Power Banks K018-CCWA 123W Dual PD Multi-Function Travel Mobile Power Supply User Guide

June 6, 2024
Power Banks

Power Banks K018-CCWA 123W Dual PD Multi-Function Travel Mobile Power Supply User Guide
Power Banks K018-CCWA 123W Dual PD Multi-Function Travel Mobile Power
Supply

Product outlook

Learn the features of port & key before using

  • On: Press the power key, LED shows power volumn
  • Off: Press the power button 3 seconds, shuts all output
  • Low Current Mode: Press side button twice, “%”is twinkle

Product outlook

  1. USB Cl port
  2. USB C2 port
  3. USB-A port
  4. Power button
  5. Volume indicator
  6. Wireless charge

Product Parameter

Model: K018-CCWA
Battery: Li-ion battery
Capacity: 20000mAh 3.6V(72Wh)
Product size: 152X82X27MM
Net Weight: 410g
Input:
USB-C1: PD100W
DC 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A (Max)

Output of each port:

  •  USB-C1 : PD100W
    DC 5V 3A. 9V 3A, 12V 3A, 15V. 3A, 20V. 5A (Max)

  • USB-C2 : PD45W
    DC 5V 3A, 9V 3A, 12V 3A, 15V 3A. 20V 2.25A (Max)

  • USB-A: DC 5V/3A, 9V/2A, 12V 1.5A

  • Wireless TX output : 10W

  • Multi-port simultaneous output : 123W(Max)
    C1:65W-C2:30W+A:18W+TX:10W

Instructions

  • A:Charging Mode
    Input: USB-C1: PD100W
    DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (Max) Support Charging & Discharging synchronous, Output During charging58W:

    1. USB-C2 : PD3OW DC 5V/3A, 9V/2A, 12V/2A, 15V/2A, 20V/1.5A (Max)
    2. USB-A: DC 5V/3A, 9V/2A, 12V/1.5A
    3. Wireless TX output : 10W
  • B:Charging Mode Output of each Port:

    1. USB-C1 : PD100W DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (Max)
    2. USB-C2 : PD45W DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A (Max)
    3. USB-A : DC 5V/3A, 9V/2A, 12V/1.5A 4. Wireless TX output : 10W
      Multiple synchronous total output : 123W C1:65W+C2:30W+A:18W+TX:10W
  • C:Product Working Condition

    1. The power volume shows from 0% to 100%; shows to be charged or fully charged.
    2. Under fast charging mode, the indicator flash White Light fi.
    3. Charging from C1, C2, A port is automatic mode, no need pressing the power button; Press power button to start wireless charging mode
    4. Product with high temperature protection function by reducing the power, total power reduces from 123W to 87W while the temperature of mainboard detected exceeding 85 degree. The power recovers to 123W while the temperature is below 65 degree.

Warnings

  • Do not place charger into water or clean with wet cloth !
  • Keep charger safe distance from fire, Inflammable and explosive liquid & gas!
  • Do not drop, hit and shake violently!
  • Use it under -10 upto 45 degree centigrate temperature condition, both high temp.& low temp. affect the charger!
  • Do not burn the battery!
  • Avoid long time using under low temp. condition!
  • Avoid exposing to sunlight, humid & rainning weather!
  • Charge or discharge it at least one time in a month if Infrequently used !
  • Select suitable power charger or adaptor, stop using by any sign of Battery corrosion or deformation!
  • Improper use might harm the product or user!
  • Keep safe distance from Child !

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals