SoundPEATS Tipo-C True Wireless Earbuds User Manual

: June 3, 2024
: SoundPEATS

Table of Contents

SoundPEATS Tipo-C True Wireless Earbuds
First Time of Using
Reset
Product Diagram
Control
What does the Indicator on the charging
FCC Statement
IC ID
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SoundPEATS Tipo-C True Wireless Earbuds

First Time of Using

SoundPEATS-Tipo-C-True-Wireless-Earbuds-
FIG-1

0pen the charging case lld and take out both earbuds. Two earbuds will turn on and enter pairing mode.
When the earbuds pair successfully, the red and white lights on the main earbud will flash alternately, the white light on the secondary earbud will stay on. Now you can connect the eorbuds to your device.
Actlvate the Bluetooth on your device and choose “SOUNDPEATS Free2 classic11 to connect

Reset

Open the case lid, make sure both earbudsore charging (the red lights on earbuds stay on). Press and hold the MFBs on both earbuds for lO seconds until the red and white lights flash twice alternately, reset complete.

Wearing

ldentify the left and right earbuds.
Rotate earbuds and find the most comfortable position.

Product Diagram

SoundPEATS-Tipo-C-True-Wireless-Earbuds-
FIG-4

Control

Power On| Auto: Open the case lid and take out both earbuds

Manually: Press and hold the MFB for l .Ss

---|---
Power Off| Auto: Place back Into charging case

Manually: Press and hold the MFB for 1 Os

What does the Indicator on the charging

case tell?
When charging the charging case, the indicator light shows:

Charging: blue light flashes
Fully charged: blue light stays on

How lo charge the charging case?

Use a Type-C adapter to charge the case (current no more than l A).
Pleose charge the earbuds and charging case at least once per 3 months when not In use for a long time.

Why are the earbuds still connecting to my phone alter placing them back and closing the case lid?

The charging case has no remaining power. Placing the eorbuds back into the charging case can’t turn them off if the case battery is dead.
Please make sure the earbuds are correctty placed In the charging case, and make sure the charging contactors ore clean. Please try to clean the places between the charging case and the earbuds with something like a microfiber cloth.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to interlerence in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference TO roaio Communiconons. Owever, nere is no gudrcnree tnar intererence WT nor OCur ina Pdncurar nstalation. lf this equipment does cause harmful interference fo radio or television reception, which can be determined by furning the equipment off and on, fhe user is encouraged to fry fo correct the interference vone or mora ot fnllowinmacsiires

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority fo operate the equipment.

IC ID

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject fo the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference thatmay cause undesired operation of the device.”