SOLARIS Vision BLSA3 Baby Lock User Guide
- October 27, 2023
- SOLARIS
Table of Contents
- Wireless Network Connection Functions
- Wireless Network Connection
- Winding the Bobbin
- Setting the Bobbin
- Upper Threading
- Preparing to Embroider
- Care and Maintenance
- Cleaning the Race
- Viewing Manuals and Videos on Machine
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SOLARIS Vision BLSA3 Baby Lock User Guide
Refer to the Instruction and Reference Guide for detailed instructions.
In this guide, English screens are used for basic explanations.
For details on the built-in embroidery patterns, refer to the Embroidery
Design Guide.
Wireless Network Connection Functions
Operations Available with a Wireless Network Connection
This machine supports a wireless network connection. The following useful operations will be available if the machine is connected to a wireless network.
For upgrading
Directly download the update file to the machine.
For embroidering
Memo
For details on each function, refer to the Instruction and Reference Guide (Embroidery).
Conveniently check the operating status of the machine from your smart device by using the dedicated mobile application (IQ Intuition- Monitoring).
Transfer an image from the smart device to the machine to create a design in IQ Designer by using the dedicated mobile application (IQ Intuition- Positioning).
Wirelessly transfer an embroidery pattern from your computer to the machine by
using the dedicated Windows application (Design Database Transfer).
The application can be downloaded from the following URL.
https://www.babylock.com/accessories/software/design-database-transfer
Settings must be specified in
Design Database Transfer. For more information, refer to the manual for Design
Database Transfer.
Wirelessly transfer to the machine an embroidery pattern edited with
embroidery editing software (Palette version 11 or later) on a computer. Also,
transfer to Palette an embroidery pattern edited on the machine.
Settings must be specified in Palette. For more information, refer to the
manual for Palette.
Wireless Network Connection
When you first turn on the machine, the following message about a wireless LAN
connection appears.
To set up a connection, touch , and then continue with step 5.
Winding the Bobbin
Follow the numbered steps in the following sections in order. Refer to the Instruction and Reference Guide for detailed instructions.
Use the plastic bobbin that comes with this machine or bobbins of the same
type.
Bobbin included with the machine is Class 15 type bobbin.
Using the Supplemental Spool Pin
You can wind the bobbin during sewing.
Using the Spool Pin
You can use the main spool pin to wind the bobbin before sewing.
Setting the Bobbin
Refer to the Instruction and Reference Guide for detailed instructions.
Upper Threading
Preparing to Embroider
Care and Maintenance
CAUTION
Be sure to unplug the machine before cleaning it. Otherwise, injury may
result.
Restrictions on oiling
In order to prevent damaging this machine, it must not be oiled by the user. This machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodic oiling unnecessary.
If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized Baby Lock retailer
Precautions on storing the machine
Do not store the machine in any of the locations described below, otherwise damage to the machine may result, for example, rust caused by condensation.
- Exposed to extremely high temperatures
- Exposed to extremely low temperatures
- Exposed to extreme temperature changes
- Exposed to high humidity or steam
- Near a flame, heater or air conditioner
- Outdoors or exposed to direct sunlight
- Exposed to extremely dusty or oily environments
Note
In order to extend the life of this machine, periodically turn it on and use
it. Storing this machine for an extended period of time without using it may
reduce its efficiency.
Cleaning the LCD Screen
If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth.
Memo
Occasionally, condensation may form on the LCD screen or it may become fogged
up; however, this is not a malfunction. After a while, the cloudiness will
disappear.
Cleaning the Machine Casing
When wiping dirt off the machine, firmly wring a soft cloth soaked in (lukewarm) water. After cleaning the machine, dry it with a soft, dry cloth.
TROUBLESHOOTING
| Problem | Cause | Solution |
|---|---|---|
| Machine does not operate. | All keys and buttons have been locked by . | Touch |
to unlock all keys and buttons.
Nothing appears in the LCD| Main power switch is not turned on| Turn the main
power to ON.
The plug of the power cord is not inserted into an electrical outlet.| Insert
the plug of the power cord into an electrical outlet
Nothing happens, even if the LCD display is touched.| The screen has been
locked.| Touch either of the following keys to unlock the screen.
Cleaning the Race
CAUTION
Be sure to unplug the machine before cleaning it. Otherwise, electric shock or
injury may result.
Viewing Manuals and Videos on Machine
FOR THE LOVE OF SEWING
To register your machine warranty and receive Baby Lock product updates and offers, go to babylock.com/login. If you have questions with registration, visit your Authorized Baby Lock Retailer.
Baby Lock Consumer Helpline: 800-313-4110
Brought to You by Tacony Corporation’.