SOUNDPEATS Air3 Pro Hybrid ANC Noise Cancelling Bluetooth User Guide

June 3, 2024
SoundPEATS

SOUNDPEATS Air3 Pro Hybrid ANC Noise Cancelling Bluetooth User Guide
SOUNDPEATS Air3 Pro Hybrid ANC Noise Cancelling
Bluetooth

Pairing

Pairing Instructions

  1. Open the charging case lid, both earbuds will power on automatically when the led indicator of charging case is solid green. Keep the case lid in open status, both earbuds will enter into pairing mode.
  2. Activate the Bluetooth on your device and choose “SOUNDPEATS Air3 Pro” to connect.

Reset

  1. Clear the pairing record between the earbuds and all your devices.
  2. Place back both earbuds in charging case, make sure the led indicator of the charging case ashes white light twice.
  3. With the case lid open, press and hold the charging case button for 10 seconds until the white and red light flashes twice alternately, reset complete.
  4. Close the case lid and reopen it to activate the earbuds.

Wearing

  1. Identify the left and right earbuds.
  2. Rotate earbuds to find the most comfortable angle.
    Wearing Instructions

Product Diagram

Product Diagram

Touch Control

Power On Open up the case lid
Power Off Place back into charging case and close the lid
Play / Pause Auto: Take off either earbud to pause music;Wear either

earbud or both together to play music.
Manually: Double tap the MFB
Volume –| Single tap the left MFB
Volume +| Single tap the right MFB
Next Track| Press and hold the right MFB for 1.5s
Answer / Hang Up Phone Call| Double tap the MFB
Reject Phone Call| Press and hold the MFB for 1.5s
Switch Between Call Devices| Take off both earbuds to transfer the call to the phone during a call;Wear either earbud to transfer the call to the earbuds
Manually Enter Pairing Mode| Press and hold the charging case button for 3s
Activate Voice Assistant| Triple tap the right MFB
Enter / Exit Game Mode| Triple tap the left MFB
Switch Between Active Noise Canceling Mode/ Transparency Mode/ Standard mode| Press and hold the left MFB for 1.5s

Q&A

Q1: What does the indicator on the charging case tell?
It shows the battery power left in the charging case.

Charging Case Indicator Battery Left
Green 100%-50%
Yellow 49%-10%
Red Below 10%

While charging the case, the indicator flashes slowly.

Charging Case Indicator Battery Level
Red 0 – 20%
Yellow 21% – 69%
Green 70% – 99%
Green LED stays on 100%

Q2: How to charge the charging case?

  1. Use a Type-C adapter to charge the case (current no more than 1A).
  2. Please charge the earbuds and charging case at least once per 3 months when not in use for a long time.

Q3: Why are the earbuds still connected to my phone after placing them back and closing the case lid?

  1. The charging case has no power left. The case can’t turn off the earbuds if it is out of battery.
  2. Make sure the earbuds are placed in the charging case correctly, and the contactors on the charging case and earbuds are clean. Please try to clean them with something like microfiber cloth.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

MANUFACTURER

Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com


Company:
Qing UG(haftungsbeschränkt)
Address: Undinestr. 7, 12203 Berlin Germany
Symbol

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals