sentien SA11 True Wireless Earphone User Guide
- June 9, 2024
- sentien
Table of Contents
sentien SA11 True Wireless Earphone
Charge
Charge the headset with the included USB-C cable. The LED light will turn from red to purple when charging is complete.
Pair
Start with your headphones off. Enter pairing mode by holding THE BUTTON (on the bottom right side) until you hear the voice prompt “power on” and beep. In the pairing mode, the LED light flashes purple and red (the right upper side)
THE FIRST BOOT
Hold THE BUTTON → (power on & beep) → pairing mode
AFTER CONNECTION
Hold THE BUTTON → (power on) → autoconnect
Double press THE BUTTON → (pairing) → pairing mode
Connect
Open your device’s Bluetooth® menu and select “SENTIEN” voice says “Connected” and the LED light will stops flashing.
LED indicators
- Solid red Charging
- Solid purple Charging complete
- Flashes red and purple Pairing mode
THE BUTTON functions
- Power ON/OFF Hold
- Enter pairing mode Double press (in powered ON/Connected mode)
Read User Manual Online (PDF format)
Loading......