ZEBRONICS Zeb Trump 5.1 Home Theater Speaker User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS Zeb Trump 5.1 Home Theater Speaker User Manual
Introduction
Thank you for purchasing the ZEB-TRUMP 5.1 Speaker. Please read the user manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
Features
- 5.1 Channel speaker
- Wireless BT/USB/SD/FM/AUX/AC-3/Optical
- LED display
- 16.51cm subwoofer
- Multicolor LED Lights
- Remote control
Specifications
Output power (RMS)
-
Subwoofer: 35W
-
Satellite: 9W x 5
-
Total: 80W
Driver size -
Subwoofer: 16.51 cm x 1
-
Satellite: 7.62 cm x 5
Impedance -
Subwoofer: 60
-
Satellite: 40
-
Frequency response: 50Hz – 18kHz
-
S/N Ratio: 72dB
-
Separation: 38dB
-
File format support (USB/mSD): MP3 / WAV / WMA
-
Line input: 2ch RCA, AC-3, OPTICAL
-
Max. supported memory size: 32GB (USB/SD)
-
FM frequency range: 87.5 MHz-108 MHz
-
BT name: ZEB-TRUMP
-
BT version: 5.0
-
Product dimension: (W x D x H)
-
Subwoofer: 235 x 350 x 360 mm
-
Satellite Front: 95 x 93 x 328 mm
-
Satellite Rear: 95 x 93 x 328 mm
-
Satellite Centre (with base): 300 x 93 x 125 mm
Net. weight: -
Subwoofer: 5.94 kg
-
Satellite: 406g x 5 (with base)
-
Total: 7.97 kg
Package Content
- Subwoofer: 1U
- Satellite : 5U
- Remote: 1U
- Input Cable: 1U
- QR Code Guide: 1U
- FM Cable Base: 5U
- Optical cable: 1U
Control Panel Description
Back Panel Description
Remote Control
- Power: Standby On/OFF
- Numeric Pad (0-9): To select direct tracks from USEI/SO and to select two digits a nd above, by consecutively pressing
- Volt+: To increase the volume
- Prev: To select the previous songs in BT/USB/SD or channels In FM mode
- Vol-: To decrease the volume
- REP: To Switch between REP ALL tracks or REP 1 track
- Mode: Mode Selection(BT/AUX/USB/SD/FM)
- EQ: Equalizer
- Play/Pause: To Play/Pause for current song
- Next: To select the next songs In BT/USB/SD or channels In FM mode
- Bass +: To increase the bass
- Bass -: To decrease the bass
- Treble+: To increase the treble
- Treble-: To decrease the treble
- Mute: To Mute/ Unmute for currently playing song
- LED M: LED turn light five modes
- Front Vol: Front volume increase and decrease
- SW: Subwoofer volume increase and decrease
- CEN: Center volume increase and decrease
- SL: Surround left channel volume Increase and decrease
- SR: Surround right channel volume increase and decrease
General Instructions
BT Mode:
Switch the speaker to BT mode. Scan for nearby BT devices in your device. Tap
on “ZEB-TRUMP” to connect.
USB/SD Mode:
Insert the USB/SO flash drive to the speaker. The speaker will detect the
USB/SD and the audio files from flash drive will be played automatically.
(This mode isn’t selectable on the speaker or remote control unless a USB/SD
flash drive is connected). Ensure that your USB/SD flash drive contains
MP3/WAV/WMA files (other file types not supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, press &hold the “Play / Pause”
button in the remote to scan for the available FM channels. Once the scanning
is done, the scanned channels will begin to play. The next button or previous
button in the remote can be used to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source.
The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company www.zebronics.com
