martor Secunorm 185 Robust Safety Knife Instructions
- June 3, 2024
- martor
Table of Contents
martor Secunorm 185 Robust Safety Knife
Overview
USAGE
- Use the slider to engage the blade for cutting.
- Pierce into the cutting material to cut.
- Always remove your thumb from the slider to ensure automatic blade retraction.
- For best results, cut plastic strapping band diagonally (at a 45° angle).
BLADE CHANGE
- Press the blade change button downwards and at the same time pull out the slider all the way from the front.
- Open up the blade cover.
- Reverse or replace the blade. Make sure you position the blade exactly over the location lobes. Close the cover.
- Finally, re-insert the slider and blade fully into the handle.
PROTECTION OF USER
Following cutting, the blade immediately re-tracts into the handle. Condition: you have released hold of the slider.
PROTECTION OF GOODS
An appropriately small cutting depth serves to protect your goods.
DISPOSAL
- Your SAFEBOX is the best place to store used blades.
- When the SAFEBOX is full, empty all contents into your USED BLADE CONTAINER.
Please note: To ensure your product always functions flawlessly, regularly remove any impurities. For additional safety, we recommend wearing gloves.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>