newtech CL120H430 Evoke and Quadro Heated Towel Rail Instruction Manual

new tech CL120H430 Evoke and Quadro Heated Towel Rail

Thank you for purchasing a Newtech Heated Towel Rail.

• This heated towel rail has been crafted using high quality durable stainless steel and will have a long lasting and productive life provided it is used in accordance with manufacturers general conditions.
• This towel rail must be installed by a registered electrician.
• This product is designed to be used at a stabilised temperature of 60˚C under towelling, depending on towel dryness and ambient temperature.
• This product comes with a ten year warranty. If you feel you have a complaint or issue with this towel rail, in the first instance contact the retailer from whom you
• purchased this product. Newtech will endeavour to provide a satisfactory outcome for your complaint. If the retailer or installer needs to discuss any installation issues, then please use the following contact details:

Phone 0800 728 662 Fax 06 344 2597 Emailsales@newtech.co.nz

CARE OF YOUR TOWEL RAIL

To clean, use mild cleaning detergents. Any harsh scrubbing or scratching of the product surface is strictly prohibited, same to the use of any cleaning products which contain acid or any corrosive agents. If you are loving your Newtech Towel warmer tell others; if you are not tell US!
WARNING
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
WARNING: In order to avoid a hazard for very young children, this appliance should be installed so that the lowest heated rail is at least 600mm above the floor.
The installation of the towel rail must be performed by a registered electrician and installation is to comply with AS/NZS 60335.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. All pole disconnection in the fixed wiring shall be provided.

ELECTRICAL INSTALLATION

Please ensure your towel warmer is installed by a registered electrician and ensure the electrical supply, plug and switch location, and product location will comply with your local regulations. New Zealand electrical wiring requirements stipulate that this must be adhered to. This appliance must be fitted with an air gap phase isolation switch which isolates the “Phase” and “neutral” in accordance with local wiring regulations. This product must be used in conjunction with a hard wired switch.

WARRANTY

The Evoke & Quadro Heated Towel Rails offer a 10 Year Warranty in materials and workmanship. Colour finishes Matte Black, Brushed Brass, Gunmetal & Brushed Copper offer a 5 Year Warranty.

To use the warranty repair and service, the customer must provide the purchase invoice/receipt, and any other relevant documents. If the product has problems or develops faults within the warranty period due to normal wear and tear, Newtech at it’s discretion will recognise whether it is a faulty product or not. If it is impossible or not economic for the manufacturer to repair the product, the manufacturer will replace the faulty product with a new unit of the same model or; if there is no stock available for the same model, the manufacturer will replace the faulty product with a new unit of a similar size. The repair service offered within the warranty period only covers the faults and problems developed by the manufacturers errors. Any damage caused by improper use or carelessness is not covered by the warranty. Newtech is not responsible for any monetary loss or injuries caused by improper use of the product.

SPECIFICATIONS

Evoke Ladders

Model| Product Size (mm) H X W X D| Power (W)| Vertical Distance| Horizontal Distance
---|---|---|---|---
SL115| 530 x 600 x 122| 55| 330| 568
SL115B| 530 x 600 x 122| 66| 330| 568
SL115NK| 530 x 600 x 122| 55| 330| 568
SL115GM| 530 x 600 x 122| 55| 330| 568
SL115BB| 530 x 600 x 122| 55| 330| 568
SL115CP| 530 x 600 x 122| 55| 330| 568
SL115MW| 530 x 600 x 122| 66| 330| 568
CL100| 800 x 600 x 122| 77| 600| 568
CL100B| 800 x 600 x 122| 93| 600| 568
CL100NK| 800 x 600 x 122| 77| 600| 568
CL100GM| 800 x 600 x 122| 77| 600| 568
CL100BB| 800 x 600 x 122| 77| 600| 568
CL100CP| 800 x 600 x 122| 77| 600| 568
CL100MW| 800 x 600 x 122| 93| 600| 568
SL130| 800 x 450 x 122| 60| 600| 418
SL130B| 800 x 450 x 122| 73| 600| 418
SL130NK| 800 x 450 x 122| 60| 600| 418
SL130GM| 800 x 450 x 122| 60| 600| 418
SL130BB| 800 x 450 x 122| 60| 600| 418
SL130CP| 800 x 450 x 122| 60| 600| 418
SL130MW| 800 x 450 x 122| 73| 600| 418
CL120| 430 x 600 x 120| 44| 230| 568
SL125| 530 x 800 x 122| 70| 330| 768
SL150| 1060 x 600 x 122| 98| 860| 568
SL155| 1060 x 450 x 122| 78| 860| 418

Quadro Ladders

Model| Product Size (mm) H X W X D| Power (W)| Vertical Distance| Horizontal Distance
---|---|---|---|---
ST65| 530 x 600 x 120| 58| 330| 570
ST65B| 530 x 600 x 120| 68| 330| 570
ST65NK| 530 x 600 x 120| 58| 330| 570
ST65GM| 530 x 600 x 120| 58| 330| 570
ST65BB| 530 x 600 x 120| 58| 330| 570
ST65CP| 530 x 600 x 120| 58| 330| 570
ST65MW| 530 x 600 x 120| 68| 330| 570
ST75| 800 x 600 x 120| 82| 600| 570
ST75B| 800 x 600 x 120| 96| 600| 570
ST75NK| 800 x 600 x 120| 82| 600| 570
ST75GM| 800 x 600 x 120| 82| 600| 570
ST75BB| 800 x 600 x 120| 82| 600| 570
ST75CP| 800 x 600 x 120| 82| 600| 570
ST75MW| 800 x 600 x 120| 96| 600| 570
ST78| 800 x 450 x 120| 65| 600| 420
ST78B| 800 x 450 x 120| 75| 600| 420
ST78NK| 800 x 450 x 120| 65| 600| 420
ST78GM| 800 x 450 x 120| 65| 600| 420
ST78BB| 800 x 450 x 120| 65| 600| 420
ST78CP| 800 x 450 x 120| 65| 600| 420
ST78MW| 800 x 450 x 120| 75| 600| 420
ST60| 430 x 600 x 120| 46| 230| 570
ST95| 530 x 800 x 120| 76| 330| 770
ST85| 1060 x 450 x 120| 85| 860| 420
ST80| 1060 x 600 x 120| 107| 860| 570
Power Supply : 230 – 240 Volt AC, 50Hz

International Protection Rating: IP45

INSTALLATION OPTIONS

Exposed Wiring Kit Installation

Concealed Wiring Kit Installation

• Top Leg Installation
• 281 Heads Road, PO Box 2050, Wanganui, New Zealand Phone: 06 349 0194 or 0800 728 662
• Email: sales@newtech.co.nz
• www.newtech.co.nz

Documents / Resources

| newtech CL120H430 Evoke and Quadro Heated Towel Rail [pdf] Instruction Manual
CL120H430 Evoke and Quadro Heated Towel Rail, CL120H430, Evoke and Quadro Heated Towel Rail, Quadro Heated Towel Rail, Heated Towel Rail, Towel Rail, Rail
---|---

References

• newtech.co

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>