BRAINZ 38572 Powerbar Speaker Instruction Manual
- June 3, 2024
- BRAINZ
Table of Contents
BRAINZ 38572 Powerbar Speaker
What you need
- USB-C cable (included)
- Mobile phone with Bluetooth (not included)
How to charge the Powerbar speaker
Connect the supplied cable to the speaker (DC5V port on the back of the
speaker) and connect the USB side to a power source. The speaker will now
charge.
This is how to set it up
Slide the ON/OFF button to the right on the back of the speaker to turn it on.
The speaker will appear under your new Bluetooth connections on your phone as
Brainz Speaker S65. By clicking on it, your phone connects and the speaker is
ready for use.
Volume
To increase the volume, press and hold the + button on the top of the speaker.
To decrease the volume, repeat with the – button.
Pause music
Press the pause button once to pause the music (button with triangle/ 2
dashes). Repeat to resume music.
Next/ previous song
Press the + button once to go to the next track. Repeat with the – button to
go to the previous track.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the
other end into the speakers AUX port. The speaker will now automatically
switch to AUX and disable Bluetooth. The AUX port is found on the back of the
speaker under the ON/OFF button.
USB
Thanks to the USB access port, you can play MP3 files. To do this, insert a
USB into the access port. This access port is also found on the back of the
speaker.
SD
Thanks to the SD access port, you can play MP3 files. To do this, insert an SD
card into the access port. This access port is also found on the back of the
speaker.
Switch off
Slide the switch button on the back of the speaker to the left to turn it off.
Please note: Do not use a charger with a higher voltage than suitable for
this product.
Please note: This item is not dishwasher safe. Clean with a wet cloth.
These instructions apply to article numbers 38572 & 38573.
For more information about this product, please visit www.brainz-
electronics.nl