ZEBRONICS ZEB Vibe Portable BT Speaker User Manual

ZEBRONICS ZEB Vibe Portable BT Speaker

Thank you for purchasing the ZEB-VIBE Portable Speaker. Please read the user manual carefully before usage & save it for future reference.

Note:

• Avoid the usage of this speaker at the high temperature and high humidity environment.
• Avoid the self-disassembly of the product as it results in the failure of Warranty.

Features

• Trolley speaker
• BT vS.0 / USB / mSD /FM/ AUX/ MIC Input x 2
• Karaoke function
• LED display
• LED lights
• Dual Full range 20.32cm Drive
• Remote control
• Wireless mic
• Built-in rechargeable battery
• TWS Function
• Volume, Treble, Bass, MIC Volume, Echo Control

Specifications

• Output power (RMS) : 60W (30W x 2)

Driver size

• Full range : 20.32cm x 2
• Tweeter : 2.54 cm

Impedance

• Full range :40
• Tweeter : 100
• Frequency response : 65Hz-18kHz
• S/N Ratio : ::::60dB

File format

• support (USB/mSD) : MP3, WAV, WMA
• Line input : 3.5mm

Max. supported

• Memory size : 32GB (USB/mSD)

• FM frequency range : 87.5 MHz-108 Mhz

• Charging time : Sh

• Playback time : 7.Sh*

• BT name : ZEB-VIBE

• BT version : 5.0

• Product dimension : 248 x 240 x 542 mm
  (W x D x H)

• Net. weight : 6.4 kg

Package Content

• Speaker : 1 U
• Remote : 1 U
• Wireless Mic : 1 U
• Power Cord : 1 U
• Input cable : 1 U
• QR Code Guide : 1 U

Control Panel Description

1. Input mode change Key(BT/USB/mSD/FM/AUX)
2. Previous Track/FM channel key
3. Play/Pause /TWS Connection key
4. NextTrack/FM channel key
5. Echo control
6. Short press this button one time, screen will display “b”,then turn the VOLUME knob to adjust the bass of unit. Short press this button two times, screen will display “t”, then turn the VOLUME knob to adjust the treble of unit.
7. AUXIN
8. USB port
9. mSD card port
10. Microphone input port 1 and port 2
11. Master volume control
12. Mic volume control
13. Light switch
14. Power ON/OFF switch
15. Charging indicator
16. Phone/tablet holder
17. LED display

Remote Control

1. Mute/ Un mute
2. Mode change key
3. Recording key
4. Play recorded file
5. Volume+
6. Volume-
7. NextTrack/ FM channel+ /Tune+
8. Previous Track/ FM channel -/Tune –
9. Play/ Pause key
10. Repeat key
11. EQ preset
12. Numeric selection (0-9)

General Instructions

BT Mode:
Switch the speaker to BT mode, Scan for nearby BT devices in your device. Tap on “ZEB­VIBE “to connect.

USB/mSD Mode:
Insert the USB Drive/mSD Card to the speaker. The speaker will detect the USB Drive/mSD Card and the audio files from drive will be played automatically.

FM Radio:
Switch the speaker to FM, In FM Mode, long Press the Play/Pause Key to scan the available FM channels. Once the scanning is done, The speaker will start playing the first scanned channel.

AUX-IN:
The speaker can be connected to an audio device using a 3.5mm cable. Connect the one end of the cable to the speaker & connect the other end of the cable to an audio source. The songs from the audio source can be heard through the speaker.

TWS Connectivity:
Turn on both ZEB-VIBE speakers in BT (wireless) mode. Connect one of two speakers (it says A) to the BT device (cell phone, tablet, computer, etc.) Long press the TWS button on the speaker (A) 3S, ZEB-VIBE A and B are ready for TWS playing. The TWS function will be activated and the pairing will be automatic the next time. (if A and B).

Recording Function:
To record a voice, first plug-in a USB/mSD card into the speaker which will act as a storage device. Press the REC. key on the remote to start/stop recording. Once the song or voice is recorded through the Mic, press the REC. PLAY key to play the recorded file.
Note: Speaker can record the Mic input.

Charging Indication:

• Charging Indication  : Red LED Flashing
• Full Charging Indication : Red LED Glows

ISO 9001:2015 Certified Company www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>