BRAINZ 38587 LED Cooler Speaker User Manual
- June 4, 2024
- BRAINZ
Table of Contents
BRAINZ 38587 LED Cooler Speaker User Manual
What you need
– USB-C cable (included)
– Mobile phone with Bluetooth (not included)
How to charge the LED Cooler Speaker
The charging point can be found behind the DC5V label on the side (white flap). Connect the included USB-C cable to the speaker and connect the USB side to a power source. The speaker will now charge.
How to set it up
Screw on the bottom of the LED Cooler Speaker with a simple twist.
Press and hold the button on the side of the speaker with the ‘ -icon’ for 3 seconds to turn on the speaker. The speaker will appear under your new Bluetooth connections on your phone as Brainz S50. By clicking on it, your phone will connect and the speaker is ready for use.
Changing colours
By clicking twice on the ‘ -icon’ you can change the colour to your liking. You can choose between 11 different modes.
Switch off
Press and hold the same ‘ -icon’ on the side of the speaker for 3 seconds. A tone will follow. The speaker is now off.
You can also disconnect the speaker from the bucket. Please note that the bucket will no longer have LED lights.
Please note: Do not use a charger with a higher voltage than suitable for this product.
Please note: This product is not dishwasher safe. Clean both parts with a wet cloth.
This manual is valid for article number 38587. For more information about this product, please visit www.brainz-electronics.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>