nVent CADDY IDS95LN Independent Support Clip Owner’s Manual

nVent CADDY IDS95LN Independent Support Clip

Product Information

Specifications

• Catalog Number: IDS95LN
• Material: Spring Steel
• Finish: nVent CADDY Armour
• T-Grid Size: 9/16
• Flange Thickness: 5/16
• Screw Diameter: 1/4
• Screw Length: 9/16
• Static Load: 65 lb

FAQ

• Q: Where can I find nVent’s product instruction sheets?
  • A: Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
• Q: What should I do if I encounter a product malfunction?
  • A: If you experience a product malfunction, stop using the Independent Support Clip immediately and contact nVent customer service for assistance.
• Q: Can I use the Independent Support Clip for fixtures weighing more than 65 lb?
  • A: No, it is not recommended to exceed the specified static load capacity of 65 lb for the Independent Support Clip. Using the clip beyond its capacity may result in product malfunction and potential hazards.
• Q: Can I reuse the Independent Support Clip?
  • A: It is not recommended to reuse the Independent Support Clip. For optimal performance and safety, it is advised to use a new clip for each installation.
• Q: Can I modify the Independent Support Clip?
  • A: No, any modification or alteration to the Independent Support Clip may compromise its functionality and safety. It is important to use the clip as instructed and avoid any unauthorized modifications.

Features

• Provides a means of independent support of fixtures
• No tools required for installation
• Includes mounting hardware

Product Usage Instructions

Installation

1. Ensure that the T-Grid is clean and free from debris.
2. Position the Independent Support Clip at the desired location on the T-Grid flange.
3. Align the mounting holes of the Independent Support Clip with the holes in the T-Grid flange.
4. Insert the provided screws through the holes and tighten them securely using a screwdriver or a suitable tool.
5. Repeat the above steps for each Independent Support Clip needed.

Fixture Support

The Independent Support Clip is designed to provide support for fixtures. Follow these steps to use it:

1. Select the fixture you want to install.
2. Attach the fixture to the Independent Support Clip using the appropriate mounting hardware.
3. Ensure that the fixture is securely attached to the Independent Support Clip.

Maintenance

To ensure the continued functionality and safety of the Independent Support Clip, perform regular maintenance:

• Inspect the Independent Support Clip periodically for any signs of damage or wear.
• If any damage or wear is detected, replace the Independent Support Clip immediately.
• Keep the Independent Support Clip clean and free from debris.

FEATURES AND PRODUCT ATTRIBUTES

FEATURES

• Provides a means of independent support of fixtures
• No tools required for installation
• Includes mounting hardware

PRODUCT ATTRIBUTES

• Material: Spring Steel
• Finish: nVent CADDY Armour
• T-Grid Size: 9/16″
• Flange Thickness: 5/16″
• Screw Diameter: 1/4″
• Screw Length: 9/16″
• Static Load: 65 lb

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

CONTACTS

North America

• +1.800.753.9221
• Option 1 – Customer Care
• Option 2 – Technical Support

Europe

• Netherlands: +31 800-0200135

Europe

• Germany: 800 1890272
• Other Countries: +31 13 5835404

APAC

• Shanghai: + 86 21 2412 1618/19
• Sydney: +61 2 9751 8500

Our powerful portfolio of brands:

• CADDY
• ERICO
• HOFFMAN
• RAYCHEM
• SCHROFF
• TRACER

nVent.com

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>