Purmass P Series Portable Power Station User Manual

Purmass P Series Portable Power Station

Product Information

Specifications

• Compliance: FCC Part 15
• Operating Conditions: Indoor use only
• Operating Distance: Keep at least 20 cm distance from the device

Product Usage Instructions

Safety Precautions
Before using the product, please read and understand the following safety precautions:

• Do not expose the device to water or any other liquids.
• Avoid using the device near flammable materials.
• Ensure proper ventilation around the device to prevent overheating.
• Keep the device away from direct sunlight and extreme temperatures.
• Do not disassemble or attempt to repair the device yourself. Refer to authorized service centers for any maintenance or repairs.

Installation
To install the product, follow these steps:

1. Select a suitable location for the device, keeping in mind the operating distance requirement of at least 20 cm.
2. Place the device on a stable surface, ensuring it is not tilted or unstable.
3. Connect the power cable to an appropriate power source.
4. Verify that the device is receiving power by checking the indicator light.
5. If applicable, connect any additional cables or accessories according to the user manual.

Operating the Device
To operate the device, follow these instructions:

1. Ensure that the device is properly installed and powered on.
2. Refer to the user manual for specific functions and controls.
3. Use the appropriate buttons, switches, or interfaces to navigate through the device’s features.
4. Follow any on-screen prompts or instructions provided by the device.
5. If experiencing any issues or difficulties, refer to the troubleshooting section of the user manual or contact customer support.

FAQ (Frequently Asked Questions)

• What is FCC Part 15 compliance?
  FCC Part 15 compliance ensures that the device meets radio frequency emissions standards set by the Federal Communications Commission (FCC) for electronic devices that are sold or used in the United States.

• Can I use the device outdoors?
  No, the device is designed for indoor use only. Using it outdoors may result in damage to the device and can void the warranty.

• How do I know if the device is receiving power?
  Check the indicator light on the device. If it is illuminated, the device is receiving power. If not, ensure the power cable is properly connected and try a different power source if necessary.

Specification

Product Appearance

Display Indicator

1. High Temperature Indicator
   When P300&P600 are in high temperature, the high temperature indicator will be lit. Please cool down the P300&P600 before using.

2. Low Temperature Indicator
   When P300&P600 are in low temperature, the low temperature indicator will be lit. Please use it after the temperature is restored to above 5 °C.

3. Battery Temperature Indicator
   When the battery temperature is in abnormal, the battery temperature indicator will be lit.

4.  Remaining Charge/Discharge Time

5. AC Indicator
   The AC indicator icon will appear on the LCD display when the AC power button is turned on.

6. USB-A Indicator
   The USB-A output icon will appear on the LCD display when the USB-A port is turned on.

7. USB-C(Type-C)lndicator
   The USB-C output icon will appear on the LCD display when the USB-C port is turned on.

8. DC &Car Indicator
   The Car Output icon will appear on the LCD display when the DC&Car Output is turned on.

9.  RD Battery Percentage

10. Current Input Power
    Shows the current input power of P300&P600 in watts.

11. Current Output Power
    Shows the current output power of P300&P600 in watts.

Button Operation

1. Long press the power button to power on the product, the LCD display will be lit and the main power indicator icon will appear on the LCD display. If do not turn on the output, this product will be turned off automatically 1 minute later. When the product is started, short press AC power button, DC power button or USB power button to turn on output. Long press to turn off.
2. Long press LED power button to turn on/off the LED light. Short press to switch modes. lighting mode – alarm mode — SOS mode — lighting mode, cycle in order.) When the LED light is turned on, it needs to long press the power button to turn off as it will not turn off automatically.
3. When the product is started while AC output is turned off, P300: holding the AC power button and DC power button for 2s can switch the frequency and save, cycle in order. P600: holding the AC power button for 2s can switch the frequency and save, cycle in order.
4. When AC output is turned on, the fan stops after 3s rotation. The AC output will be automatically turned off if no devices loaded for 8 hours. (in the case of other functions are turned off).
5. If AC output are in a short circuit or overload, AC indicator will flashes and the buzzer (once per second) will sound and stop 1 minute later. (In the case of other functions are turned off, the product will turn off automatically.) AC supports charging and discharging. When the battery level is higher than 95%, charging will stop. When the battery level is lower than 90%, charging will start.
6. When the battery capacity drains to 10%, recharging indicator icon will flash on the LCD display in 0.5Hz and the buzzer will alarm synchronously, short press the AC power button or recharge to stop alarming. When the battery capacity drains to 5%, recharging indicator icon will flash on the LCD display in 1Hz and the buzzer will alarm synchronously, short press the AC power button or recharge to stop alarming. When the battery capacity drains to 0%, the output will be turned off and the buzzer will sound 9 times ( once per second), short pressing AC power button and recharging can stop alarming during beeping.
7. The USB output and DC output will be automatically turned off if no devices loaded for 5 minutes. The AC output will be automatically turned off if no devices loaded for 8 hours.

Recharging Ways

Note: Please fully charge the new product before using it for the first time. If this product is stored for a long time (3 months to 6 months) in the case of battery depletion, its function will deteriorate, even making it impossible to charge. It is suggested to regularly check the remaining battery and charge it to about 60%-80% if it needs to be stored for a long time.

AC charging
Connecting the equipped AC adapter to the DC input port of the power station for charging. The charging battery level and charging power will appear on the LCD display.

Car charging
Please charging the power station after the car’s ignition is turned on, so as not to cause any damages to car battery, like unable to start the car due to power loss. And please make sure car charging port and the cigarette lighter of the car charger cable are reliably connected. Our company is not liable for any damages due to the failure to comply with the user manual.

Solar Panel charging
Users can recharge the power station by connecting one or two solar panels as shown in follow pictures.

• **Connecting one solar panel

**

• **Connecting two solar panels

**

  *  **Note 1** : P300 supports up to 100W solar panel charging. P600 supports up to 200W solar panel charging.
  *  **Note 2:** Solar panel is not included and needs to be purchased separately.

Warnings and Precautions

Before using this product, please comply with the basic specifications, including:

1. Please read all instructions carefully before using.
2. To reduce the risk of injury, close monitoring is required when using this product near children.
3. Using accessories recommended or sold by non-specialist product manufacturers may result in the risk of electric shock.
4. Please pull the power plug out of the socket when the product is not in use.
5. It is forbidden to disassemble the product which may cause unpredictable risks such as fire, explosion or electric shock.
6. It is forbidden to use this product with damaged wires or plugs, or damaged output cables, which may cause risk of electric shock.
7. Please ensure proper ventilation while in charging. Do not restrict the ventilation of the product in any way.
8. Please place the product in a dry and well ventilated place to avoid rain.Product immersed water may cause risk of electric shock.
9. It is forbidden to place the product near heat sources, which may lead to safety accidents such as fire and explosion.
10. It is forbidden to operate or place the product in high temperature(under direct sunlight or inside the car with high temperature ),otherwise it may cause risks such as internal battery overheating, fire, malfunction or battery life shortened.
11. It is recommended to recharge the product every three months to prevent low power when in use.

FAQS

• Can this product be brought on a flight?
  No, because this is Lithium battery products. Under International Air Transport Standard we are not allowed to take any battery exceeding 1 00Wh on a plane.

• Why the devices can not be charged within the range of rated output power?

  • The battery of this products might be less than 20% capacity, which needs to be charged first.
  • The start power of some devices might exceed the peak power of this product, or the nominal power of some devices might exceed the actual power of this product. It is recommended to choose a product with higher power (watts) of our company to meet the needs of power supply.

• Why does this product sound when used?
  This product adopts an air-cooled system, built-in fan to better dissipate heat, so it is normal to have slight noise when using.

• ls it normal for the adapter hot while charging?
  It is normal. The equipped adapter meets national safety standards, please feel free to use it.

• Why does the output automatically turn off after being connected with the low power devices for several hours?
  When connecting to a low power device, this product is set to automatically turn off for a certain period of time to avoid battery drainage when forgetting to turn off the output during use.

Package List

• Power station*1
• AC power adapter*1
• User manual*1

TROUBLESHOOTING

Warranty and Contacts

It is guaranteed to the user that in the case of normal use, the product will not have defects in the process and materials that affect the use of the product. This warranty statement sets forth the full and exclusive warranty obligations of the product, and our company will not assign or authorize any third party to assume any responsibility for the products we sell.

Warranty Period
The warranty period of our product includes 12 months Free warranty and 12 months extended warranty.The warranty period is effective from the date of purchase by the users. In order to protect your warranty rights, please keep the purchase certificate properly.

Warranty do not apply to:

1. The appearance of the product is damaged after use.
2. Users disassemble or repair the products on their own.
3. Any damage caused by users’ intentional behaviors.
4. Any damage caused by force majeure, such as natural disasters, lightning or other accidents.

How to get a warranty service
To obtain warranty service, please contact +86-756-8628535.

ABOUT COMPANY

• Zhuhai Jingding Technology Co., LTD
• Website: www.jdpowertec.com
• Service hotline: +86-756-8628535
• !Address: 1115, Building 2, No.1 Hagongda Road, 519085 Zhuhai City, China

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>