TOUPTEK SkyEye62AM Full Frame Monochrome Deep Sky Astronomy Camera User Manual

TOUPTEK SkyEye62AM Full Frame Monochrome Deep Sky Astronomy Camera

Specifications

Description and Features

With full frame sensor, precise temperature regulation, ultra-low readout noise and zero amp-glow, The SkyEye62AM camera is mainly used for deep sky photo shooting. Its extraordinary performance and extensive usage will give you great astrophotography experience.

The features of SkyEye62AM are listed below:

• IMX 455 Mono CMOS Sensor
• Resolution: 9568 x 6380
• 3.76 μm Square Pixels
• Full Frame Optical Format
• 16-bit ADC
• 512 Mbyte Memory Onboard
• Precise Temperature Regulation
• G Sensitivity: 435.5mV with 1/30s
• Zero Amp-Glow
• Ultra-Low Noise: 0.9 to 1.95 e- (Low Noise Mode)
• Support Low Noise Mode/ High Frame Rate Mode (6.2 FPS at all Pixel Readout 8 bit)
• Support HCG Mode/ LCG Mode
• SNR Max: 47.1 dB (Low Noise Mode)
• Dynamic Range: 88.3 dB (Low Noise Mode)
• -30 C below ambient under short exposure/ -35 C under long exposure time (> 1s)

SkyEye62AM Specifications and Performance

Camera Specifications

Table 1 SkyEye62AM Technique Specifications.

Max FPS at Resolution (USB 3.0)

| 16bit| 8bit
3.1 FPS @ 9568*6380

9.4 FPS @ 4784*3190

27.8 FPS @ 3184*2124

| 6.2 FPS @ 9568*6380

18.8 FPS @ 4784*3190

55 FPS @ 3184*2124

Max FPS at Resolution (Low Noise, USB 3.0,)

| 16bit| 8bit
1.9 FPS @ 95686380 (Low Noise Mode is only available in All Pixel Readout Mode)| 6.2 FPS @ 95686380 (Low Noise Mode is only available in All Pixel Readout Mode)

Max FPS at Resolution (USB 2.0)

| 16bit| 8bit
0.4 FPS @ 9568*6380

1.5 FPS @ 4784*3190

3.3 FPS @ 3184*2124

| 0.7 FPS @ 9568*6380

2.9 FPS @ 4784*3190

6.6 FPS @ 3184*2124

Max FPS at Resolution (Low Noise, USB 2.0)

| 16bit| 8bit
0.3 FPS @ 95686380 (Low Noise Mode is only available in All Pixel Readout Mode)| 1.2 FPS @ 95686380 (Low Noise Mode is only available in All Pixel Readout Mode)
Shutter Type| Rolling Shutter
Exposure Time| 0.1ms – 3600s
Gain| 1x – 150x
SNR| 47.1 dB
Dynamic Range| 88.3 dB (Low Noise Mode)
Read Noise| 2.8 – 0.97 e-
Read Noise (Low Noise Mode)| 1.95 – 0.9 e-
Read Noise (LCG)| 4.29 – 1.47 e-
QE Peak| >80%
Full Well| 51ke- (111ke- @LCG)
ADC| 16bit
DDR3 Buffer| 512MB (4Gb)
Connection Port| USB3.0/USB2.0
CameraAdaptor| M54 ´ 0.75
Protect Windows| IR CUT
Spectral Range| 380-690nm (with IR-cut Filter)
Capture/Control SDK| Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.)
Recording System| Still Picture and Movie
Camera Dimensions| Diameter 89 * Height 103 (mm)
Camera Weight| 0.718kg
Back Focus Distance| 17.5mm
Cooling:| Two stage TEC
Effective Cooling Temp:| -30°C below ambient under short exposure/ -35°C under long exposure (> 1s)

Supported OS

| Microsoft® Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit) OSx(Mac OS X)

Linux

Sony IMX455 Sensitivity
The sensor sensitivity of SkyEye62AM is 435.5mV with 1/30s.The sensitivity is measured with a testing standard lens with CM500S (t = 1.0 mm) as an IR-cut filter and image at F8.0. If the image is measured at F5.6, the result could have been 2 times of the current value.

16Bit ADC and ROI
The SkyEye62AM has built in 16bit ADC. It also has 12bit output mode for hardware binning and smaller resolution. The camera also supports hardware ROI, and the smaller the ROI size is, the faster frame rate is.
Table 2 SkyEye62AM Frame Rate at Different Resolution/Data Bit/Data Transfer(USB3.0/ USB2.0)

Bit & Interface

FPS

Resolution

| 16Bit ADC| 8Bit ADC
---|---|---
USB3.0| USB2.0| USB 3.0| USB 2.0
95686380| 3.1| 0.4| 6.2| 0.7
95686380(Low Noise)| 1.9| 0.4| 6.2| 0.7
47843190| 9.4| 1.5| 18.8| 2.9
31842124| 27.8| 3.3| 55| 6.6

DDR3 Buffer
SkyEye62AM camera has a 512MB (4Gb) DDR3 buffer, which helps maintain the stability of data transmission, because image data can be temporarily buffered without being sent hastily to the receiver.

Binning
The SkyEye62AM supports digital binning from 1 1 to 8 8 in either stacking or averaging method, and hardware binning from 11 to 33 in averaging method. Hardware pixel binning is much faster than software binning.

Conversion Gain Switch
SkyEye62AM supports HCG and LCG mode switches. Under LCG mode, the full well can reach 111ke-.

Power and Cooling System for Precise Temperature Regulation
USB3.0 is used for the camera driving and data transfer.

The cooling system of SkyEye62AM is two-stage Thermoelectric Cooling (TEC) with controllable electric fan assisting heat dissipation. The working temperature can be regulated to specific number, and effective temperature drop can be -35C from ambient temperature. Such efficient cooling system guarantees the stability of ultra-low noise mode and quality of the camera image.
The TEC system is controlled by PID algorithm, which allows the TEC to be precisely regulated towards the target temperature with 0.1C deviation.

Zero Amp-Glow
The SkyEye62AM has been carefully designed and is able to achieve zero amp- glow photo shooting. Figure 3 and Figure 4 show the different cameras at 20C and 5-minute exposure time with and without amp-glow. One can find that SkyEye62AM camera captured image has zero amp-glow.

Camera Performance Analysis
Camera performance can be evaluated with e-/ADU, Read Noise, Full Well and Dynamic Range.

e-/ADU: The sensors found in cameras used for vision applications have pixels that convert incoming photons into electrons. Gain on a CCD /CMOS camera represents the conversion factor from electrons (e-) into digital counts, or Analog-Digital Units (ADUs). Gain is expressed as the number of electrons that get converted into a digital number, or electrons per ADU (e-/ADU).

Read Noise : Read Noise is the most important reference to measure the performance of a camera. Lower read noise usually means better SNR and better quality of image. Read Noise is created within the camera electronics during the readout process as the electrons are subjected to the analog to digital conversion, amplification and processing steps that enable an image to be produced.

Full Well: The electrons are held in each pixel and are converted into electrical charge which can be measured to show the amount of light that has fallen on each pixel. The maximum electrical charge possible is termed “full well capacity”. Under the same conditions such as noise and A/D converter quality, the greater full well capacity a sensor has, the wider dynamic range the sensor has. As there is a limit to the depth to which pixels can be made, the full well capacity is often proportional to the frontal area of the light gathering element of the pixel.

Dynamic Range is the ratio between the maximum output signal level and the noise floor at minimum signal amplification (noise floor which is the RMS (root mean square) noise level in a black image). The noise floor of the camera contains sensor readout noise, camera processing noise and the dark current shot noise. Dynamic range represents the camera’s ability to display/reproduce the brightest and darkest portions of the image and how many variations in between. This is technically intra-scene dynamic range. Within one image there may be a portion that is in complete black and a portion that is completely saturated.

For the SkyEye series camera, the Gain Value is in xxx% mode. Here xxx is used as the x axis (Gain Value) for the description of the camera performance

• ??? ????(??) = 20 ∗ ???10[???(???? ?????)/100]
• ???(???? ?????) = 100 × 10(??? ????(??)/20

SkyEye62AM has a significantly low read noise: 0.9 – 1.95 e- (Low Noise Mode). It is more impressive that this camera comes with low noise mode, which means users could get even lower readout noise by selecting low noise mode while the frame rate only drops a little as sacrifice.

Camera setting used for performance analysis in HCG mode is as follow:

• Full resolution
• RAW 16 Bit mode
• Temperature: -5℃

Table 3 Sensor Analysis Data in HCG Mode

SensorAnalysis Data

Gain Value| 100| 158| 251| 398| 630| 1000| 1584| 2511| 3981| 6309| 10000| 15000
Rel Gain (dB)| 0.00| 3.96| 8.00| 12.03| 16.02| 20.04| 24.02| 27.98| 32.03| 36.02| 39.96| 42.91
e- /ADU| 0.78| 0.49| 0.31| 0.2| 0.12| 0.08| 0.05| 0.03| 0.02| 0.01| 0.01| 0.01
Read Noise Low Noise (e-)| 1.95| 1.68| 1.61| 1.66| 1.75| 1.71| 1..70| 1.73| 1.73| 1.69| 1.38| 0.90
Read Noise Normal (e-)| 2.8| 2.45| 2.06| 2.06| 2.16| 2.13| 2.19| 2.12| 2.09| 2.02| 1.66| 0/97
Full Well (ke-)| 50.8| 32.3| 20.3| 12.8| 8.1| 5.1| 3.2| 2.0| 1.3| 0.8| 0.5| 0.4
DR (stop)| 14.15| 13.7| 13.3| 12.6| 11.9| 11.2| 10.5| 9.9| 9.2| 8.6| 8.2| 8.6

Camera setting used for performance analysis in LCG mode is as follow:

• Full resolution
• RAW 16 bit mode
• Temperature: -5 ℃

Table 4 Sensor Analysis Data in LCG Mode

SensorAnalysis Data

Gain Value| 100| 158| 251| 398| 630| 1000| 1584| 2511| 3981| 6309| 10000| 15000
Rel Gain| 0.00| 3.99| 8.03| 11.90| 15.89| 19.90| 23.87| 27.81| 31.83| 35.84| 39.83| 43.12
e- /ADU| 1.69| 1.06| 0.67| 0.42| 0.27| 0.17| 0.11| 0.07| 0.04| 0.03| 0.02| 0.01
Read Noise Low Noise(e-)| 2.72| 2.05| 1.51| 1.55| 1.7| 1.7| 1.82| 1.87| 1.86| 1.96| 1.73| 1.10
Read Noise (e-)| 4.29| 3.36| 2.27| 2.25| 2.41| 2.45| 2.62| 2.59| 2.49| 2.63| 2.40| 1.47
Full Well(ke-)| 110.4| 69.2| 43.5| 27.6| 17.4| 11.0| 6.9| 4.4| 2.8| 1.7| 1.1| 0.8
DR(stop)| 14.7| 14.3| 14.2| 13.6| 12.8| 12.1| 11.4| 10.7| 10.1| 9.4| 8.8| 9.0

Product Package and Connections

Packing List

Table 5 SkyEye62AM Packing List

Standard Package

A| 3-A safety equipment case: L:26.2cm W:24.0cm H:12.4cm (1pcs, 3.9Kg/ box)
B| SkyEye camera (M54Fx0.75 mount)
C| Power adapter: input: AC 100~240V 50Hz/F60Hz, output: DC 12V 3A
D| High-Speed USB3.0 A male to B male gold-plated connectors cable /1.5m
E| CD (Driver & utilities software, Ø12cm)
F| Hex wrench H 2.0
G| M54M-M48F 21mm extender
H| M48M-M48F 16.5mm extender
I| M48M-M42F adapter

Camera Dimension and Its Mount

Table 6 Dimension and Mount of SkyEye62AM

Camera Outline and Interface

Table 7 Camera Outline and Interface List

color camera
2| M54F ´ 0.75 thread
3| Air inlet
4| Thermo outlet
5| USB 2.0 HUB
6| USB 3.0/ USB 2.0 port
7| DC 12V 3A power port, 5.5 ´ 2.1mm
8| LED indicators: 1) Power LED. 2) System LED. 3)TEC LED. 4)Fan LED

Camera Mechanical Connection with Adapter
The SkyEye62AM can be connected to a telescope with proper adapter, or the camera lens. The most common adapters are already included in the package, but we also provide some specific adaptors based on the requirement.
The female flange to the sensor is 17.5mm. User can make it to 55mm back focus distance with the 21mm and 16.5mm extender included in the camera package. Please check Figure 10 for details.

Table 8 Camera and Its Adapter Connections

camera, IR-cut for color camera
M54M-M48F 21mm extender| 21mm with M48Fx0.75mm for M48M´ 0.75 telescope
M48M-M48F 16.5mm extender| 16.5mm with M48Fx0.75mm for M48M´ 0.75 telescope
M48M-M42F 0mm adapter| 0mm with M48Fx0.75mm for M42F´ 0.75 telescope

Camera Mechanical Connection with Lens

Table 9 Camera and Lens Connection

Camera Tilt Adjustment
SkyEye62AM has the tilt adjustment ability. There are 3 sets of screws that can be used to tilt the sensor, making it parallel with the telescope, two screws per set for screw in /out.
One can refer to below:

Table 10 Camera Tilt Adjustment

1

| Take a starred image with the camera, user can easily find out the tilt part in the image through the software(such as siril、ccdinspector、astap), and then adjust one or more sets of flange adjustment screws on the camera

corresponding to the imaging result.

2| Take another image after the sensor tilt adjustment, and compare it with the previous one in the software. If the tilt issue is reduced, that means the adjustment is correct. Otherwise, the adjustment is wrong.
3| Repeat step 2 until the stars in all corners are perfect.

Camera Electric Connection with Accessories
On the back side of SkyEye62AM, there are 3 connection ports: DC 12V/3A power port, USB3.0/ USB2.0 port and USB-HUB.
Due to the significantly larger power consumption of IMX455, SkyEye62AM (including the cooling system) is now booted up only by 12V/3A power supply. USB3.0 no longer works as a power source but only as a data communication method. The USB-HUB provides connection with other devices, which allows user to avoid the mess of cable management. Once another device is connected through the USB-HUB, it will be connected to PC device through the USB3.0/USB2.0 port.

Table 11 Camera Electric Connection

USB HUB for accessories

| To filter wheel with USB2.0 cable
To guiding camera with USB 2.0 cable
Power port| DC12V/3A

SkyEye62AM and Its Software

Application Installation
For software, customers are welcomed to go to our software website: https ://touptek-astro.com/downloads/ , to download the latest ToupSky. The SkyEye can also be used with ASCOM, DirectShow SDK. If the third-party software is compatible with these SDK, customers can also download the software driver from our website and install the drivers into the third-party software.

ToupSky is ToupTek astronomy camera’s Windows application. ToupSky is a professional software integrated with camera control, image capture & process, image browse, and analysis functions. ToupSky was born with the following features:

Windows:

• x86: XP SP3 or above; CPU supports SSE2 instruction set or above
• x64: Win7 or above

Features:

• Fully control of the camera
• Trigger mode and video mode support (raw format or RGB format)
• Automatic capture and quick record function
• Multi-language support
• Hardware ROI and digital binning function
• Extensive image processing functions, like image stitching, live stacking, flat field correction, dark field correction, etc.

Supported Camera
All ToupTek astronomy cameras

User-friendly UI Design

• Well-arranged menus and toolbars ensure quick operating;
• The unique design of 3 sidebars — Camera, Folders, Undo/Redo are orderly classified；
• Convenient operating method (Double click or right-click context menu) as much as possible;
• Detailed help manual;

Professional Camera Control Panel

Capture & Resolution| Set the live and snap resolution and snap the image or record video;
---|---
Exposure & Gain| Auto exposure (exposure target preset) and manual exposure (exposure time can be inputted manually); Up to 5 times gain;
Color Balance| Advanced single-click intelligent white balance setting, temperature and tint can be manually adjusted;
Color Adjustment| Hue, saturation, brightness, contrast, gamma initialization adjustment;
Frame Rate| Adjustment of frame rate available for different computer configurations;
Flip| Check the “horizontal” or “vertical” option to correct the sample direction;
Sampling| Bin mode can obtain low noise video stream; Skip mode obtains sharper and smoother video stream. Support video stream

histogram extension, Negative and positive switching, Gray calibration, Clarity factor for focusing etc.

Bit Depth| Switch between 8 bits and 12 bits. 8 bits is the basic Windows image format. 12bits will have higher image quality but moderate FPS.

ROI

| ROI, Region of interest. This function can set the ROI on the video window. When the ROI group was expanded, a dotted rectangle with “Handles” will appear around the video window that will let you alter the ROI. Use mouse button to adjust

the ROI size. If ROI is ok, click Apply will set the video to ROI size, Defaults will return to the original size.

Dark Field Correction

| To Enable the Dark Field Correction, one should capture the dark field image first. After the images are captured, the Enable button will be clickable. Checking the Enable button will enable the Dark Field correction. Unchecking it will disable the Dark Field Correction.
Cooling| Set the TE-Cooling target temperature and set the fan On/Off;
Parameters| Load, save, overwrite, import, export self-defined parameters of camera control panel (including calibration information, exposure and color setting information);

Practical Functions with Good Results

Video functions| Various professional functions: Video broadcast; Time lapse capture; Video record; Video stream grid; Image stitch; Video scale bar, date etc.
---|---
Image    Processing    and Enhancement| Control and adjust image by denoise, sharpen, color toning deinterlace, all kinds of filtering algorithm and mathematical morphology algorithm, range, binary, pseudo color, surface plot and line profile ital..
Image Stacking| Image stacking adopts advanced image matching technology. With the recorded video, regardless of shifting, rotation, scaling, the high- fidelity image can be stacked to decrease the image noise.

Powerful Compatibility

(32 & 64 bit), Mac OSX, Linux
Language Support| Unlimited language support, currently available in Simplified Chinese, Traditional Chinese, English, Russian, German, French, Polish and Turkish

Hardware Requirement

PC Requirements

| CPU: Intel Core 2 2.8GHz or higher
---|---
Memory:2GB or more
USB port: USB3.0/USB2.0 port
Display:17” or larger
CD-ROM

SkyEye62AM and Dshow

• ToupTekDshowAstroSetup (Click the left blue link to download)
• DshowAstro is an interface driver providing Dshow standard support for ToupTek USB astronomy camera

Supported OS: Windows:

• x86: XP SP3 or above; CPU supports SSE2 instruction set or above
• x64: Win7 or above

Supported Camera:

All ToupTek astronomy cameras

SkyEye62AM and the 3rd Party Software
Support Software

ASCOM Platform
All AstroCam telescope camera drivers request to install ASCOM platform, free.

http://www.ascom-standards.org/index.htm
You can download the ASCOM package from : http://ascom- standards.org/Downloads/Index.htm

• PHD Guiding
  A popular free guide software: http://openphdguiding.org/
  ToupTek’s telescope camera support Native/ASCOM/WDM driver to run the video.

• Nebulosity
  A popular cooled camera control/image process software directly supported via ASCOM.

• MetaGuide
  Autoguiding software with novel method to avoid the atmospheric agitation. The latest version support GCMOS01200KPB and the guide port: http://www.astrogeeks.com/Bliss/MetaGuide/

• MAXIMDL
  Famous full functional CCD Control/Image Process software. Popular used in US.

• AstroArt
  Famous full functional CCD Control/Image Process software. Popular used in Europe.

• FireCapture
  Great free planetary capture software. Support part of AstroCam series telescope camera.

• SharpCAP
  A nice free planetary capture software support WDM cameras includes AstroCam series telescope camera.

• Registax
  A popular free planetary stacking and processing software.

• AstroStack
  A planetary stacking and process software.

• DeepSky Stacker
  A free deep sky image stack and process software.

Service

• For software upgrades, please refer to “Download” on our official website: https://ToupTek-astro.com//
• For customers who purchase the cameras from local dealer, please contact your dealer for more inquiry. For technical support, please contact e-mail address: astro@ToupTek.com.

FAQ

• Q: Where can I download the latest version of the SkyEye62AM User Manual?
  • A: You can download the latest version from touptek-astro.com.

References

• Download Center
• ToupTek | Astronomical camera | Astronomy camera
• VB Shop
• ASCOM - Standards for Astronomy
• astrogeeks.com/Bliss/MetaGuide/
• ToupTek | Astronomical camera | Astronomy camera
• ToupTek | Astronomical camera | Astronomy camera
• ToupTek Astro: Electric filter wheel & Astronomical Cameras | Pro Astrophotography Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>