Square D S29305 DIN Rail Mounting Kit for H and J frame Circuit Breakers Instructions
- June 13, 2024
- SQUARE D
Table of Contents
Square D S29305 DIN Rail Mounting Kit for H and J frame Circuit Breakers Instructions
Retain for future use.
Kit Contents
Tools Needed
Part
Screwdriver (Pozidriv® No. 1 or 2 or Slotted) /
Wrench (7 mm) /
⚠ DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
- Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E.
- This equipment must be installed and serviced only by qualified electrical personnel.
- Turn off all power supplying this equipment before working on or inside equipment.
- Always use a properly rated voltage sensing device to confirm power is off.
- Replace all devices, doors and covers before turning on power to this equipment.
INSTALLATION
CAUTION
HAZARD OF EQUIPMENT DAMAGE
Do not use DIN-rail mounting bracket with motor operated circuit breakers.
Failure to follow this instruction can result in equipment damage.
- Turn off all power supplying this equipment before working on or inside equipment.
- Turn off (O) circuit breaker.
- Install circuit breaker and mounting bracket assembly (A) on DIN rail (B) as shown in Figure 1.
Figure 1 : DIN Rail Mounting
Circuit breaker can now be placed into service.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
Schneider Electric USA 3700 Sixth St SW Cedar Rapids, IA 52404 1-888-SquareD (1-888-778-2733) www.us.SquareD.com
© 20042005 Schneider Electric All Rights Reserved
Released for Manufacturing
Printed on 2022/05/24
References
- Schneider Electric Canada | Global Specialist in Energy Management and Automation
- Schneider Electric Mexico | Servicios de Renovación y Retrofit de Schneider Electric
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>