martor Secubase 383 with Serrated Blade Instruction Manual
- June 10, 2024
- martor
Table of Contents
martor Secubase 383 with Serrated Blade Instruction Manual
SECUBASE 383
USAGE
Move the slider foward to the required blade extension.
Pierce and remove thumb from slider. The blade retracts when cutting is
complete. Always cut away from the body
You also have the option of moving the slider forwards to the required cutting
depth and ocking it in position. Then press the safety lock into the required
recess. To unlock, move
in the opposite direction.
For safe storage, lock the slider in position 0.
Also move the safety lock upwards in the direction of the arrow.
BLADE CHANGE
Only possible when unlocked. That means:
Don’t push the safety device upwards.
Pull the blade change button to the back as marked by the arrow (a), flip the
end of the handle downwards (b) and move the blade out of the handle by using
the slider.
Lift the slider, take out and change the blade, then position the new blade
exactly on the cam. For left hand use, turn blade over. The
two magnets fix the blade additionally.
At last, slide the inner part with the blade back into the handle and flip the
end of the handle upwards. Release and snap back the
blade to ensure flawless functionality.
PROTECTION OF USER
Following cutting, the blade immediately retracts into the handle. CAUTION:
This requires that your hand is not blocking the slider and
the slider is not locked.
DISPOSAL
Your USED BLADE CONTAINER is the best place to store used blades.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>