PEAK SURGE Power Supply Instruction Manual
- June 4, 2024
- PEAK
Table of Contents
Power Supply
Instruction Manual
UNLEASH THE SURGE
This tattoo power supply delivers limitless power in a uniquely compact size.
PEAK SURGE DIAGRAM
TECHNICAL SPECIFICATIONS
| Dimensions: 3.25” x 3.25” x 1” | Input Current: 3.42A |
|---|---|
| Input Voltage: 100v–240v | Peak Current: 4A |
| Output Voltage: 1.5v–18v | Continuous Current: 2A |
KEY FEATURES
- Durable aluminum body
- Works with the Peak Radix footswitch + standard wired footswitches
- LED rim lighting; changes color with voltage adjustments
- 2 RCA inputs; can plug into 2 machines
- Jumpstart voltage: 10V in 0.2 seconds
- Full TFT color screen
- Clear, easy-to-read interface with session timer
- Built-in magnets affix to any ferrous metal surface
- Lightweight and compact; ideal for travel
- Easy to wrap, protect, and keep clean
HOW TO USE YOUR PEAK SURGE
CONNECTING TO TATTOO MACHINES
Use an RCA cord to connect your machine to the Surge power supply.
Adjust your voltage using the – and + arrows on the touchscreen interface
(LED rim lighting will change color with voltage adjustments)
Short press the start/pause button to start/pause tattooing. Long press
the button to start/pause the timer.
Activate/turn off the jumpstart feature by holding the and buttons for 2
seconds. A lightning bolt will appear on your screen.
Tattoo machines operate independently. Select the or buttons to shift
between machines.
Your Peak Surge will power off automatically after 5 minutes of no activity.
PAIRING TO THE RADIX WIRELESS FOOTSWITCH
- Press your Radix footswitch down, then rapidly double-press the button on the bottom of your Radix power supply to turn it on. A slow blinking red light will indicate your Radix is ready for pairing.
- Press and hold the +/- buttons on your Surge power supply. Wait until the display screen shows “LN.”
- Press your Radix footswitch down and hold the button on the bottom of the footswitch to turn off and complete the pairing.
- When your Radix has successfully paired with your Surge, you will hear a beeping sound. The screen of your surge power supply will then return to the home screen.
- To turn your Radix footswitch back on, press down and hold the button on the bottom of your Radix.
UNPAIRING THE RADIX WIRELESS FOOTSWITCH
- Make sure your Radix footswitch is on, then press and hold the +/- buttons on your Surge power supply. Wait until the display screen shows “AF”
- Press the power button on your Surge. The screen will say “CL.”
- Once unpaired, the screen of your Surge power supply will return to the home screen.
LED COLOR KEY
WARRANTY INFORMATION
If you experience any technical issues or your Peak Surge power supply requires repairs, please contact our customer service team at 410-712-0145. After our customer service team provides you with a return authorization, you can download and fill out our Peak Repair Order Form:
Mail your completed repair order form, battery pack, and invoice as proof of purchase to 7410 Coca-Cola Dr. STE 108, Hanover, MD 21076. You can also direct any questions or concerns regarding issues with your Peak Surgepower supply to info@peakneedles.com. If you purchased your Surge less than a year ago, we will replace it with a brand new model. If your item is older than a year, it is unfortunately no longer protected under our one-year warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>