KICKER KSS269 2-Way Component Speakers System Owner’s Manual
- June 3, 2024
- KICKER
Table of Contents
KICKER KSS269 2-Way Component Speakers System
IMPORTANT SAFETY WARNING
PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN A DISTORTED, CLIPPED OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE.
KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! TURNING UP A SYSTEM TO A LEVEL THAT HAS AUDIBLE DISTORTION IS MORE DAMAGING TO YOUR EARS THAN LISTENING TO AN UNDISTORTED SYSTEM AT THE SAME VOLUME LEVEL. THE THRESHOLD OF PAIN IS ALWAYS AN INDICATOR THAT THE SOUND LEVEL IS TOO LOUD AND MAY PERMANENTLY DAMAGE YOUR HEARING. PLEASE USE COMMON SENSE WHEN CONTROLLING VOLUME.
The KICKER KS speakers offer an excellent upgrade to your vehicle’s factory sound system, delivering great full-range sound at an amazing value! Whether dropping the KS speakers in a factory location or customizing your install, their high-efficiency design means less power is needed to play your music, while our use of advanced materials and construction techniques ensures optimal performance for years to come. Designed for versatile applications without sacrificing sound quality or aesthetics, we hope you have the chance to combine these new, upgraded audiophile components with our all-new KEY Smart Amplifiers and a KICKER sub for an audio experience you won’t forget!
Specifications
KS Component Speakers KSS269
- Woofer [in, mm] 6×9, 160×230
- Midrange/Tweeter [in, mm] 2.75, 70
- Rated Impedance [Ω] 4
- Peak Power Handling [ Watts] 200
- Recommended Amplifier Power [Watts RMS] 15-100
- Sensitivity [1W, 1m] 92
- Frequency Response [Hz] 30-20k
- Midrange/Tweeter Magnet Material Ferite
- Midrange/Tweeter Cone Material Composite Paper (Treated Paper)
- Midrange/Tweeter Surround Material UV Treated Cloth
- Woofer Cone Material Polyproplene
- Woofer Surround Material Santoprene
- Woofer Mounting Hole Diameter [in, mm] 5-11/16×8-7/16
- Woofer Top Mount Depth [in, mm] 2-15/16, 75
- Woofer Bottom Mount Depth [in, mm] 3-3/16, 81
- Midrange/Tweeter Mounting Hole Diameter [in, mm] 2-3/8, 61
- Midrange/Tweeter Top Mount Depth [in, mm] 1-1/4, 32
- Midrange/Tweeter Bottom Mount Depth [in, mm] 1-3/8, 35
Note: All specifications and performance figures are subject to change. Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER speakers, we recommend using genuine KICKER accessories and wiring. Please allow two weeks of break-in time for the speakers to reach optimum performance
Installation
Crossover & Wiring Configuration
We recommend using 16 gauge (or larger) wire. The KS Speakers are rated at 4
ohms and work with any source unit or amplifier designed to operate at a 4 ohm
load. Make sure your source unit or amplifier is rated for 4 ohm operation.
Crossover Wiring
One component set per channel At least two amplifier channels are needed for
stereo operation
Pro Tip: You’re a KICKER KX amplifier and a few cables away from a full system upgrade that will dominate any factory system! KICKER line of amplifiers make it easy to upgrade to solid bass with your existing or stock source unit. Also, ask your dealer about KICKER Subwoofer upgrades.
Crossover Wiring
Two component sets per channel At least two amplifier channels are needed for
stereo operation (only one channel is shown)
Requires two complete KSS systems (four woofers, four tweeters, four crossovers)
Crossover Mounting
Mount the crossover in a location that is easy to access for wiring. Make sure
that the crossover will not be exposed to water. The bottom of the car door is
not a good location. If you must mount the crossover in the car door, exercise
caution as water can accumulate in the bottom of the door. Keep the crossover
high in the door and shielded from water
If factory speaker wiring is not available in your desired location, it may be necessary to run speaker wire through the door jamb. The speaker wire should be kept away from sharp edges and avoid the possibility of getting pinched by the door. An existing grommet in the door jamb is the ideal place to run the speaker wire. If the factory hole and grommet do not exist or are inaccessible, you must drill a hole to run the speaker wire through the door jamb. Be careful not to drill into other wiring or existing door mechanisms. Any time a wire is run through a hole, it is necessary to insert a rubber or plastic grommet to protect the wire from damage.
Speaker Mounting
The KICKER KS Speakers are designed for free-air applications and do not
require a sealed enclosure for optimum performance. It is important to isolate
the sound coming from the front of the speaker from the sound radiating from
the back of the speaker.
This is most easily accomplished by mounting the speakers in a vehicle’s factory locations or in a location with a semi-isolated rear chamber (like the rear deck of a car behind the rear seats). If you are replacing factory speakers in their original locations, you may need to use the included multipurpose adapter, or modify it as such that it will fit your required screw patterns. You may also need to enlarge the speaker cut-outs and pre- drill new screw holes using a 7/64” (2.5mm) bit.
Custom mounting locations will require more preparation and work. Make sure that the speaker will not interfere with trunk and door opening and closing mechanisms and that the enclosed screws will not puncture the fuel tank, puncture wiring, or interfere with any other mechanical parts on the underside of the mounting surface. Cycle the windows all the way down and up. If the speaker cut-out locations require you to cut metal, avoid structural metal and braces. If the door body and panel cannot support the weight of the speaker, an optional reinforcing ring (thin piece of wood or Medium Density Fiberboard) may be fastened or adhered to the door body The multi-bracket adapter will help accommodate the KSS speakers in factory or custom locations. You may need to cut off parts or otherwise modify the adapter to fit your vehicle or application.
KS69 ADAPTER
Secure speaker to desired location
Midrange/Tweeter Mounting
The midrange/tweeter is flush-mounted and may be installed using one of the included adapters: Toyota/ Subaru, Chrysler/Jeep, GM/Mopar. Choose a fla location on the panel with space behind the panel to allow room for the motor structure, and tweeter. After checking the clearances, cut a 1-3/4” (44mm) diameter mounting hole in the panel. If using an adapter, place the adapter against the surface. Feed the wire through the adapter and the hole in the panel. Secure the driver by screwing the supplied screws onto the tweeter.
Warranty
When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material an workmanship under normal use for a period of TWO (2) YEARS from date of original purchase with receipt. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from the date of original purchase. In all cases you must have the original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, KICKER will repair or replace (at its discretion) the defective merchandise with equivalent merchandise. Warranty replacements may have cosmetic scratches and blemishes. Discontinued products may be replaced with more current equivalent products. This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore, these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE:
Defective merchandise should be returned to your local Authorized Stillwater
Designs (KICKER) Dealer for warranty service. Assistance in locating an
Authorized Dealer can be found at www.KICKER.com or
by contacting Stillwater Designs directly. You can confirm that a dealer is
authorized by asking to see a current authorized dealer window decal.
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (KICKER), call the KICKER Customer Service Department at 405-624-8510 for a Return Merchandise Authorization (RMA) number. Package only the defective items in a package that will prevent shipping damage, and return to:
Stillwater Designs 3100 North Husband St Stillwater, OK 74075 The RMA number must be clearly marked on the outside of the package. Please return only defective components. The return of functioning items increases your return freight charges. Nondefective items will be returned freight collect to you. For example, if a subwoofer is defective, only return the defective subwoofer, notthe entire enclosure. Include a copy of the original receipt with the purchase date clearly visible, and a “proof-of-purchase” statement listing the Customer’s name, Dealer’s name and invoice number, and product purchased. Warranty expiration on items without proof-ofpurchase will be determined from the type of sale and manufacturing date code. Freight must be prepaid; items sent freight-collect, or COD, will be refused.
WHAT IS NOT COVERED?
This warranty is valid only if the product is used for the purpose for which
it was designed. It does not cover
- Damage due to improper installation
- Subsequent damage to other components
- Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation
- Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be considered abuse
- Any cost or expense related to the removal or reinstallation of product
- Speakers damaged due to amplifier clipping or distortion
- Items previously repaired or modified by any unauthorized repair facility
- Return shipping on non-defective items
- Products with tampered or missing barcode labels
- Products with tampered or missing serial numbers
- Products returned without a Return Merchandise Authorization (RMA) number
- Products purchased from an UNAUTHORIZED dealer
- Freight Damage
- The cost of shipping product to KICKER
- Service performed by anyone other than KICKER
HOW LONG WILL IT TAKE?
KICKER strives to maintain a goal of one-week service for all acoustics
(subwoofers, midrange drivers, tweeters, crossovers, etc)returns. Delays may
be incurred if lack of replacement inventory or parts is encountered. Failure
to follow these steps may void your warranty. Any questions can be directed to
the KICKER Customer Service Department at
405-624-8510. Contact your
International KICKER dealer or distributor concerning specific procedures for
your country’s warranty policies
Garantie
Contact your International KICKER dealer or distributor concerning specific procedures for your country’s warranty policies. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
P.O. Box 459 Stillwater, Oklahoma 74076 USA (405) 624–8510