floorMuffler 0264070 Premium Underlayment for Luxury Vinyl Floors User Guide
- June 3, 2024
- floorMuffler
Table of Contents
floorMuffler 0264070 Premium Underlayment for Luxury Vinyl Floors
Installation Instructions
- Make sure the subfloor is structurally sound, level and is free of dust and debris.
- Check for protruding nails and/or defects in the subfloor. If installing over concrete, the concrete must be dry with moisture emission rates that do not exceed 3 lbs. per 1000 square feet per 24 hours as measured by the Anhydrous Calcium Chloride Test.
- Start in a corner and begin installing the f loorMuf f ler® LVT parallel to the wall in the opposite direction that you plan to install the flooring planks.
- When installing the f loorMuf f ler® LVT, leave at least 2” going up the wall.
- Roll out the next roll of f loorMuf f ler® LVT in the same manner, making sure that the foam seams are butted together.
- If installing f loorMuf f ler® LVT on concrete or below-grade subfloors, be sure to tape the seams together with 2” tape that meets the moisture vapor transmission rate for this type of installation.
- Install the flooring per the manufacturer’s instructions.
FLOOR MUFFLER® LVT ULTRASEAL
FOR ADHERING THE FLOORMUFFLER TO THE LUXURY VINYL FLOOR.
The adhesives below have been tested and approved by the respective
manufacturer for the installation of floor muffler underlayment. Diversified
Industries has not independently verified this information. Contact the
adhesive manufacturer directly to obtain their installation instructions and
warranty information prior to use.
FOR ADHERING THE UNDERLAYMENT TO A WOOD OR CONCRETE
SUBFLOOR
- Let’s get social
- floormuffler.com 1 800 440 6008
References
Read User Manual Online (PDF format)
Loading......