Sigma TAB A1025 Protected Tablet User Manual

Sigma TAB A1025 Protected Tablet

Instruction

Dear Client! Thank you for purchasing Sigma mobile product!
Please read this manual before using the device to ensure safe and proper use and prevent it from damages.
Software, design features and content of manual may be changed to improve the product without a prior notice.
Manufactures and distributors are not liable for case damages as well as the damages caused due to incorrect or improper exploitation.

WARNING! Protection against dust and water

• This device is IP68 protected against penetration of water and dust. This means water resistance and protection against dust penetration. This protection is guaranteed provided tightly closed caps that cover the SIM card slot and USB Type-C and Audio connectors. Follow these tips to preserve water and dust protection properties of your device.
• The tablet has been tested and certified for water and dust resistance in accordance with international standards (IEC 60529 «Degrees of Protection Provided by Enclosures [IP code]») under the following conditions: 15-35 ° C, fresh water, submersion to 1.5 m, for 30 minutes. Notwithstanding compliance with these requirements, the device may still be damaged in some situations.
• Be careful with the phone’s connectors rubber covers when used in water, and observe general safety rules.
• Do not immerse the device to water at depth exceeding 1.5m and do not keep it in water for more than 30 minutes.
• Do not immerse the device to any liquid other than fresh water, such as salty water or alcoholic beverage. Above liquids may penetrate the device faster.
• Do not connect the charger immediately after moisture enters the phone. Wipe the device thoroughly if wet. If another liquid, e.g. salty water or alcohol, has got onto the device, wash it with fresh water and wipe it thoroughly. Failure to follow these guidelines may affect the operation and appearance of the device
• When the device is immersed in water or water enters microphone or speaker openings, there may be a temporary deterioration in sound when playing music. Sound quality will be restored after full drying.
• The touch screen and some features of the phone may not work properly when used in water or after immersion in water.
• Do not expose the appliance to water pressure
• Shock resistance is not regulated by the standart. The tablet, due to additional seals and strong fasteners, has better vibration resistance, but requires careful use. Dropping or striking the phone may result in deterioration of the phone’s resistance to water and dust penetration
• WARNING! Openings for microphone, speakers, and atmospheric pressure compensation opening near the camera of the device are protected by waterproof membranes. Warranty void and no waterproof if membranes damaged of broken.

If the moisture in your phone is not due to factory defects and mechanical damage or loose plugs closed – warranty of the device will not be done.

Package Contents

• Tablet PC Sigma mobile TAB A1025
• Network charger
• USB-TYPE-C cable
• Manual
• Warranty Card

Size 170251.214.2mm
The manufacturer reserves the right to change complement, specifications and appearance
The manufacturer reserves the right to change complement, specifications and appearance.

Specifications

• The frequency of the processor program may be limited to lower values.
• The actual memory size may be less due to the pre-installed operating system and applications.

Android™ 11| Go straight to the stuff that matters most. Because Android 11 is optimized for how you use your phone. Giving you powerful device controls. And easier ways to manage conversations, privacy settings and so much more.
---|---
Screen| 10” resolution 19201200 px
CPU| Mediatek Helio P22, 8 Core, Up to 2.0GHz.
Camera| 16 Megapixel on the back and 16 Megapixel on the front side of device to take photos and record video.
Memory| Operational – 4 GB, built – 64 GB**. The possible storage extension by micro-SD cards up to 128 GB.
Dual SIM, 3G, LTE| 2 SIM cards that support 3G technology and LTE – for using Internet and to make calls.
WI-FI 802.11 B/G/N| Connection Interface to the wireless network
GPS| The ability to determine the location and to use navigation programs.
Battery| 10000 мАh., built-in

SAFETY AND SECURITY

• Do not disassemble device and do not repair it by yourself.
• Permitted outside temperature operating mode: 0 to 35*C.
• Storage temperature:-5 to +45*C.
• Relative humidity: 5% to 90%, non-condensing (25 ° C).
• Avoid the contact with fire to avoid explosion or fire.
• Do not expose the device or the battery to very cold or very hot temperatures.
• Avoid the water penetration on the device.
• Do not drop device and avoid its hitting by other objects.
• Do not expose the tablet to the heavy mechanical impact.
• Avoid contacts with sources of electromagnetic radiation.
• For cleaning device do not use chemicals or cleaning means; always turn the device off before cleaning.
• Do not disconnect device from the PC while formatting and copying files.
• When using the device as a removable disk always follow the instructions. Any false step may lead to loss of files.
• Create a backup copy of important data on the PC, as the device repair or other causes may result the data loss.
• Use only accessories recommended by the manufacturer.
  To avoid of getting heavy metals, acids, lye in water or soil, causing significant damage to the environment, utilize used battery according to the law. The legal liability arises in case of infraction about the utilization norms.

Headset usage

• For safety do not use headset while driving the car or bicycle.
• Reduce the volume passing roadway.
• Using the headset, do not listen to music at a high volume for a long time – reversely, it may lead to the hearing problems.
• Stop using the headset or reduce the volume if you hear the ringing in ears.

START

• Turn on: Press and hold a few seconds power button. Wait for the download process and lock screen appearance.
• Turn off: Press and hold for four seconds power button until the switching off interface appears. Choose the button, which confirms the switching off. The device turns off

Buttons and ports

Standby mode

In operation mode the short pressing on the power button leads the device to the standby mode, the screen goes dark.
The repeated short pressing on the power button leads the device out from the standby mode; the lock screen is showed on the display.
To unlock the screen, you may swipe from the bottom in any part of the screen. It is possible to protect yourself from unauthorized access in several ways:

• Locking by the graphical key;
• Locking by the password or PIN;

Button to additional menu
On the main screen and in the different programs might be the icon .
By pressing on it, the additional menu is opened for additional configuration and management.

Connection to 3G/4G network
To activate 3G/4G insert SIM-card of mobile operator in special slot on the tablet. Only after these actions turn on the phone, search 3G signal appears automatically. Turn off the connection to Wi-Fi before running the 3G function (if the phone was connected via Wi-Fi).
Attention: To avoid SIM-card damages turn off the phone before changing and removing SIM-card. Use standard SIM-cards accurately (SIM/Micro-SIM). It is not recommended to use SIM-cards adapter. Insert and remove the SIM-card without effort. Mechanical damage is not a guarantee case.

Indicator icons
The icons displayed at the top of the screen provide information about the status of the device. The icons listed in the table below are most common.

| No signal
---|---
| Signal strength
| Roaming (outside of normal service area)
| EDGE network connected
| UMTS network connected
| LTE network connected
| Wi-Fi connected
| Bluetooth activated
| GPS activated
| Call in progress
| Missed call
| Synced with the web
| New text or multimedia message
| Alarm activated
| Do not disturb mode activated
| Vibration mode activated
| Flight mode activated
| Error occurred or caution required
| Battery power level

Charging the battery

Charge the battery before using it for the first time.
Use only Sigma mobile approved chargers, batteries, and cables. Unapproved chargers or cables can cause the battery to explode or damage the device.

• When the battery power is low, the battery icon appears as empty.
• If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. Allow a depleted battery to charge for a few minutes before turning on the device.
• If you use multiple apps at once, network apps, or apps that need a connection to another device, the battery will drain quickly. To avoid losing power during a data transfer, always use these apps after fully charging the battery.

Charging steps
Connect the USB cable to the USB power adaptor, and then plug the end of the USB cable into the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty.
The device may be used while charging; in that case charging time is prolonged.
If the device receives an unstable power supply while charging, the touchscreen may not function. If this happens, unplug the charger from the device.
While charging, the device and the charger may heat up. This is normal and should not affect the device’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging.
If the device is not charging properly, take the device and the charger to a Sigma mobile Service Centre.
After fully charging, disconnect the device from the charger. First unplug the charger from the device, and then unplug it from the electric socket. To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging.

Installing a SIM-card and memory card

Install the SIM card (nanoSIM format) provided by the mobile operator and, if necessary, a microSD card.

1. Remove the tray that has SIM and microSD cards installed. For removing SIM tray use SIM extractor tool

2. Insert the SIM card and, if necessary, a microSD card.
   Attention! It is possible to use either two SIM cards (nanoSIM) or one SIM card and microSD card at the same time. Do not insert the memory card into the SIM card slot. If the memory card is stuck in the SIM card slot, contact the authorized Sigma mobile service center for safe removal. Be careful not to lose your SIM card and do not let others use it. Sigma mobile is not liable for any damage or inconvenience caused by the loss or theft of the cards.

3. Place the tray in the appropriate slot and secure it. WARNING! An incompletely inserted tray and an incorrectly closed plug can cause liquid to enter the device.

Your device accepts memory cards with maximum capacities of 128 GB. Depending on the memory card manufacturer and type, some memory cards may not be compatible with your device.

• Some memory cards may not be fully compatible with the device. Using an incompatible card may damage the device or the memory card, or corrupt the data stored in it.
•  Use caution to insert the memory card right-side up.
• The device supports the FAT and the exFAT file systems for memory cards. When inserting a card formatted in a different file system, the device asks to reformat the memory card.
• Frequent writing and erasing of data shortens the lifespan of memory cards. Attention! Take a look at the two ways of using the memory card that will be proposed, after turning on the smartphone. Choose the best suited variant.

MAIN TECHNIQUES

Touchscreen usage
It is recommended to use fingers when you use the touchscreen.
Attention! Do not allow the touchscreen to come into contact with other electrical devices. Electrostatic discharges can cause the touchscreen to malfunction. To avoid damaging the touchscreen, do not tap it with anything sharp or apply excessive pressure to it with your fingertips. The device may not recognize touch inputs close to the edges of the screen, which are outside of the touch input area. Leaving the touchscreen idle for extended periods may result in afterimages (screen burn-in) or ghosting. Turn off the touchscreen when you do not use the device.

Operate with fingers

Tapping
To open an app, to select a menu item, to press an on-screen button, or to enter a character using the keyboard on the screen, tap it with your finger.

Tapping and holding
Tap and hold an item or the screen for more than 2 seconds to access available options.

Dragging
To move an item, tap and hold it and drag it to the target position.

Double-tapping
Double – tap on a webpage or image to zoom in. Double – tap again to return. Swiping
Swipe to the left or right on the Home screen or the Apps screen to view other panels. You may swipe upwards or downwards to scroll through a webpage or a list of items such as contacts.

Spreading and pinching
Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to zoom out.

Screen turning
Many programs support the interface displaying in landscape or portrait format. If the device turns, the display turns automatically according to the new screen position.
Open notification panel and cancel the option Screen turning if you do not want the screen to turn.
Attention! Some programs do not support the Screen turning option. Some programs display different screen positions depends on the device position.

Notifications
When you receive new notifications, such as messages or missed calls, indicator icons appear on the status bar. To see more information about the icons, open the notification panel and view the details. To open the notification panel, drag the status bar downwards. To close the notification panel, swipe upwards on the screen. Scroll down to see additional notifications.
On the notifications panel you may view current device settings

• Settings : switch to device settings
• Mobile data: on/off mobile data
• Wi-Fi: Wi-Fi function on/off
• Bluetooth: on/off
• Sound mode: Sound, Vibro, Silent
• Flashlight: on/off Torch
• Screen shot
• Airplane mode: on/off
• Do not disturb function switch
• Location: on/off GPS function
• Underwater mode
• Auto-rotate (Screen Rotation): on/off automatically screen rotation
• Battery saver on/off
• Screen record
• Adjust the screen brightness
  To edit the notifications panel (add / remove buttons, reorder them), press the Edit key.

Home screen
Home screen is the starting point for accessing all of the device’s features. It displays widgets, shortcuts to apps, and more. To view other panels, swipe to the left or right.

Objects managing

• Moving items
  Tap and hold an item on the Home screen, and then drag it to a new location. To move the item to another panel, drag it to the side of the screen.

• Removing items
  Tap and hold an item, and then drag it to remove at the top of the screen. When the basket is red, let it off.

Folder usage
You can combine multiple shortcuts in folders on the home screen.
On the Home screen, tap and hold an app, and then drag it over another app. Drop the app when a folder frame appears around the apps. A new folder containing the selected apps will be created.
To move apps from a folder to the Home screen, tap the folder, and then drag an app to the Home screen.
To delete apps in a folder, tap the folder, and then drag the app you want to delete to Remove at the top of the screen. To rename the folder, tap the name.

Panels managing

• Adding new panel
  New panel is added automatically when the new object is added beyond the existing panels.

• Moving the panel
  On the Home screen, tap and hold an empty area to add, move, or remove a panel. Delete the panel
  In order to delete the panel, delete first all of the objects of its panel. And the panel will be removed automatically.

Background settings
Setting pictures and photos, saved on the device, as a background for home screen.

1. Press and hold empty space on the home screen and then press Wallpapers.
2. Swipe left or right and chose one of the proposed pictures, showed down the screen. To choose the photo, made by the camera, or other images press Choose image.
3. Choose the necessary image, change the frame (as you wish) and install as a wallpaper.

Widgets usage
Widgets – are the short programs, because of them a lot of small functions places on the home screen. In order to use them, add widgets to the home screen.
Attention! Some widgets are connected to network. The usage of web-widget may lead to additional costs.
The widgets availability depends on country or mobile operator.
On the home screen press and hold empty space and then press Widgets.
Scroll left and right on the widget panel and then touch and hold widget to add it to the home screen. Place it on the proper place, change size by dragging (if you wish) and then touch any part of screen to save the widget location.

Apps screen
On the Home screen, swipe up to open the Apps screen. The application screen contains all the applications installed in the phone. To open the selected application, tap it on the applications screen. Touch and hold the app icon to see more options. In the Home settings, you can select the desktop view option without the application screen (No-drawer mode). In this case, all installed applications will be placed directly on the main screen.

Account settings
You need Google Account to use Google programs such as Google Play, Gmail and ext. Create Google Account for using all phone possibilities.

Adding Accounts
To set up Google Account follow the instructions, which are displayed when the Google is opened without signing in.
To enter the system by the Google Account or register Google Account touches the program menu – SettingsAccounts →Add Account→ Google. It is possible to use a few Google Accounts.

Removing Accounts
On the program menu press Settings →Accounts, choose the Account that should be removed then press key Remove Account.

Files transferring
Transferring of the audio, video, images and other file types from the device to computer and reversely.
Connection in file transfer mode

1. Connect the device to the computer using the USB cable.
2. Open the notifications panel, and then tap Use USB to → Transfer files.
3. Transfer files between your device and the computer.

Connection in photo transfer mode

1. Connect the device to the computer using the USB cable.
2. Open the notifications panel, and then tap Use USB to → Transfer photos (PTP).
3. Transfer photos between your device and the computer.

Device securing

Prevent others from using or accessing personal data and information stored in the device by using the security features. The device requires an unlock code whenever unlocking it.

Setting a pattern
On the Applications screen, tap Settings → Security→ Screen

Lock→ Pattern.
Draw a pattern by connecting four dots or more, and then draw the pattern again to verify it.
Set a backup unlock PIN to unlock the screen when you forget the pattern. Setting a PIN
On the Applications screen, tap Settings → Security → Screen Lock → PIN.
Enter at least four numbers, and then enter the password again to verify it. Setting a password
On the Applications screen, tap Settings → Security → Screen Lock → Password. Enter at least four characters including numbers and symbols, and then enter the password again to verify it.

Setting a face unlock
This tablet has the ability to configure protection with face recognition. To activate the function, you must first set a key or PIN code to unlock. Then go to Settings → Security → Face Unlock to scan a face or manage already saved ones. After setting up the function to unlock the tablet, it is enough to hold the tablet in front of the face that was previously set after turning it on. Keep in mind that face recognition is less secure than a key, PIN, or password

SETTINGS

Use this application to configure the device, set application options, and add Accounts.
Tap Settings on the Applications screen.

Network & Internet

WI-FI
In the WI-FI section you will see a WI-FI switch, a list of available networks, the latest line of which is “Add Network” – for manually adding the WI-FI network and a Saved network – list of network has been saved. For settings press WiFi preferences:

• Turn on Wi-Fi automatically switch
• Open network notification switch
• Install certificates
• Network rating provider
• WI-FI Direct – searching and connection to devices that support this technology
• MAC-address and IP-address

After all installation is done, icon of connection with the wireless network appears at the top of the screen

Mobile network

• Mobile data
  Access data using mobile network switch Data roaming
  Set the device to use data connections when  you are roaming

• App data usage
  View mobile internet traffic usage statistics

• Data warnings & limit
  To set data limit and data warnings

• Preferred network type
  To choose which type of network you want to connect: 2G/3G/4G Network operator selection
  Manual / automatic network operator selection

• Access point names
  Set up access point names (APNs).

Data saver
Data saver prevents some apps from sending or receiving data an the background

Hotspot & tethering
USB tethering: Use USB tethering to share the device’s mobile network connection with a computer via USB. When connected to a computer, the device is used as a wireless modem for the computer.
Bluetooth tethering: Use Bluetooth tethering to share the device’s mobile network connection with computers or other devices via Bluetooth.
WiFi hotspot: Use the portable Mobile hotspot to share the device’s mobile network connection with computers or other devices through the Wi-Fi network.

VPN
Set up and connect to virtual private networks (VPNs).

Airplane mode
This disables all wireless functions on your device. You can use only non- network services.
Connected devices

USB
USB usage type selection (when connected to a PC):

• File transfer
• USB tethering
• Use the device as MIDI
• Transfer photos (PTP mode)
• No data transfer (charging only)

Pair new device
Find and pair a new Bluetooth device

Previously connected devices
List of Bluetooth devices that have already been connected to the smartphone

Connection preferences

• Bluetooth
  Enable / disable and configure Bluetooth to exchange data or media files with other Bluetooth-enabled devices.

• Cast
  Screencast to wireless device (such as Smart TV)

• Printing
  Connect to a printer and set up
  Files received via Bluetooth
  List of files received via Bluetooth

• Nearby Share
  Enable / disable Nearby Share function

Apps & notifications
List of applications installed on the device.
To view all installed apps, touch See all apps. Touch the app you want to view and adjust your actions:

• Open apps
• Uninstall – remove the application
• Force Stop – stop the application
• Notifications – Notification settings for the application
• Permissions – View and configure the permissions of the application
• Storage & cache (use the device memory application)
• Mobile data & Wi-Fi Data usage
• Battery. Battery usage data, background settings and battery optimization.
• Open by default (using this particular application to open specific links)
• Information about the application

WARNING! Standard apps provided with the device can not be deleted. Downloaded applications and some standard applications that come with your device can not be turned off. If you use this feature, the programs turned off do not appear on the application screen, but are still stored in the device memory.

Notifications
Application setting to show notification. For each application, you can enable / disable and configure display and send notifications in different situations with the use of a smartphone.

Screen time
Device usage statistics, timer settings for applications

Default apps
Set up default applications that will be used in certain situations.

Permission manager
View application permissions. Permissions are grouped by type of use. There is the ability to manage permissions: enable / disable

Special app Access
Installing default apps to use in certain situations. Configuring Special app Access to System Processes (battery optimization, modify system settings and so on).

Battery

In this menu you can see the battery usage after the last full charge, enable / disable power saving mode, set sleep mode, enable battery percentage display, and more.

Display

Display settings:

• Brightness level
• Dark theme switch
• Night light switch
• Wallpaper
• Time for activating sleep mode (screen timeout)
• Font size
• Display size
• Screen saver
• Lock screen settings
• Screen Rotation (auto-rotation switch)

System navigation
Select and configure navigation in your phone:
Gesture navigation. The bar with the navigation keys at the bottom of the screen will not be available.
Three-button navigation. It is possible to adjust the location of the navigation bar buttons.

Sound
Set up your phone’s sound: ringtones and volume for different types of notifications, vibrate on / off, key sounds, Do not disturb, sound enhancement, and more.

Storage
The memory displaying installed in the device: total amount and free space Privacy

Permission manager
View application permissions. Permissions are grouped by type of use. It is possible to control permissions: on / off

Show Passwords
Enable / disable the short-term password display function as you enter it

Notifications on lock screen
Choose how to display notifications on the lock screen

Autofill service from Google
View and manage one-touch data: passwords, addresses, credit cards, and other information stored in your Google Account.

Google location history
View and manage data about where you go with your device

Activity control
Choose the activities and info you allow Google to save

Ads
Advertising ID and personalization

Usage & diagnostics
Switch. Help improve the quality of Android by automatically sending diagnostic, device, and app usage data to Google.

Location
The setting changing is for applying to the location information.

• Use location. Switch
• Recent location requests: viewing programs that use information about location and its battery usage.
• App permission
• Emergence Location Service Switch
• Google Location Accuracy Switch
• Google Location History.

Security

Security status

• Turn Google Play Protect on / off and report on it
• Turn on and set up the “Find My device” feature

Device security
There is a changing of security settings of device and SIM- or USIM-card.

• Screen lock. Setting the screen lock method
• Face unlock. Set up face unlock
• Smart Lock. You need to set the screen lock to turn on. With Google Smart Lock you can easily protect your devices and Accounts. Smart Lock automatically blocks the tablet or phone when it’s not with you and unlocks the device when it’s safe. You can choose how to unlock your Android device: through certain Bluetooth or NFC connections, in trusted locations when you hold it, or when it recognizes your voice

Other settings for device security

• Device admin apps: view device administrators, installed on it. Administrators may be allowed to use on the device new policy.
• To encrypt device: set a password to encrypt data stored on the device. Password must be entered each time when activate the device. Charge the battery before activate this option, as data encryption takes time more than an hour.
• External memory card encryption: files encryption on the device, saved on memory card. If you reset your device to the factory defaults with this setting enabled, the device will not be able to read your encrypted files. Disable this setting before resetting the device.
• Data protection. To protect data from unwanted access using a graphic key
• Setting of SIM-card locking:
  • To lock SIM-card: enable or disable the lock option with the help of PIN-code to request PIN-code before using the device.
  • To change the PIN-code of the SIM-card: PIN-code changing that is used for the access on the SIM-card.
• Type of storage: set up the type of storage for Account data saving.
• Trusted Account data: certificate and Account data usage to ensure secure use of various applications.
• Certificates installation: to install encrypted certificates stored on USB-drives. Remove Account data: remove Account data from the device and reset the password.

Accounts
Manage (add, edit, etc.) Accounts of the device. Enable / disable automatic data synchronization. Adding and viewing information for emergencies for the user (medical information, contact persons in case of an emergency)

Accessibility
Availability services – special functions, designed for users with certain disabilities. Use the settings and change it to improve the availability and usability of the device

Digital wellbeing and parental control
A system application that allows you to get information about the use of the device, such as how often the phone is unlocked, or how long each application runs. Setting the lock for sleep time, setting timers for applications (at the end of the timer for the application, the application will be suspended until the end of the day). Parental control settings.

Google
You can search by voice or input some words through this function which is provided by Google.

DuraSpeed
Helps boost foreground APP speed by restricting background Apps. Works only when there is a foreground APP.

Accelerates APP launch time.
Provides continual optimized high speed experience from system level.
Saves more power while boosting the APP speed.

System

Language and input
Change the settings for text input. Some options may not be available depending on the selected language.

Language
Language selection will be displayed on the all menus and programs.
Keyboard and input methods

Google keyboard
Number of available options depends on country and operator

• Languages: to choose input language
• Parameters: various keyboard settings
• Text corrections: text checking and correcting according to existing dictionaries.
• Gesture typing
• Dictionary
• Additional settings

Google voice typing
Setting up voice typing without using the keyboard.
Languages: language list for texting.

• To block offensive words: prohibition against recognizing by the device abusive words entered by voice data.  Offline speech recognition: downloading and installation of the voice data for voice input offline.

Gestures settings

• Enable the quick open flashlight method
• Three fingers screenshot on/off switch

Date and time
Access and alter the following settings to control how the device displays the time and date.
If the battery remains fully discharged or removed from the device, the time and date is reset.

• Automatic date and time: Automatically update the time and date when moving across time zones.
• Automatic time zone: Set the device to receive time zone information from the network when you move across time zones.
• Set date: Set the current date manually.
• Set time: Set the current time manually.
• Use 24-hour format: Display time in 24-hour format.

Backup

• Back up to Google Drive. Switch
• Backup Account: Set up and edit a backup Google Account.
• Backup now: tap for backing up your data

Reset options
Reset device settings

•  Reset WiFi, mobile & Bluetooth:
• Reset app preferences
• Erase all data (Factory reset): Reset settings to factory default values and delete all data.

About tablet
Various device information, installed software, their versions, emergency information and ext.

CONNECTION

Phone
Use this program for making class or answering on them.
Touch Phone on the screen.

Making a call

• To make a call you may use one of the following ways:
• PHONE: enter the number by the keyboard, and then tap
• To open or close the keyboard tap
• Speed Dial tap  : to make a call from favorite contacts.
•  CONTACTS tap : to make a call from contacts.
• To view calls history tap

Speed dial numbers
To make a call of speed dial numbers tap the proper number.

Contacts searching
Enter the name, contacts number or email to find a proper number in the list. The forecasted contacts are displayed, while entering symbols. Choose one of them.
Touch to choose additional commands:

• Call history
• Settings:
  • Display options: Parameters for displaying numbers, sorting contacts
  • Sounds and vibration: setting the ringtone by default, turning on the vibration, turning on the sounds of pressing on the numeric keypad
  • Quick responses
  • Calling Accounts: set call rule when calling – use the default SIM card or on request
  • Blocked numbers: a list of phone numbers, calls and messages that will be blocked
  • Voicemail

Receiving calls

Calls respond
When a call comes in, swipe up to answer and swipe down to reject a call. When the waiting mode is on, it is possible to answer

another receiving call. Tap for rejecting with SMS
If you answer on the second call, the first one is placed on standby mode.

Missed calls
When you receive notifications about missed calls, indicator icons appear on the . Open the  status bar status bar to view the missed calls list.

Available options during the call
The following features are supported:

• Hold a call. Tap to hold, tap again to resume a call.
• Speaker: on/off Speaker, tap
• To open and to close the keyboard, tap
• You may turn on the mute mode to subscriber not to hear you, tap
• To add a call.
• Tap to end the current call.

Contacts

Use this program to control contacts such as contacts numbers, e-mails and ext. Touch Contacts on the screen.

Contacts managing
Touch Contacts on the apps screen.

New contact
Tap to select where to save the contact and enter contact information. Having done the entering, tap Save to save changes. Contact editing
Choose contact for editing and then tap Contact removing
To remove the contact, tap and choose Delete. To set speed dial number
Touch contact, tap  , icon is changed to , the contact appears on the panel Speed dial. To remove the contact, tap this icon again.

Messaging
Send messages and view them during the conversation.

Sending
Attention! For sending messages in the roaming, it may be paid additional fee.

• Tap Messaging on the app screen.
• Tap to create new message.
• To add recipients, tap and enter the text.
• Tap to send message.

When you create message, tap for additional settings:

• Insert quick text
• Insert contact
• Add subject
• Discard

Viewing messages
Messages are grouped into message threads by contact.
Attention! For receiving messages in the roaming, it may be paid additional fee.
Tap Message on the screen.Choose the contact in the message list.
View the dialogue.

Messages settings
Touch the message on the program screen, tap , choose Settings. In this menu you may set:

• Default program for sending SMS
• SMS settings: delivery reports, SMS storage location, editing the quick test, editing of the SMS center sending, SMS inputting mode
• MMS Settings
• Notification settings
• General Settings

APPS

Google Play
Google Play is your entertainment unbound. It brings together all of the entertainment you love and helps you explore it in new ways, anytime, anywhere. We’ ve brought the magic of Google to music, movies, TV, books, magazines, apps and games, so you get more from your content every day. Tap on the app screen to open Google Play
Camera
Take photos and record videos using various modes and settings.
Basic shooting
You can take photos or record videos. View your photos and videos in Gallery. Tap Camera on the Apps screen.

Camera etiquette

• Do not take photos or record videos of other people without their permission.
• Do not take photos or record videos where legally prohibited.
• Do not take photos or record videos in places where you may violate other people’s privacy.

Taking photos or recording videos

• Choose the capturing type: Photo, Video etc
• Tap the image on the preview screen where the camera should focus.
• Spread two fingers apart on the screen to zoom in, and pinch to zoom out.
• Tap to take a photo or to take video.
• To change the focus while recording a video, tap where you want to focus.
• Tap to go to the settings
  

Attention! Camera is turned off automatically, when it is not used. Make sure that the lens is clean. Otherwise, the device may not work properly in some modes that use a high resolution. The front camera features a wide-angle lens. Minor distortion may occur in wide-angle photos and does not indicate device performance problems.
To view photos and videos:

• Tap Preview.
• On the video draft the sign is displayed . To play the video, tap it.
• To hide or display the menu touch the screen.
• To select additional options, tap .
• To send photo or video, tap .
• To remove photos or videos, tap

Google apps

Chrome
Fast, easy and secure browsing with Google Chrome.

Gmail
You use the Email application to read and send email. There are many email address to choose.
Touch email icon to access it. If the Email Account has not been set up, you can set up an Email Account in a few steps.

Google Maps
Explore and navigate your world with Google Maps. Find places you’ll love, connect with businesses you’re interested in, and get around with real-time traffic information.

Google Play Music
Your mood. Your activities. Your tastes. Music that gets you.

Google Play Movies
The newest releases plus all your favorites, on any screen.

Google Drive
All your files within reach from any smartphone, tablet or computer. Anytime.

YouTube
See what the world is watching on YouTube.

Google Photos
Google Photos is the home for all your memories to help you find and relive all the moments that matter.

Hangouts
Hangouts brings one-on-one and group conversations to life with free messaging, plus videos and voice calls from any device.

Google Settings
Setting some apps that Google provided.

TROUBLESHOOTING

Before contacting a Sigma Mobile Service Centre, please attempt the following solutions. Some situations may not apply to your device.
When you turn on your device or while you are using the device, it prompts you to enter one of the following codes:

• Password: When the device lock feature is enabled, you must enter the password you set for the device.
• PIN: When using the device for the first time or when the PIN requirement is enabled, you must enter the PIN supplied with the SIM or USIM card. You can disable this feature by using the Lock SIM card menu.
• PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly several times. You must enter the PUK supplied by your service provider.
• PIN2: When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the SIM or USIM card. For more information, contact your service provider.
• Your device displays network or service error messages
• When you are in areas with weak signals or poor reception, you may lose reception. Move to another area and try again. While moving, error messages may appear repeatedly.
• You cannot access some options without a subscription. For more information, contact your service provider.

Your device does not turn on
When the battery is completely discharged, your device will not turn on. Fully charge the battery before turning on the device.
The touchscreen responds slowly or improperly

• If you attach a screen protector or optional accessories to the touchscreen, the touchscreen may not function properly.
• If you are wearing gloves, if your hands are not clean while touching the touchscreen, or if you tap the screen with sharp objects or your fingertips, the touchscreen may malfunction.
• The touchscreen may malfunction in humid conditions or when exposed to water.
• Restart your device to clear any temporary software bugs.
• If the touchscreen is scratched or damaged, visit a Sigma mobile Service Centre.

Your device does not react on pressing the keys or encounters a fatal error
Try the following solutions. If the problem is still not resolved, contact a Sigma mobile Service Centre.
Restarting the device
If your device does not react on pressing the keys or freezes you may need to close
apps or turn off the device and turn it on again.
Forcing restart
If your device is frozen and unresponsive, press and hold the Power key and the Volume Down key simultaneously for more than 7 seconds to restart it.

Resetting the device
I f the methods above do not solve your problem, perform a factory data reset. On the Apps screen, tap Settings → Backup and reset → Factory data reset → RESET DEVICE. Before performing the factory data reset, remember to make backup copies of all important data stored in the device.

Calls are not connected

• Ensure that you have accessed the right cellular network.
• Ensure that you have not set call barring for the phone number you are dialing.
• Ensure that you have not set call barring for the incoming phone number.

Sound echoes during a call
Adjust the volume by pressing the Volume key or move to another area.
A cellular network or the Internet is often disconnected or audio quality is poor

•  Ensure that you are not blocking the device’s internal antenna.
• When you are in areas with weak signals or poor reception, you may lose reception. You may have connectivity problems due to issues with the service provider’s base station. Move to another area and try again.
•  When using the device while moving, wireless network services may be disabled due to issues with the service provider’s network.

The battery icon is empty
Your battery is low. Charge the battery.
The battery does not charge properly (For Sigma mobile-approved chargers)

• Ensure that the charger is connected properly.
• Visit a Sigma Mobile Service Centre and have the battery replaced.

The battery depletes faster than when first purchased

• When you expose the device or the battery to very cold or very hot temperatures, the useful charge may be reduced.
• Battery consumption increases when you use messaging features or some apps, such as games or the Internet.
• The battery is consumable and the useful charge will get shorter over time.

Your device is hot to the touch
When you use apps that require more power or use apps on your device for an extended period of time, your device may feel hot to the touch.
This is normal and should not affect your device’s lifespan or performance.
If the device overheats or feels hot for a prolonged period, do not use it for a while. If the device continues to overheat, contact a Samsung Service Centre.
Error messages appear when launching the camera
Your device must have sufficient available memory and battery power to operate the camera app. If you receive error messages when launching the camera, try the following:

• Charge the battery.
• Free some memory by transferring files to a computer or deleting files from your device.
• Restart your device. If you still have troubles with the camera app, contact Sigma mobile service Centre.

Photo quality is poorer than the preview

• The quality of your photos may vary, depending on the surroundings and the photography techniques you use.
• If you take photos in dark areas, at night or indoors, image noise may occur or images may be out of focus.

Trademarks
Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide. • Wi- Fi®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi CERTIFIED™, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance

References

• Dictionary

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>