Power Banks A15 6000mAh 20W Magnetic Wireless Charging Power Bank User Manual
- June 3, 2024
- Power Banks
Table of Contents
A15 6000mAh 20W Magnetic Wireless Charging Power Bank
User Manual
Please read this user manual carefully before use and keep it properly
Product Parameter
Name: Magnetic Wireless Power bank Al5
Vodel No: Al5
Battery: Polymer Lithium Battery
Capacity : 6000mAh/3.85V (23.1Wh)
Rated Capacity. 3500mAh ( 5V 2.4A)
Energy conversion rate: 75%
Type-C Input: 5V-3A; 9V 2A
Type-C Output: 5V 3A; 9V 2.22A; 12V 1.67A
Wireless Charge output: 5W/7.5W/10W/15W(Vax)
Total Output: Type-c:5V-2A, Wireless charger 5V 1A
Transmission frequency : 110kHz 148kHz
Product Size 99.99×63.4×15.5mm
Product Weight: About 148g
Packing list
- Power Bank *
- User Vanual * 1
- Wa rra nty card *1
- Charging Cable *1
Product Diagram
Product description
This product is a portable charging device that can provide wired or wireless charging for mobile phones, tablets, e-books, game machines and other digital products. The product has the characteristics of two in one of wired charging and wireless charging, magnetic suction positioning, Type-C dual way fast charging, PD2OW INPUT/18W OUTPUT 15W wireless fast charging, etc. Product built-in F D, overcharge, over discharge, temperature protection and other safety protection circuit.
Use environment
Use ambient temperature: non-tropical area below 0°C to 35 °C
Icon description
The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
Operation description
The power button operation instructions
For viewing electric quantity:
Press the button once to initiate the power output function, when you can view
the remaining electric level of the power bank.
Operation for discharging by cable:
Connect the USB charging cable to the corresponding output port of the power
supply, and the power supply will automatically turn on the output. Due to
compatibility problems, some smart phones need to press the key to turn on the
power output function.
Operation of wireless charging:
Put your QI supported mobile phone on the central of this product, this
product will automatically turn on wireless charging modes and charge your
mobile phones. Due to compatibility problems, some smart phones need to press
the key to turn on wireless charging mode.
Operation of entering small current mode:
Long press the key to get into the small current mode, 4 LED lights shinning
like a streamline means you entered the small current mode. Small current mode
can charging for small current needed devices like: TWS, smart watches etc…
Operation of exiting small current mode:
Long press the key, when all led light extinguished, it means you exited the
small current mode.
Wireless charging tips
The wireless charging mobile phone should be placed in the wireless charging area of the product (the transmitting area of the wireless charging coil is illustrated in the figure) for wireless charging. The wireless charging distance is within 4 mm. If the distance exceeds 4 mm, the wireless charging can not be carried out. Please adjust the wireless charging distance within the wireless charging range.
Safety warning instructions Tips
- The charging contact surface on the back of the mobile phone should not be covered with metal materials, such as iron sheet, ring, metal protective case, etc.
- When the mobile phone is charging, if intermittent charging or serious heating is found, it may be that the receiving coil of the mobile phone is not completely aligned with the wireless charging coil, or there is metal foreign matter in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective sleeve, and then align it in the correct position.
- Please do not disassemble the machine by yourself. Improper use or improper placement of the product by the user may reduce the service life or damage the product. Therefore, the responsibility does not belong to the warranty responsibility or the manufacturer’s responsibility. Please understand.
- Mobile power has conversion efficiency, so the battery capacity of mobile power is not equal to the rechargeable capacity.
- Please charge your power regularly (at least every 5 months is recommended) to maintain its long service life.
- In case of any personal and property damage caused by consumers’ improper use or warning in violation of the product instructions, the company will bear all consequences, and the company will not bear any legal liability.
- Avoid using electrical appliances or loads that exceed the output current of the product (the circuit will be protected, no output).
- Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.
Statement on Toxic and Hazardous Substances in Electronic Information Products:
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard. The
product complies with EU ROHS 2.0 directive (2011 / 65 / EU)
changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
‘ This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recyclin electronic and electrical equipment.
Made In China
Warning
lease follow the above safety instructions otherwise it will cause fire,
electric shock,damage or other damage.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference. (2)This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>