eco4life SC-RIPC-9C Indoor 2.4G WiFi Smart IP Camera User Manual
- June 3, 2024
- eco4life
Table of Contents
eco4life SC-RIPC-9C Indoor 2.4G WiFi Smart IP Camera
WHAT’S IN THE BOX
DESCRIPTION
INSTALL OPTIONALLY
- Stick the adhesive at the bottom of the camera
- Mount the camera on a clean, flat surface
FEATURES
-
VIDEO FLIP
Flip your video stream vertically -
MOTION DETECTION
Motion sensors will notify you when movement is detected -
RECORD
Record every moment using high capacity SD card storage
CONNECTING TO DEVICE
- The smart home device only supports 2.4Ghz frequency. If your router supports both the 2.4Ghz and 5Ghz frequency, the 5G network is usually labeled as “Router-5G” so please connect to the other one.
- Each smart home device can only be registered to one account but it can be shared with others by using the sharing function of the app.
- Download the free eco4|life app from the Apple App store or Google Play store
- Follow the on screen instructions to create account for eco4life
- Plug in the IP Camera into an outlet
- Press the “*” icon in the top right corner of the app
- Press the “IP Camera” icon from the list
- Follow the instructions in the app to connect the device
FAQs
Can I run IP cameras work without internet?
No, IP security cameras do not need an external Internet connection, despite the moniker “Internet Protocol.” A connection to your local area network is all that is necessary.
Can WiFi camera work without internet?
In spite of the fact that you won’t have access to all of their functions, wireless cameras can function without an internet connection. Obviously, the kind of camera, how it was set up, and how it stored video will determine whether or not it will function without an internet connection.
What is the maximum distance for IP camera?
Technically, the maximum length of network cable that standard POE IP security cameras can use to receive a signal is 300 feet of pure copper wire. However, since the type of wire being used cannot always be guaranteed to be 100% pure copper, it is always safer to estimate no more than 250 feet.
How does WiFi IP camera work?
Similar to a digital camera, IP cameras use the same techniques for image acquisition and file compression for network transmission. IP cameras can be utilized wirelessly over a Wi-Fi router or with a wired network linked via Ethernet cable to a broadband modem or router.
What is the disadvantage of IP camera?
IP cameras are more expensive than analogue cameras since they have a longer range of functionality. It can be expensive to switch from analogue to IP cameras, but it’s far simpler to scale up or down a system once it’s in place.
What is the range of a WiFi camera?
A wireless camera shouldn’t be placed too distant from the main hub or wireless router. A wireless camera’s range can go up to 500 feet or more if there is a direct line of sight. The range is typically 150 feet or less inside a house, but this isn’t always the case.
How far will wireless cameras work?
As long as the signal from the cameras to the central hub is unbroken and clear, wireless security camera systems function effectively. Wireless systems typically have a range of no more than 150 feet inside the home.
How much power does an IP camera require?
To meet their power needs, almost all IP cameras and NVRs ship with an AC/DC power adaptor. A typical IP camera consumes only 50 to 300 mA of power between 5 and 12 VDC, whereas an NVR uses about 3000 ma at 12 VDC.
How many watts is an IP camera?
When compared to CCTV/IP security cameras without these features, IP cameras with IR illumination, night vision, and pan-tilt will use about 2-4 watts more power.
What is the disadvantage of IP camera?
IP cameras are more expensive than analogue cameras since they have a longer range of functionality. It can be expensive to switch from analogue to IP cameras, but it’s far simpler to scale up or down a system once it’s in place.
Do IP cameras record continuously?
A lot of IP cameras use motion detection technology, frequently in place of continuous recording. The camera can only start recording when it senses motion thanks to motion detection.
Can I use IP camera without router?
Despite the fact that IP stands for Internet Protocol, an IP camera system can function just fine without an internet connection. Using just a monitor and mouse connected directly to the NVR, you can view the cameras, record to a hard drive, and search through recorded footage.
Why does my IP camera keep disconnecting?
When the bandwidth, firewall, or IP address settings are changed, or when the Internet connection is unreliable, Surveillance Station may lose contact with your camera.
How many wires does a IP camera need?
Any IP device, including IP cameras, must be connected to the network using a CAT 5 data cable, which has four pairs of wires. Each pair consists of a solid wire in the same colour as the background and a strip in the same colour on white paper.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>