Sunbeam SAP0950WH Fresh Control Air Purifier User Guide

Sunbeam SAP0950WH Fresh Control Air Purifier

Sunbeams Safety Precautions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include:

• Read all instructions before using the appliance.
• To avoid fire or shock hazard, plug the appliance directly into appropriate electrical outlet.
• If the filter is covered by a bag when shipped, remove plastic bag before use and keep away from children.
• Keep the cord out of heavy traffic areas. To avoid fire hazard, never put the cord under rugs, near heat registers, radiators, stoves, or heaters.
• To protect against electrical hazards, do not immerse the appliance or use near water or other liquids.
• This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance b a person responsible for their safety. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Keep the appliance and its cord out of reach of children.
• Always turn the appliance off before unplugging it.
• Always unplug the air purifier before moving or cleaning the unit, opening the filter chamber cover, changing the filters and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
• Never drop or insert any objects into the openings of the unit.
• Do not operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair.
•  Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Do not use outdoors.
• Never place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.
• Keep unit away from heated surfaces and open flames.
• Do not place anything on top of unit.
• Never use detergents, gasoline, glass cleaner, furniture polish, paint thinner or other household solvents to clean any part of the appliance.
• This appliance should only be used in a room with temperatures between 10° C and 40° C.

WARNING: To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device.

• Do not place the appliance on a walkway or where someone may trip over it. Misplacement of the appliance may cause a trip and fall.

CAUTION: To prevent risk of electric shock, remove cord plug from outlet before opening appliance. To prevent risk of fire, inspect and clean equipment regularly as noted in this manual.

Get to know your air purifier

1. Control panel
2. Filtered air outlet
3. True HEPA filter
4. Bottom cover
5. Fan speed settings
6. Ioniser
7. On/off button
8. Air quality indicator light/ Filter replacement indicator
9. Timer
10. Air quality indicator
11.  Air Quality Sensor Compartment Door

Control panel and features

On/Off button
Turns unit on or off.

Fan speed settings
Adjusts the speeds between I (low), II, III (high), Auto. Auto mode automatically adjusts the speed to improve the air quality in the room.

Ioniser
Turns the ioniser on and off depending on your preference.

Timer
Sets a timer for 2, 4 or 8 hours.

Air Quality Indicator light On/Off
Toggle On/Off.

Filter replacement indicator
When its time to replace your Filter, the Air Quality Indicator will turn red and flash, (Air Quality Indicator is the “ring light around outside of Control Panel) The Filter Indicator Button will flash also, (Press and hold for 3 seconds to reset, when you change filter)

Air Quality Indicator
Indicates the surrounding air quality.

Features of your air purifier

Pre-Filter
The pre-filter captures large particles from the air such as dust, hair, pet dander to help extend the filter’s efficiency and life.
True HEPA filter
Your air purifier features a True HEPA filter which removes up to 99.97% of airborne dust and pollen as small as 0.3 microns and helps reduce smoke, mould spores and pet dander from the air passing through the filter.
Activated Carbon Filte r
This porous filter is specifically designed to absorb and neutralise odours, vapours and gases from cooking, smoke, chemicals, pets, and other unwanted scents.
Ioniser
This appliance has an ioniser feature which releases negative ions into outgoing filtered air to help the air purification process.
What are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us in the air, water, and ground. Both positive and negative ions are colourless, odourless, and completely harmless.
How does the ioniser work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. The larger particles are then more easily captured by the filter system.

Important notes:
Your ioniser may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged. After extended use, you may notice dust around the grilles or panels.

• This is caused by negative ions exiting the air outlet, evidence of the ioniser’s air cleaning effectiveness.
• You can remove the dust with a soft brush or clean, damp cloth. Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.
• This may occur more frequently when the filter is nearing the end of its useful product life and unable to capture as many charged particles.
• Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filters and interfere with the ionisation process.

Getting started

Installing the True HEPA filter

1. Turn OFF and unplug the air purifier.
2. Locate the filter cover at the bottom of the unit.
3. Rotate the knob counterclockwise to remove the cover and expose the filter (Figure 1-2).
4. Remove the plastic bag from the filter and re-insert the filter (Figure 3).
5. Re-align the filter cover and turn the knob clockwise to close.
6. Your unit is equipped with a 3-in-1 True HEPA filter that lasts up to 12 months, depending on usage.

Operating instructions

1. Place the unit on a dry, stable, and firm surface. Make sure not to block the top air outlet vent and air intake grill.
2. Plug unit into appropriate electrical outlet. Note: The display lights and air quality indicator will initially flash on and then turn off. The power button will remain illuminated when the unit is plugged in.
3. Tap the power button to turn the unit ON.
4.  When starting up, the appliance will operate in Auto mode by default.
5. To select a desired fan speed, tap the fan button to cycle through the speeds AUTO, III (high), II , I (low) until the desired speed setting is illuminated.
6. To set the timer for 2, 4 or 8 hours, tap the timer button until the desired setting is illuminated. When the set time has elapsed, the appliance will automatically switch off. To deactivate the timer, press and hold the timer button for 3 seconds or tap the timer button repeatedly until the timer setting lights are turned off.
7. To turn the ioniser ON, press the button once until the white LED light next to the button is illuminated. Press the button again to turn the ioniser OFF.
8. To turn the air quality indicator light ON, press the button. To turn the air quality indicator light OFF, press the button once more.
9. Important: Always turn OFF and unplug the unit when not in use.

Care and maintenance

• Before cleaning the air purifier, always turn OFF and unplug the unit.
• Clean the exterior surface with a clean, damp cloth.
• The top air outlet vent can be cleaned of dust with a small, soft brush.
• If you would like to clean the inside of your filter compartment, ONLY use a dry, soft cloth to wipe it down.

WARNING: Do not allow moisture to come into contact with the main housing of the air purifier. NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.

Air quality sensor maintenance

Open the small door compartment and use a vacuum cleaner for about 10 seconds at the lowest speed setting. It is recommended to do this once every two months.

How to replace the True HEPA filter

It is recommended to replace the 3-in- 1 True HEPA filter every 12 months depending on usage.

1. The filter replacement indicator light and air quality indicator will flash when it’s time to replace the filter.
2. Turn OFF and unplug the air purifier.
3. Locate the filter cover on the bottom of the unit.
4. Rotate the knob counterclockwise to remove the cover and expose the filter (Figure 1-2 on the previous page).
5. Remove and discard the filter and re-insert a new filter (Figure 3 on the previous page).
6. Re-align the filter cover and turn the knob clockwise to close.
7. Plug the unit and turn the power ON.
8. To reset the filter status on the air purifier, press & hold the filter replacement button for 3 seconds. The filter icon will Flash 3 times and then go off.

Information on where to purchase replacement filters can be found on our website at www.sunbeam.com.au.
WARNING: Only use the original Sunbeam filter model SAPF360D specially intended for this appliance. Do not use any other filters.

Troubleshooting and support

unit is properly plugged in and outlet is working.
The appliance is not switched on.| Make sure unit is turned ON.
The filter is not properly installed.| Make sure filters are properly installed.
The filter cover is not fully assembled.| Check that the filter cover is correctly assembled by re-aligning the filter cover and turn the knob clockwise to close.
The air flow has decreased.| The air intake grille and filtered air outlet may be obstructed.| Turn OFF and unplug the appliance. Remove any obstructions blocking the air intake grille, fabric pre-filter and filtered air outlet.
The filter is nearing the end of its useful product life.| Check the condition of the filters and replace if necessary.
Pre-installed filter is covered by a protective plastic packaging.| Check filter to remove any plastic packaging and re-install the filter.
The air purifier is making a loud noise.| Pre-installed filter is covered by a protective plastic packaging.| Check filter to remove any plastic packaging and re-install the filter.
The ioniser may produce an occasional popping or cracking sound.| This is normal and occurs when a small buildup of ions is discharged.

This product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).

References

• Sunbeam
• Sunbeam

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>