ZEBRONICS ZEB-ENERGY 2.1 Multimedia Speaker User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-ENERGY 2.1 Multimedia Speaker
Thank you for purchasing the ZEB-ENERGY 2.1 Speaker. Please read the user
manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
Features
- 2.1 Channel Speaker
- Wireless BT/USB/SD/FM/AUX
- LED Display
- RGB Lights
- 20.32 cm subwoofer
- Remote control
Specifications
- Output power (RMS)
- Subwoofer: 60W
- Satellite: 20Wx 2
- Total : 100W
- Driver size
- Subwoofer: 20.32 cm x 1
- Satellite : 7.62 cm x 2
- Impedance
- Subwoofer: 60
- Satellite :40
- Frequency response: 50Hz-18kHz
- S/N Ratio :75dB
- Separation :38dB
- File format
- support (USB/mSD) : MP3
- Line input : 2ch RCA
- memory size : 32GB (USB/SD)
- FM frequency range: 87.5 MHz-108 MHz
- BT name: ZEB-ENERGY
- BT Range : 10 Meters (Without Obstacles)
- BT version : 5.0
- Product dimension (W x D x H)
- Subwoofer : 250 x 375 x 380 mm
- Satellite: 100 x 11 O x 370 mm
- Net. weight
- Subwoofer: 6.15 kg
- Satellite: 775 g X 2
- Total: 7.7 kg
Package Content
- Subwoofer :1 U
- Satellite :2 U
- Remote : 1 U
- Input Cable: 1 U
- QR Code Guide: 1 U
- FM cable: 1 U
Control Panel Description
Back Panel Description
Remote Control
- Power: Standby ON/OFF
- Numeric Pad (0-9) : To select direct tracks from USB/mSD and to select two digits and above, by consecutively pressing
- Vol+: To increase the volume
- Prev : To select the previous songs in BT/USB/mSD or channels in FM mode
- Vol-: To decrease the volume
- RPT: To Switch between REP ALLtracks or REP 1 track Mode: Mode Selection(BT/ AUX/USB/mSD/FM)
- EQ: Equalizer
- Play/Pause : To Play I Pause for current song & FM Scan (Press & Hold)
- Next: To select the next songs in BT/USB/mSD or channels in FM mode
- Bass +: To increase the bass
- Bass-: To decrease the bass
- Treble +: To increase the treble
- Treble -: To decrease the treble
- Mute : To Mute/ Unmutefor currently playing song
General Instructions
BT Mode:
Switch the speaker to BT mode, Scan for nearby BT devices in your device. Tap
on “ZEBENERGY”to connect.
USB/SD Mode:
Insert the USB/SD flash drive to the speaker. The speaker will detect the
USB/SD and the audio files from flash drive will be played automatically.
(This mode isn’t selectable on the speaker or remote control unless a USB/SD
flash drive is connected).
Ensure that your USB/SD flash drive contains MP3/WAV/WMA files (other file
types not supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, press &hold the “Play/ Pause”
button in the remote to scan for the available FM channels. Once the scanning
is done, the scanned channels will begin to play. The next button or previous
button in the remote can be used to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source.The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company www.zebronics.com