KOBALT 54013 Folding Wall Mounted Worktable Instruction Manual
- June 12, 2024
- Kobalt
Table of Contents
KOBALT 54013 Folding Wall Mounted Worktable
Product Information
- Item #: 5105889
- Model #: 54013
- Product: Folding Wall-Mounted Worktable
Assembly Instructions
- Locate the wood stud on the wall using a stud finder if necessary.
- Measure 16 inches apart from center to center and mark lines and mounting holes on the wall at a desired installation height.
- Using screws (BB), secure brackets (A) onto the wall, making sure they are on the same level. Only fix the screws, do not tighten.
- Note: Two brackets must be installed at the same level and vertical to the ground. Install into wood stud only.
- Unfold the brackets and make sure they are locked in place.
- Measure the distance between brackets at both top and bottom to ensure it is the same.
- Using screws (AA), complete the brackets installation. Tighten all screws (AA) & (BB).
- Note: For cement wall installation, please use the proper anchor (not included).
- Place the bench top (B) on brackets (A), centered.
- Using screws (CC), secure the bench top (B) onto the brackets (A).
- When not in use, gently press the handles (tongues) upwards at the front ends to allow the table to fold down.
Care and Maintenance
On an annual basis, it is recommended to double-check all connections and
re-tighten all screws. Clean with a soft clean cloth towel. Never use water to
clean. Always use protective pads under hot dishes and plates. Liquid spills
need to be removed immediately. Always use protective pads under hot dishes
and plates.
Warranty
Lifetime Hassle-Free Guarantee. You should never have a problem with your
Kobalt tools. However, if you do, return the item to the place of purchase for
a free replacement. No questions asked. This warranty excludes screws. For
warranty information, call 1-888-3KOBALT, 8 a.m. – 8 p.m., EST, Monday –
Sunday. You could also contact us at
[email protected].
PACKAGE CONTENTS
HARDWARE CONTENTS
SAFETY INFORMATION
- Please read and understand this entire manual before attempting to assemble, operate or install the product. Failure to follow may result in serious injury.
- Make sure the brackets are locked before use to prevent the brackets from folding down and may cause injury.
- Weight capacity: 400 lbs. Evenly distributed.
WARNING: Do not allow children to climb or play in or around this product. Overload may cause product instability and may cause injury. Distribute weight evenly.
PREPARATION
- Before beginning assembly of the product, make sure all parts are present.
- Compare parts with the package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS
-
Locating the wood stud (with stud finder if necessary). Measure 16 in apart center to center, mark lines, and mount holes on the wall at a desired installation height. Using screws (BB), secure brackets(A) onto the wall and make sure it is on the same level. Only fix the screws, not tighten them.
Note: Two brackets must be installed at the same level and vertical to the ground. Install into wood stud only. -
Unfold the brackets and make sure they are locked in place. Measure the distance between brackets at both top and bottom to make sure it is the same. Using screws (AA), complete the brackets installation. Tighten all the
screws (AA) & (BB).
Note : For cement wall installation, please use the proper anchor (not included). -
Place bench top (B) on brackets (A) centered. Using screws (CC), secure bench top (B) onto brackets (A).
-
When not in use, gently press the handles (tongues) upwards at the front ends to allow the table to fold down.
CARE AND MAINTENANCE
On an annual basis, it is recommended to double-check all connections and re- tighten all screws. Clean with a soft clean cloth towel. Never use water to clean. Always use protective pads under hot dishes and plates. Liquid spills need to be removed immediately. Always use protective pads under hot dishes and plates.
WARRANTY
Lifetime Hassle-Free Guarantee.
You should never have a problem with your Kobalt tools. However, if you do,
return the item to the place of purchase for a free replacement. No questions
asked . This warranty excludes screws. For warranty information, call
l-888-3KOBALT, 8 a.m. -8 p.m., EST, Monday-Sunday. You could also contact us
at [email protected].