Smarthome SELECT 5.0-Channel Speaker Kit-Rimless In-Ceiling Speakers User Guide

: June 4, 2024
: Smarthome

Table of Contents

Smarthome

Smarthome

Smarthome SELECT 5.0-Channel Speaker Kit-Rimless In-Ceiling Speakers

Smarthome-SELECT-5.0-Channel-Speaker-Kit-Rimless-In-Ceiling-
Speakers

Specifications

BRAND: Smarthome SELECT
SPEAKER TYPE: Surround Sound
RECOMMENDED USES FOR PRODUCT: Home Theater
MOUNTING TYPE: Ceiling Mount
SURROUND SOUND CHANNEL CONFIGURATION: 5.0
ITEM WEIGHT: ‎ 9.08 pounds
PRODUCT DIMENSIONS: ‎4 x 4 x 6 inches
STYLE: ‎Rimless
ITEM PACKAGE QUANTITY: ‎1

Introduction

It provides optimum speaker quality and surrounds sound bundle at a reasonable cost. It consists of five in-ceiling (rimless grille) directional speakers for the front left, right, center, and rear Smarthome SELECT A/V channels.

HOW CELLING SPEAKERS WORK WITH TV

You can enjoy TV sound through your ceiling speaker system by connecting an analogue cable from your TV to the amplifier, plugging it in, and setting your TV to line output.

HOW TO CONNECT TO RECEIVER

Disconnect everything.
Obtain your cables.
The wires’ ends should be cut.
Look at the speakers’ recommended wiring to see how it should be done.
Obtain your cables, and then attach them to the appropriate sockets.
Attach the sockets’ cables with locks.

HOW TO CONNECT TO AMP

For the wires, drill a hole.
Make sure the amplifier is unplugged and turn off your breaker.
Put the wires in.
Start attaching the wires to the ceiling speakers’ terminals.
Take the opposite side of the wires and attach it to the amplifier’s terminals.
Try it by turning on your breaker.

HOW TO POWER

The majority of the time, ceiling speakers are passive, which means they don’t have internal amplifiers and instead get their power from speaker cables that are connected to an external amplifier. Each ceiling speaker is connected to the binding posts on the amplifier to do this.

HOW TO INSTALL

Take the speaker’s grill off. To reveal the copper strands, remove the wires from the ceiling and strip each of the two conductors by about half an inch. Reinstall the speaker in the ceiling after attaching the speaker’s cables. Utilizing the screws located around the speaker’s perimeter, secure the speakers in place.

HOW TO CONNECT TO PROJECTOR

Make sure your projector has an HDMI input and a line output for your streaming device, which is typically an Amazon Fire stick. All you need to do to enjoy your music through the ceiling speakers is run an audio cable between the projector and the amplifier.

Frequently Asked Questions

What are the benefits of ceiling speakers?

Similar to being at a concert hall or live music event, they have the power to immerse you in a surround sound experience. If you want to recreate the theatre experience at home, in-ceiling speakers are a fantastic addition to any living room TV design.

Do Bluetooth ceiling speakers require an electrical outlet?

They are typically passive speakers mounted on walls or ceilings. As a result, they are not need to be plugged into an outlet. They can both be utilized as sources of power and sound by being directly connected to an amplifier or receiver.

What power output do I require for ceiling speakers?

All other things being equal, you will require more electricity to fill a larger room. You need a stereo with at least 25 watts per channel with effective speakers or 40 watts per channel with non-efficient speakers for a space that is 18 feet by 18 feet and has 9-foot ceilings.

Do my ceiling speakers need a subwoofer?

Even if ceiling speakers are capable of producing all the bass and low-end frequencies, a subwoofer will be helpful in handling them. Additionally, it significantly improves the overall sound quality of your sound system.

Do ceiling speakers require a receiver?

It is necessary to connect passive in-ceiling speakers to a receiver or amplifier. Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that can also serve as a power supply.

Exactly how is speaker coverage determined?

A speaker can cover a wider area of the floor when mounted at a higher height. Example: In an office with a 2.5 m (8 ft) ceiling height, one speaker can fill a space with a 7.5 m diameter (3 x 2.5 m), or 44 m2 (3.14 x (7.5/2)2).

How many speakers for the ceiling do I need?

As a general rule, we advise using one pair of ceiling speakers in rooms that are larger than 3 × 3 meters, and two pairs in places that are larger than 5 x 5 meters will provide a more balanced sound.

Why won’t the speakers in my ceiling work?

The audio source, the wiring, or the speakers themselves may be the issue. To test if the source is the issue, you could switch the connections at the source. For example, unplug a connection from a speaker that is working and attach it to the problematic speaker.

How can you tell if a speaker is effective?

The louder your speaker is, the higher the sensitivity rating. A typical speaker has a sensitivity range of 87 dB to 88 db. A great speaker has a sensitivity rating of over 90 db.

How can I check the power to my speakers?

Positive lead of the speaker should be connected to the positive battery end, and negative lead to the negative battery end. The speaker is still in good working order if it can produce a pulse.