Shenzhen Gospell Smarthome Electronic T5703HCT HD WiFi Camera User Guide
- June 6, 2024
- Shenzhen Gospell Smarthome Electronic
Table of Contents
Shenzhen Gospell Smarthome Electronic T5703HCT HD WiFi
Before using the product, please read the guide carefully to avoid any damages to the product in virtue of faulty operation or misuse.
Package List
The picture is only for reference and the real object shall prevail.
Appearance Technical Parameters
All parameters change without prior notice. The finial right of interpretation is reserved by the company.
Installation
Preparation for Installation
-
2.4G wireless router is required；
-
Support Android 4.44 and above, iOS 9.0 and above；
-
Download APP: Please select one of below two methods to download the APP, then complete the installation and account registration
A： Scan the QR code to download APP
B： Search the APP name “GESCOM” on Google Play or App Store
Remark: The APP interface may be upgraded and adjusted at any time, subject to app as its actual basis without prior notice -
Add a device: Open the APP home page.click the “Add Device” icon to connect your camera. According to the settings guide in the APP, you can configure multiple cameras at the same time.
Connect to the power supply
- Find the power interface behind the product and power on the camera,The indicator will turn on.
- Please make sure the camera and smartphone are connecting to the same 2.4GHz band WiFi.
Camera Indicator Instruction
FCC Certification info
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
This device is acting as slave and operates in the 2.4 GHz (2412 ~2462 MHZ)
band.
Ad Hoc function is supported but not able to operate on non-US frequencies.
Do not use the device with an environment below minimum -10 ℃ or maximum over
50℃.
Hereby, we declare that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Notice : Observe the national local regulations in the location where the
device is to be used. This device may be restricted for use in some or all
member states of the European Union (EU).
EU Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.