Shenzhen Topway Technology KN300 Wireless Repeater User Guide

Shenzhen Topway Technology KN300 Wireless Repeater

Introduction

Brief Introduction
KN300 is a wireless repeater specially designed for large houses by HongYu Technology Co., Ltd. It works in the 2.4GHz frequency band and provides a wireless rate of up to 300Mbps. It is your first choice for enhancing wireless signals and enjoying high-speed WiFi.

Features

•  Working at 2.4GHz, compatible with 11b/g/n mode, the highest rate can reach 300Mbps;
• The page can be configured to repeater to extend the main WiFi signal, and the configuration is simple;
•  Indicators visualize the Extend effect.
•  Provide Power, Ethernet, Repeater and Wi-Fi LED.

Appearance

LED
Corresponding to Power LED, LAN LED, Repeater LED, Wi-Fi LED lights from top to bottom.

Button

WPS button on the front Rset button on the side After pressing and holding the Reset button for more than 5 seconds, when the Repeater LED blink quickly, the repeater will be restored to the factory settings. At this time, you can release the button and the repeater will automatically reboot.  Press the WPS button, and then press the WPS button of the main router, the repeater will automatically connect to the main router via WPS. After the connection is successful, the repeater LED will be on.

Use your mobile phone to configure repeater

Repeater settings

Step 1
Plug the repeater into the power socket and wait for the WiFi LED to blink and the repeater is started.

Step 2
Use your mobile phone to search for and connect to the wireless network of the repeater: KN300_XXXXXX.

Step 3
After a while, the phone will automatically jump to the management page of the repeater; if not, please open the browser and enter “192.168.19.1” in the address bar to log in manually.

Step 4
After entering the management page, we click [START] to configure.

Step 5
After the repeater automatically searches for the surrounding WiFi, select the wireless network that needs to be extended. Such as HYLink_MK600_2.4G.

Tips:
If the WiFi Name of the router to be extended is not in the list, please click [Refresh].

Step 6
If the WiFi to be extended is encrypted, please enter its wireless password. You can check [Set Repeater WiFi] to modify the wireless name of the repeater and set the password of the repeater. If not checked, the name and password of the repeater will be the same as the main WiFi. After inputting, click [Next].

• Scenario 1: Uncheck [Set Repeater WiFi]
• Scenario 2: Check [Set Repeater WiFi]

Step 7
The preview page after the setting is completed can help you confirm the previous input content. If the confirmation is correct, click [Finish Settings] to apply setting. If the Repeater LED light on, it means the extend is successful.

Complete Exit the browser, connect to the wireless name of the repeater, enter the wireless password, and you can go online.

•  The wireless name and password of the repeater: set in Step 6, if not set, it is same with the extended main WiFi.
•  If you need to configure the Repeater again, please reset the repeater to the factory setting, and then configure it according to the first configuration method.

Set up a repeater using a PC

First Repeater settings

Step 1
Plug the repeater into the power outlet and wait for the WiFi indicator to blink and the repeater is started.
Step 2
Use a PC to search for and connect to the wireless network of the repeater: KN300_XXXXXX.

Step 3
Open the browser and enter “192.168.19.1” in the address bar to log in manually.

Step 4
After entering the management page, we click [Repeater] to configure.

Step 5
After the repeater automatically searches for the surrounding WiFi, select the wireless network that needs to be extended. Such as HYLink_MK600_2.4G.

Tips
If the name of the router to be Extended is not in the list, please click [Refresh].

Step 6
If the wireless WiFi to be extended is encrypted, please enter its wireless password. You can check [Set Repeater WiFi] to modify the wireless name of the repeater and set the password of the repeater. If not checked, the name and password of the repeater will be the same as the main WiFi, and then click [Apply].

• Uncheck [Set Repeater WiFi] and click [Apply], the name and password of the repeater will be the same as the main WiFi.
• Check [Set Repeater WiFi] to configure the WiFi name and password of the repeater.

Step 7
Click [Apply] to complete the setting. Wait for the repeater application to take effect. If the Repeater LED light on, it means the extend is successful. Complete Exit the browser, reconnect the wireless name of the repeater, enter the wireless password, and you can go online.

• The wireless name and password of the repeater: set in Step 6, if not check, the name and password of the repeater will be the same as the main WiFi.
• If you need to set up the repeater again, you can reset the repeater to the factory setting, and then configure it according to the first configuration method.

Log in to the repeater management page

If it is the first time to use the repeater or the repeater has been restored to its factory settings, please refer to “3.1 First Repeater Settings”; otherwise, please refer to the following steps to log in to the repeater.
Step 1
When the repeater is operating normally, use a computer to search for and connect to the repeater’s WiFi: KN300_XXXXXX。

Step 2
Set the computer’s IP address:192.168.19.2。

Step 3
Open the browser and enter “192.168.19.1” in the address bar to log in manually.

Status
After the repeater setting is completed, log in to the [Status] page of the repeater, and you can view the repeater status and running status of the extend.

Repeater
Enter the [Repeater] page, you can set the Extend again.

LAN
Enter [LAN] page, you can configure LAN information.

Wireless
Enter the [Wireless] page, you can configure the WiFi information of the repeater.

Advance
Enter the [Advance] page, you can Reboot, Reset,and Upgrade the firmware of the repeater.

FCCCaution

This devicecomplieswithpart15ofthe FCCRules.Operationis subjecttothe followingtwoconditionsThis devicemaynotcauseharmfulinterference,andthisdevicemustacceptanyinterference received,includinginterferencethatmay causeundesiredoperation.
AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliance couldvoidtheuser’sauthoritytooperate theequipment.

Note:
This equipmenthasbeentestedandfoundtocomplywiththe limitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. This equipmentgeneratesusesandcanradiateradiofrequencyenergyand, ifnot installedandusedinaccordance withthe instructions,maycauseharmfulinterference toradiocommunications. However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation. Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon, theuserisencouragedtotrytocorrecttheinterferencebyone ormoreofthe followingmeasures:

•  Reorientorrelocatethereceivingantenna.
•  Increasethe separationbetweenthe equipmentandreceiver.
• Connecttheequipmentintoanoutletona circuitdifferentfromthattowhichthe receiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

This equipmentcomplieswithFCC radiationexposurelimits setforthforan uncontrolledenvironment.This equipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator& yourbody.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>