PHILIPS 70100041 Battery Powered Friends of Hue Switch User Guide

PHILIPS 70100041 Battery Powered Friends of Hue Switch

Battery Powered Friends of Hue Switch

Product Description: The Friends of Hue switch is a wireless transmitter that communicates with Philips Hue bridge. The switch uses a CR2430 battery that powers a built-in transmitter. This transmitter sends wireless radio signals that are used to remotely control the Philips Hue system. The switch can be configured through Hue App after added to the Hue bridge. It enables to control designated light devices in 2 designated rooms with 4 buttons. Functions of the 4 buttons can be configured separately through Hue App. The configurable functions includes ON/OFF, dim up/dim down, and system preset scene control.

Product Data:

• Switch Type: Wireless transmitter
• Transmission Range: 10-30m (typical)
• Radio Frequency: 2.4GHz
• Power Supply: 3V(1xCR2430 battery)
• Buttons: 4
• Dimensions: 80.5×80.5×14.7mm / 86x86x14mm
• Operating Temperature: -20°C to +45°C
• Working Humidity: 10% ~ 95% RH non-condensing
• Waterproof Grade: IP20
• Warranty: 5 years

Installation:

The remote control can be fixed on the wall with 3M glue or screw. The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufactures as below list:

• BEKER
• GIRA
• JUNG
• MERTEN

There are two frame options available: with plastic frame (14.7mm) and with glass frame (10.10 mm).

Usage Instructions:

Add the Switch to Hue Bridge:

1. Configure your Hue Bridge correctly and add light devices to the Hue Bridge through Hue App as instructed.
2. Tap Accessory setup on Settings page, then tap Add accessory, then tap Friends of Hue switch.
3. Tap a brand to select it, any brand will work. Then operate the switch as instructed to enable it to be added to the Hue Bridge.
4. Note: different Hue Bridges may instruct you to operate different buttons during adding process, the above instruction is just an example, please kindly operate the buttons as instructed by your Hue Bridge since the buttons it requires you to operate may be different from the above example.

Select Designated Room/Rooms to Control

1. Tap to select a room to be controlled by left side on the switch, then right side.

Configure the Switch through Hue App:

1. Once added successfully, you can use the system-suggested setting or configure the switch as per your preferences. Just tap Done to use suggested setting, or tap change settings to configure as instructed. 4 buttons can be configured one by one separately.
   Tap the button area to select the button to be configured.

Control the Light Devices in the Selected Room/Rooms with the Switch:

1. After configured successfully, tap save at upper right corner to save the settings. Then you can use the switch to control the light devices in the selected room/rooms.

Important: Read All Instructions Prior to Installation

Function introduction

With Plastic Frame

With Glass Frame

Product Data

Product Description

The Friends of Hue switch is a wireless transmitter that communicates with Philips Hue bridge. The switch uses a CR2430 battery that powers a built-in transmitter. This transmitter sends wireless radio signals that are used to remotely control the Philips Hue system.
The switch can be configured through Hue App after added to the Hue bridge. It enables to control designated light devices in 2 designated rooms with 4 buttons. Functions of the 4 buttons can be configured separately through Hue App. The configurable functions includes ON/OFF, dim up/dim down, and system preset scene control.

Safety & Warnings

DO NOT expose the device to moisture.

Operations

Add the Switch to Hue Bridge

• Step 1: configure your Hue Bridge correctly and add light devices to the Hue Bridge through Hue App as instructed.
• Step 2: tap “Accessory setup” on the “Settings” page, then tap “Add accessory”, then tap “Friends of Hue switch”.
• Step 3: tap a brand to select it, any brand will work. Then operate the switch as instructed to enable it to be added to the Hue Bridge.
• Note: different Hue Bridges may instruct you to operate different buttons during adding process, the above instruction is just an example, please kindly operate the buttons as instructed by your Hue Bridge since the buttons it requires you to operate may be different from the above example.

Select designated room/rooms to control

• Step 1: Tap to select a room to be controlled by left side on the switch, then right side.

Configure the Switch through Hue App
Step 1: once added successfully, you can use the system-suggested setting or configure the switch as per your preferences. Just tap “Done” to use suggested setting, or tap “change settings” to configure as instructed. 4 buttons can be configured one by one separately. Tap the button area to select the button to be configured.

Control the Light Devices in the Selected Room/Rooms with the Switch
After configuring successfully, tap “save” at upper right corner to save the settings. Then you can use the switch to control the light devices in the selected room/rooms.

Installation

The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufactures as below list:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>