eco4life SC-PF100 SmartHome WiFi Pet Feeder with Built-in Camera User Manual
- June 6, 2024
- eco4life
Table of Contents
SmartHome WiFi
Pet Feeder
with a built-in camera
Product Manual
Model: SC-PF100
Please read this manual carefully before use to ensure safe use of the SmartHome WiFi Pet Feeder.
Accessories
Product Introduction
Operation Guide
First Time Use
- Open the top cover of the feeder and remove the power cord adapter from the bucke
- Plug the power cord into the power connector and the rear of the main unit and connect the adapter to power.
- Place the main unit in a horizontal position and the food bowl is installed at the corresponding position of the main unit.
- Add pet dry food to the feeder bucket.
- The desiccant is placed in the desiccant box by default. Please replace it regularly for long-term use. (do not use cleaning)
- The battery compartment can be installed with (3) D batteries for manual feeding when there is no electricity (optional).
- Bind the feeder to the eco4life app to set up the feeding and planning of the pet.
Function Description
Feed Button: Short press to feed one portion. Long press for 5 seconds to
restore the factory settings.
Record Button: Press and hold the “Record Button” to record the sound to
remind the pet to eat before feeding.
Play Button: Plays the recorded sound.
Dry Battery Compartment: (3) D batteries can be installed for the power
supply.
Register APP
- Open the eco4life App.
- Click “Create a new account”.
- Select the country and enter the email. Click to get the verification code.
- Enter the received verification code for verification.
- Set up login password and login successfully.
Setup Pet Feeder with eco4life App
Open the eco4life app. Click “add device”, enter Wifi password and confirm, connecting till “device added successfully.”
Setup Pet Feeder with eco4life App
Cleaning / Maintenance
The food bowl and storage bin should be cleaned periodically with a mild cleaning agent to avoid bacteria build-up.
- The parts above can be removed from the main feeder and cleaned with a mild cleaning agent and water.
- The dessicant box in the upper cover is rotated counterclockwise to remove it.
- The food bin is removed by rotating the “Food Bin Separation Switch”.
- The bowl is removed by pulling it down.
- After cleaning, make sure all parts are completely dry before re-assembling.
*This feeder is compatible with dry food kibble smaller than 12mm. Do not use freeze-dried food.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>