement of third party. In no event
will our company, offices, or agents be liable to you for any special,
consequential, incidental, or indirect damages, including, among others,
damages for loss of business profits, business interruption, or loss of data
or documentation, in connection with the use of this product, even if our
company has been advised of the possibility of such damages. With regard to
the product with internet access, the use of product shall be wholly at your
own risks. Our company shall be irresponsible for abnormal operation, privacy
leakage or other damages resulting from cyber attack, hacker attack, virus
inspection, or other internet security risks; however, our company will
provide timely technical support if necessary.
During the use of the device, pleas strictly abide by applicable law. In the
event of any conflicts between this manual and the applicable law, the later
prevails.
Installation and Use
Please use our product according to the following safety instructions and warnings.
Do not place the camera in extremely hot, cold, dusty or damp location.
Do not expose it to high electromagnetic radiation.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems caused by unauthorized repair or maintenance.)
Do not drop the camera or subject it to physical shock.
Keep away from liquid while in use.
Do not touch the screen with sharp objects.
If cleaning is necessary, please use clean cloth to wipe it gently, avoiding water or alcohol.
Default Password：
Configuration PWD ：123456
Arming/disarming PWD ：123456
Unlocking PWD ：Null
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body