Govee H5051 WiFi Thermo Hygrometer User Manual
- June 6, 2024
- Govee
Table of Contents
- At a Glance
- Packing List
- Specifications
- Installing Your Device
- Downloading the Govee Home App
- Connecting to Wi-Fi
- Using Your Device
- Troubleshooting
- Warning
- Customer Service
- Compliance Information
- Environmentally friendly disposal
- FCC Statement
- FCC Radiation Exposure Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
Model: H5051
Wi-Fi Thermo-hygrometer
At a Glance
Packing List
| Thermo-hygrometer | 1 |
|---|---|
| AAA Battery | 3 |
| Wall Bracket | 1 |
| Desktop Bracket | 1 |
| 3M Adhesive | 1 |
| User Manual | 1 |
| Thanks Card | 1 |
Specifications
| Accuracy | Temp: ±0.54°F/±0.3°C |
|---|---|
| Working Temperature | Humidity: ±3% |
| Working Humidity | 4°F to 140F /-20°C to 60C 0%- 99% |
| Bluetooth-enabled Distance | 15m/49.2ft (No obstacles) |
| Wi-Fi-enabled Distance | 30m/98.4ft (No obstacles) |
Installing Your Device
1. Pull out the insulation sheet;
2. Set up
Desktop installation
Downloading the Govee Home App
What you need:
- Download the Gove Home app from the App Store (iOS devices) or Google Play (Android devices).
- A smartphone or tablet running iOS 9.3 (or above) or Android 4.3 (or above).
Connecting to Wi-Fi
Notice:
Please make sure the Wi-Fi is 2.4GHz and 802.11 b/g/n bands before connecting.
Turn on Bluetooth and connect your phone to Wi-Fi
Open Gove Home, tap the “+” icon at the top right corner “My Devices”, select
“H5051”
Select “H5051_XXXX”
Press and hold for 3 seconds. Name the device.
Enter the password of Wi-Fi. More functions for you after
connecting successfully.
If the connection fails, please check the above steps and try again.
Using Your Device
Control the device with Gove Home.
Unit Switch
Switch temp unit in-app (Note: Temp unit in export data is the same as that
in-app).
Data Export
Export data in CSV format after filling in email and time slot.
Alert me
The app pushes alert messages once temp/humidity is beyond preset range.
Calibration
Calibrate temp/humidity data.
Upload Interval
Change data upload intervals.
Reset Wi-Fi
Switch to a new Wi-Fi.
Delete Data
Delete data stored onboard and in Cloud.
Troubleshooting
1. Fail to control the device in-app.
a. Make sure your phone is within Bluetooth-enabled range.
b. Keep your phone as close as possible to the device.
2.No/Delayed message alert.
a. Check whether the Wi-Fi connection and phone signal are stable.
b. Make sure Govee Home is allowed on your phone.
c. Keep the device close to the router.
d. No obstacles between device and router are suggested.
e Lost Wi-Fi connection frequently.
a. Set up the device within the Wi-Fi-enabled range (less than 30m/98ft).
b. No obstacles between device and router are suggested.
Warning
1. Please make sure the device works within operating temp/humidity.
2. Do not disassemble it violently.
3. Keep the devices away from water.
Customer Service
warranty: 12-Month Limited Warranty
support: Lifetime Technical support
Email: support@govee.com
Official Website: www.govee.com
Compliance Information
Compliance Statement:
Shenzhen lntellirocks Tech Co. Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of
the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at
www.govee.com/
EU contact address: BellaCocool GmbH
(E-mail:info@bellacocool.de) Pettenkoferstrae 18, 10247
Berlin, Germany
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Gove is a trademark of Shenzhen lntellirocks Tech Co.Ltd. Copyright ©2020
Shenzhen lntellirocks Tech Co.Ltd. All Rights Reserved.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>