szfzmz ZWT003 Sprinkler Wi-Fi Water Timer Instruction Manual

szfzmz ZWT003 Sprinkler Wi-Fi Water Timer

Product Information

WELCOME TO SZFZMZ

• Thank you for choosing SZFZMZ 1 Zone Smart WiFi Timer with WiFi Hub!
• After using the SZFZMZ WiFi water timer, you’ll find it easier, faster, and more convenient than ever before! You can schedule, manually operate, auto watering, and monitor flow with your smartphone. When the timer is connected to the hub and your WiFi, it can synchronize the weather forecast from the internet to automatically update and adjust your watering plan. The timer works much like other WiFi devices: as long as your phone can access the internet, you can connect the device and control your timer no matter where you are. Whatever your outdoor watering needs, SZFZMZ provides best-in-class irrigation products to help you more effectively manage and control your watering.
• Let’s start to enjoy the wonderful smart irrigation life!

Have Questions?
Email: [email protected]

Introduction

Contents in the Box

FCC Notice

This device generates radio frequency energy and may cause interference to radio and television reception. It has been typing tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient the receiving antenna
• Move the device away from the receiver
• Plug the device into a different outlet so that the device and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.

Product Overview

SGW03 1 Zone WiFi Water Timer

Specifications

• Cycle/Soak mode
• Start time and end time selection
• Days of the week selection
• Cycle duration setting
• Pause duration setting

Range Between WiFi Hub and Timer: 164 ft in the open area without interference

• Working Water Pressure: 0.5 bar to 8 bar (7.25-ll6.03PSI)
• Temperature Operating Range: 40.l°F-ll3°F (4.5 °C- 45 °C)
• Power By: 4xl.SV AA alkaline batteries (not included)
• Hose Tap Connection: 3/4″ external thread
• Waterproof:   IPSS

For outdoor use with cold water only. Keep away from freezing. In freezing weather, the timer should  be placed indoors. Used up or dead batteries must be removed from the timer and disposed of properly.

SGW03 WIFI Hub

Specification:

Range Between WiFi Hub and Router| 164 ft in the open area without interference
---|---
Input| 100-250\/ 50/60Hz
WiFi Frequency| 2.4GHzonly
Protocol| IEEE802.llb/g/n & Bluetooth
APP| Smart Life
Total Number Connected| 32
Working Temperature| -10″C-45°C(l4°F~113°F)
Working Humidity| 10%-90% RH (no condensation)

• For indoor use only. Only applicable to 2.4Ghz WiFi. If your router is a dual-band router, please independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band.

INITIAL WATER TIMER SETUP.

Insert 4 AA Batteries

1. Remove the tray on the back of the timer by sliding or pulling it out.
2. lnsert4 AA (l.SV) alkaline batteries and replace the tray. Please do not insert rechargeable batteries to avoid low voltage.

Note:

• Need to pull out forcefully when installing the battery.
• The Battery slot cannot be inserted backward, forcibly inserting it will cause damage to the battery slot.

Install the Timer
Connect the timer to an outdoor hose faucet. Your timer is ready to be used with any product attached to a standard hose faucet.

Note:
Do not place the timer in an underground valve box or anywhere your Bluetooth signal will be obstructed.

Turn on Your Water
The water must remain on for the timer to work correctly.

Initial Smart Life App Setup

Download the Smart Life App
Search “Smart Life” on APP Store or Google Play. Or scan the QR code and download the free Android or 105 app, then install the APP. If you have already installed the Smart Life APP, go to step 2.

Power the Wi-Fi Hub & Timer

• Plug the Wi-Fi Hub into an indoor outlet. (The distance between the gateway and the water timer should not exceed 50ft).

Pair the WI-FI Hub

1. Step 1 : Turn on the phone’s Bluetooth and WiFi, and tap “Add device” or “+” to add the smart device to the app. Select “Gateway Control ” or “Industry Agriculture”> add WiFi Hub .
2. Step 2 : Click “Socket Gateway(BLE)” or “irrigators (WI-Fi)”. Enter your Password and connect with Wi-Fi. (Only 2.4G Wi-Fi is supported). Waiting for connecting to be 100%. Edit the name of your Hub completed.

Note:
Choose an indoor location for your hub near the router And the outside location of your timer and within range of Wi-Fi. Avoid areas where the signal must travel through more than one wall, dirt, or thick steel barriers.

Add the Water timer
After the gateway gets connected, then add the timer on the gateway.

1. Press and hold the button on your timer around  5 seconds until the LED light rapidly flashes.
2. Tap “Add device” to add the timer in Gateway. Select “Add new device “.
3. Waiting for connecting to be 100%. Edit the name of your water timer completed.

MEET THE SMART WATER TIMER APP HOME SCREEN

Click the and + button to add a watering schedule.

Two irrigation modes:

• Normal Schedule:
  Water for a particular period in a day. In this mode, you can: Select (Start time) to decide when you want the device to start watering. Select (Irrigation Duration) and choose the time of day you want to water. Select days of the week to decide which day or days you want to water.

• Cycle/Soak: Water for a certain period several times a day. In this mode, you can: Select (Start time)to decide when you want the device to start watering and Select (End time)to stop watering. Select days of the week to decide which day or days you want to water.(Cycle Duration)Determine how long to water. (Pause Duration) Set the pause time.

AMAZON ALEXA AND GOOGLE ASSISTANT

Smart water timer with wifi hub can be used with Alexa and Google Assistant. You can find the instructions via the below steps:

1. Click the “Me” — “Alexa icon and Google Assistant” — “View more ways to link” — “Instructions”, the same way as Google Assistant.
2. If you work with Google Assistant, please follow the below command. CD Ok, Google. What is the battery level?
3. Ok, Google. start
4. Ok, Google. stop
5. If you work with Amazon Alexa, please follow the below command.
6. Alexa, what is battery on
7. Alexa, open
8. Alexa, close
9. Alexa, is open?

Note:
There is a default name for the device. You can edit the device name by yourself. And if you use the incorrect command, it will not work.

Additional Water Timmer Features

• Manual Watering

  • Your timer has the ability to allow you to manually water without disturbing the programmed schedule. Manual is used to test equipment, run an extra watering cycle in an area, or use the hose faucet without removing the timer. Click the button to activate manual watering. Using the app you can click(Left Time)set how long you want the preset manual cycle to run. Manually start the timer, the default time is 10 minutes.

• Stop Watering
  You can stop the flow of water at anytime whether it is during manual watering, or during a programmed time. Click the button once to stop watering.

• Rain Delay Function
  The rain delay function allows you to postpone watering for 24h, 48h, or 72h due to rain or when the ground is already wet. Click the button to activate manual watering. Using the app you can click set how long you want the preset rain delay feature.

Trouble shooting

Ql: Why the Bluetooth water timer didn’t turn on/off at the preset time?
Al:

• Programming is incorrect
• The water pressure is too low
• Particles of dirt or debris stuck in the valve
• More than one start time is programmed
• with overlapping schedules
• Manual watering is on
• Faulty valve
• The batteries were low
• The faucet is off

Q2: Why Bluetooth dropping connection?
A2:

• The Bluetooth of the water timer is currently in sleep mode, please wait 5-10 seconds, and the device will automatically reconnect. Or scroll down to refresh the home page of the APP, or disconnect the Bluetooth from your phone and turn it on again.
• If the device has been connected to other mobile phones, please disconnect it first.
• Make sure the device battery is charged because the Bluetooth distance is limited place the phone as close to the device as possible
• Please note that you don’t need to stay connected once you set up your schedule. The device will always keep your watering settings and work automatically according to the schedule.

Q3: Why is the water timer out of little water?
A3:
If you are a gravity feed system such as a rain barrel system, then it won’t work and will keep low water pressure. Gravity feed has no real pressure when dealing with a rain barrel. It needs pressure measuring.

Q4: The reasons for failed connection?
A4:

• Please confirm that the device is in connecting mode. (The indicator light of EZ mode flashes every 0.5 seconds; while the one for AP mode flashed slowly.)
• Please confirm that the operation on the APP is the same as the connecting mode of the device.
• Please confirm that the WiFi network is 2.4Ghz.
• Please confirm that the password is correct.

Product Usage Instructions

Cycle/Soak Mode
The Cycle/Soak mode allows you to water your plants at specific intervals throughout the day.

Start Time and End Time Selection
To set the start time, follow these steps:

1. Press the “Start Time” button on the device.
2. Use the up and down arrow buttons to adjust the hour and minute values.
3. Press the “Confirm” button to save the start time.

To set the end time, repeat the above steps using the “End Time” button.

Days of the Week Selection

To choose which day or days you want to water, follow these steps:

1. Press the “Days” button on the device.
2. Use the arrow buttons to scroll through the days of the week.
3. Press the “Confirm” button to select a specific day or days.

Cycle Duration Setting
The cycle duration determines how long the device will water during each watering session.

To adjust the cycle duration, follow these steps:

1. Press the “Cycle Duration” button on the device.
2. Use the up and down arrow buttons to set the desired duration in minutes.
3. Press the “Confirm” button to save the cycle duration.

Pause Duration Setting
The pause duration sets the time interval between each watering session.

To set the pause duration, follow these steps:

1. Press the “Pause Duration” button on the device.
2. Use the up and down arrow buttons to set the desired duration in minutes.
3. Press the “Confirm” button to save the pause duration.

FAQ

1. Q: How many times a day can I schedule watering?
   A: You can schedule watering multiple times a day using the Cycle/Soak mode.

2. Q: Can I select specific days to water?
   A: Yes, you can choose which day or days of the week you want to water.

3. Q: How long can I set the watering duration?
   A: You can set the watering duration in minutes according to your specific needs.

4. Q: Is it possible to adjust the interval between watering sessions?
   A: Yes, you can set the pause duration to determine the time interval between each watering session.

Customer Service

The timer has a 1-year warranty from the day of purchase. If you have any questions, please feel free to contact support [email protected]. We will follow up and respond within 24 hours. The following conditions are not included,

• Problems occur due to its use for other purposes, or improper use or use of components not supplied by SZFZMZ.
• Damages caused by improper use1 for example1 wrong power supply, artificial damage,  etc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>