KICKER 51PSC652 Coaxial Speakers Owner’s Manual
- June 1, 2024
- KICKER
Table of Contents
KICKER 51PSC652 Coaxial Speakers
Specifications
- Woofer Size: 6.5 inches [165 mm]
- Tweeter Size: 0.5 inches [12.7 mm]
- Frequency Response: 15.2 Hz
- Max Recommended Amplifier Power: 5 Watts Peak / 2 Watts RMS
- Sensitivity: 92.5 dB @ 1W, 1m
- Nominal Impedance: 4 ohms
- Weight: 15.2 oz [430 g]
- Mounting Hole Diameter: 5 1/16 inches [128 mm]
- Mounting Depth: 2 inches [50 mm]
- Top Mount Height: 1/4 inch [6.5 mm]
Installation
- Remove your motorcycle’s instrument panel according to the manufacturer’s service manual.
- Remove factory speakers by unscrewing and disconnecting the speaker connectors.
- Install the PSC65 speakers in the factory location by connecting the factory speaker connectors to the PSC65 terminals and securing the speakers with proper gaskets and hardware.
- Reinstall your bike’s access panel in the reverse order you disassembled it.
PSC65 COAXIAL SPEAKERS
Owner’s Manual
- Authorized KICKER Dealer:
- Purchase Date:
- Serial Number:
PERFORMANCE
- Woofer Size | in [mm] 6 1/2 [160]
- Tweeter Size | in [mm] 3/4 [20]
- Frequency Response | Hz 40–20k
- Max Recommended Amplifier Power [Watts] | PEAK/RMS 120W/60W
- Sensitivity [SPLo] | dB @ 1W, 1m 92.5
- Nominal Impedance [Zn] | ohm 2Ω (PSC652), 4Ω (PSC654)
- Weight | oz [g] 15.2 [430]
- Mounting Hole Diameter | in [mm] 5 1/16 [128]
- Mounting Depth | in [mm] 2 [50]
- Top Mount Height | in [mm] 1/4 [6.5]
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing. Please use common sense when controlling volume.
Package Contents
- (2) PSC65 Speakers
- (8) M4 x 25mm pan cross head woodscrews
- (2) Grilles
- (2) 12” wiring harnesses
- (4) 22ga, red crimp-style butt connectors
- (2) KICKER badges
INSTALLATION
Please refer to your bike’s factory service manual for disassembly/installation information. Typically, you should retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The KICKER PSC65 is compatible with factory locations using the included gaskets. If you are doing a custom installation, be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely mounting the speakers. Use the included grilles and screws only when performing a custom installation.
- Remove your motorcycle’s instrument panel according to the manufacturer’s service manual.
- Remove factory speakers.
- Remove the screws securing the factory speakers.
- Remove the speaker connectors while removing the factory speaker.
- NOTE: 2014 Harley Davidson – It is necessary to remove the outer fairing and speaker housings.
- Install PSC65 in factory location.
Connect the factory speaker connectors to the PSC65 terminals.
Mount the PSC65 to the desired location with the proper gasket and secure using the factory hardware. Re-install your bike’s access panel in the reverse order you disassembled it.
ACOUSTICS LIMITED WARRANTY
When purchased from an Authorized KICKER Dealer, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from date of original purchase. In all cases you must have the original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, KICKER will repair or replace (at its discretion) the defective merchandise with equivalent merchandise. Warranty replacements may have cosmetic scratches and blemishes. Discontinued products may be replaced with more current equivalent products. This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore, these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE:
-
Defective merchandise should be returned to your local Authorized Stillwater Designs (KICKER) Dealer for warranty service. Assistance in locating an Authorized Dealer can be found at www.kicker.com or
by contacting Stillwater Designs directly. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal. -
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (KICKER), call the KICKER Customer Service Department at 405-624-8510 for a Return Merchandise Authorization (RMA) number. Package only the defective items in a package that will prevent shipping damage, and return to:
Stillwater Designs, 3100 North Husband St, Stillwater, OK 74075 -
The RMA number must be clearly marked on the outside of the package. Please return only defective component systems. The return of functioning items increases your return freight charges. Non-defective items will be returned freightcollect to you. For example, if a subwoofer is defective, only return the defective subwoofer, not the entire enclosure. Include a copy of the original receipt with the purchase date clearly visible, and a “proof-of-purchase” statement listing the Customer’s name, Dealer’s name and invoice number, and product purchased. Warranty expiration on items without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must be prepaid; items sent freight-collect, or COD, will be refused.
WHAT IS NOT COVERED?
This warranty is valid only if the product is used for the purpose for which
it was designed. It does not cover:
-
Damage due to improper installation
-
Subsequent damage to other components
-
Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation
-
Damage through negligence, misuse, accident or abuse.
Repeated returns for the same damage may be considered abuse -
Any cost or expense related to the removal or reinstallation of product
-
Speakers damaged due to amplifier clipping or distortion
-
Items previously repaired or modified by any unauthorized repair facility
-
Return shipping on non-defective items
-
Products with tampered or missing barcode labels
-
Products with tampered or missing serial numbers
-
Products returned without a Return Merchandise Authorization (RMA) number
-
Products purchased from an UNAUTHORIZED dealer
-
Freight Damage
-
The cost of shipping product to KICKER
-
Service performed by anyone other than KICKER
NOTE: All specifications and performance figures are subject to change. Please visit the www.kicker.com for the most current information.
HOW LONG WILL IT TAKE?
KICKER strives to maintain a goal of one-week service for all acoustics
(subwoofers, midrange drivers, tweeters, crossovers, etc) returns. Delays may
be incurred if lack of replacement inventory or parts is encountered. Failure
to follow these steps may void your warranty. Any questions can be directed to
the KICKER Customer Service Department at
405-624-8510. Contact your
International KICKER dealer or distributor concerning specific procedures for
your country’s warranty policies.
INTERNATIONAL WARRANTY
Contact your International KICKER dealer or distributor concerning specific
procedures for your country’s warranty policies.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
©2015 Stillwater Designs