Moveis Estrela 29331 Fast Car Child 008 Bed 22A Instruction Manual
- June 3, 2024
- Moveis Estrela
Table of Contents
29331 Fast Car Child 008 Bed 22A
Instruction Manual
29331 Fast Car Child 008 Bed 22A
Necessary people for assembly
1 ‘Adult
Tools needed (not inclued)
SAFETY INFORMATION
- This package contains small parts, keep away from children until the product is assembled.
- The instructions are generic, the figures may vary.
- Read all instructions carefully before starting assembly.
- Separate and store the ID tag.
- Check if the volumes and quantities of pieces described in the manual are correct.
- Identify the pieces and separate accessories.
- The assembly of the product shall be made on a clean and flat surface. We recommend using the package itself to cover the floor in order not to damage the product.
- Reserve a specific area to assembly the product.
- Avoid shocks and contact with sharp objects.
- Do not expose the furniture to excessive heat (direct sunlight), or high humidity.
- For cleaning use a dry soft cloth or slightly moistened with water.
Do not use cleaning agents or abrasives
SUPPORTED WEIGHT / DIMENSIONS ASSEMBLED PRODUCT
HARDWARE
A. Screw CC Philos.| B. Screw CC Phillips| C. Cooma Nove| D. Dowel| E. Plastic
‘Support| F. Adhesiva Label
---|---|---|---|---|---
QTD. Dimensdo: Materlal
08 5,0 x 50 Metal| QTD. Dimensdo: Materlal
24 3,0x 20 Metal| QTD. Dimensdo: Materlal:
02 17x17x79 Metal| QTD. Dimensdo: Materlal:
02 6×30 Madelra| QTD. Dimensdo: Materlal:
08 60x60x10 Plastleo| QTD. Dimensdo: Materlal:
08 12mm Plastica
G. Shoes Rectangular| H. Nail 8×8| I. Screw Flangeado| J. Screw CC Phillips|
K. Cylindrical nut| L. Tag
QTD. Dimensdo: Materlal
04 50×12 Plastica|
QTD. Dimensdo: Materlal
08 19×1 Metal|
QTD. Dimensdo: Materlal
08 40×35 Metal|
QTD. Dimensdo: Materlal
12 35×12 Metal 0|
QTD. Dimensdo: Materlal
8 12×09 Plastica|
QTD. Dimensdo: Materlal
01 37×13 Plastica
M. Soporte| N. pilicw| | | |
QTD. Dimensdo: Materlal
02 20×20 Metal|
QTD. Dimensdo: Materlal
02 190×230×40 Tecido| | | |
REAL SCALE HARDWARE
IDENTIFICATION OF PARTS
| COD. | IDENTIFICATION OF PARTS | COR 1881 | MEDIDAS (mm) | MAT. |
|---|---|---|---|---|
| QTD | COMP | LARG | ESP | |
| 29331 | Right side | Red | 1 | 2073 |
| 29331 | left side | Red | 1 | 2073 |
| 29331 | Headboard | White | 1 | 900 |
| 29331 | Upper footboard | White o | 1 | 900 |
| 29331 | Bottom Peeler | White | 1 | 900 |
| 29331 | base of the platform | CRU | 3 | 1850 |
| 29331 | Traverse of the platform | CRU | 4 | 910 |
TECHNICAL ASSISTANCE
When request the technical assistance, please inform the number of the
piece name and color of the product and also the batch manufacturing date,
that is stamped on the piece n° 06.
PRODUCT ASSEMBLY
Step 1
- Make the assemblies as indicated in the steps below.
| D. Dowel | K. Cylindrical nut |
|---|
QTD. Dimensao: Material
02 6×30 Madeira| QTD. Dimensao: Materia
08 12×09 Plastica
G. Shoes Rectangular| M. Gusset
QTD. Dimensao: Material
4 50×12 Plastica| QTD. Dimensao: Material
02 20×20 Metal
H. Nail 8×8|
QTD. Dimensao: Material
08 19×1 Metal|
Step 2
| A. Screw CCPhillips | C. Comer Brace |
|---|
QTD. Dimensic: Material:
04 = 50×50 Metal| QTD. Dimensdo: Material:
01 17x17x46 = Metal
F. Adhesiva Label| J. Sere Ce Philos
QTD. Dimensdo: Material:
04 12mm Plastica| QTD. Dimensdo: Material:
05 -3,5×12 Metal
Step 3
C. Comer Brace
QTD. Dimensdo: Material:
01 17×17×46 Metel
| F. Adhesiva Labef | E. Screw CC Phillips | A. Screw CC Phillips |
|---|
QTD. Dimenstic: Material:
04 12mm Plastica| QTD. Dimenstic: Material:
05 35×12 Metal| QTD. Dimenstic: Material:
04 5,0×50 Metel
E. Plastic Support| I. Screw Flangeado|
QTD. Dimenstic: Material:
08 60×60×10 Plastico| QTD. Dimenstic: Material:
08 4,0×35 Metal|
Step 4
B. Screw CC Phillips
QTD. Dimensdo: Material:
24 3,0x 20 Metal
Step 5
PASS THE ROPES L THROUGH THE HOLES
| N. Pillow | L. Tag |
|---|
QTD. Dimenséo: Material:
02 190x230x40 _Tecido| QTD. Dimenséo: Material:
01 37×13 Plastica
Avenida Maracana, 4244 – Parque
Industrial
Arapongas – PR – Brasil
Fone: +55 (43) 3274-8800
www.moveisestrela.com.br