RUNZE FLUID RZ1030B Peristaltic Pump Instruction Manual
- June 3, 2024
- RUNZE FLUID
Table of Contents
RUNZE FLUID RZ1030B Peristaltic Pump
Product Introduction
Product Characteristics
- PPS Housing, excellent structural performance, moderate 4 rotor pulse
- With flexible upper pressure block, self-adapting to different hoses, easy to change the tube
- Mainly used for medical devices and various small flow liquid transfer analysis instruments
- OEM support
- Outlet pressure at 0.2-0.3 MPa, Hydraulic head (pressured water approx. 20m)
- Suction range = atmospheric pressure (standard 10.33m) – cavitation margin of the pump – inlet tube loss – safety margin (0.5) – cavitation pressure of the medium
External and Mounting Dimensions (Unit: mm)
Pump Head External and Mounting Dimension
Pump External and Mounting Dimension
Technical Parameters of Peristaltic Pump
Flow Curve Chart
Model **RZ1030B**
WT (mm)| 0.8
ID (mm)| 0.64| 0.76| 0.89| 1.02| 1.14| 1.30| 1.42| 1.52| 1.65| 1.85| 2.06|
2.29| 2.54| 2.79
Max Flow Rate
（ml/min）
| ****
12
| ****
15
| ****
18
| ****
25
| ****
32
| ****
38
| ****
47
| ****
50
| ****
56
| ****
70
| ****
87
| ****
94
| ****
113
| ****
128
WT (mm)| 1.0
ID (mm)| 1.0| 2.0| 3..0
Max Flow Rate
（ml/min）
| ****
24
| ****
74
| ****
183
RZ1030B Maximum Reference Flow Curve for 0.8mm WT Pump Tube
Flow Model
RPM
| ****
Pharmed BPT- 0279-008
---|---
1rpm| 1 ml/min
50rpm| 18 ml/min
100rpm| 33 ml/min
150rpm| 46 ml/min
200rpm| 63 ml/min
250rpm| 79 ml/min
300rpm| 93 ml/min
350rpm| 109 ml/min
400rpm| 128 ml/min
RZ1030B Maximum Reference Flow Curve for 1.0 mm WT Pump Tube
Model
Flow
RPM
| ****
Pharmed BPT0279-008
---|---
1rpm| 1 ml/min
50rpm| 23 ml/min
100rpm| 46 ml/min
150rpm| 70 ml/min
200rpm| 94 ml/min
250rpm| 119 ml/min
300rpm| 141 ml/min
350rpm| 165 ml/min
400rpm| 183 ml/min
Motor Parameters
Motor Features
| Description | Parameters |
|---|---|
| Rated Voltage | 24V |
| Rated Current | 1.1A |
| Maximum Output Power | 10.1W |
| Motor Step Angle° | 1.8° |
| Angle Error | 1.8°±0.09° |
| Input Impedance | 4.2Ω±0.42Ω |
| Operating Temperature | -10℃~+50℃ |
| Motor Weight | 350g |
Motor Wiring
| Properties | Wiring color |
|---|---|
| A+ | RED |
| A- | YELLOW |
| B+ | BLUE |
| B- | ORGANGE |
Motor Reliability
| No. | Test Project | Test Conditions | Reference Specification |
|---|---|---|---|
| 1 | Low temperature setting |
(cold resistance)
| Temperature: -40℃±3℃
Test time: 96h
| JIS C 60068-2-1
2| High temperature setting
(heat resistance)
| Temperature: 85℃±2℃
Test time: 96h
| JIS C 60068-2-2
3
| High temperature and high humidity setting
(humidity resistance)
| Temperature: 60℃±2℃ (40℃±2℃) Humidity: 93%+2/-3%
Test time: 96h
| ****
JIS C 60068-2-3
4
| ****
Hot and cold operation (temperature change)
| Temperature: low temperature test -40℃±3℃1h (Temperature change time: within 5min)
High temperature test: 85%±2℃ 1h
Cycle index: 25 times
| ****
JIS C 60068-2-14
5
| ****
Vibration
| Range of vibration number: 10Hz~55Hz~10Hz Amplitude: 1.5mm]
Vibrating direction: X.Y.Z
Time: 2h in each direction
| ****
JIS C 60068-2-6
6
| ****
Dropping
| 981 acceleration m/s² sine half wave Action time: 6ms
Falling direction: ±X, ±Y, ±Z
Number of falling rounds: 3 rounds each
| ****
JIS C 60068-2-27
Motor Dimension
Hose Assembly
Tip: The hose can be greased with a certain amount of grease to prolong its service life
- Step 1 Open the spring lock
- Step 2 Open the upper-pressure block
- Step 3 Install the pump hose, and keep fittings on the two ends of the hose stuck to the pump head
- Step 4 Close the upper-pressure block
- Step 5 Installation complete
Technical Service
- Tel: +86-25-51197362
- Fax: +86-25-51197362
- Phone: +86-138 5195 4068
- Technical support: +86-183 5195 5944, +86-198 2581 4316
- Official URL http://www.runzeflulid.com
- Alibaba Store URL https://runzeliuti.en.alibaba.com
- Sales Email : [email protected]
- Address NO.9 Tianxing West Road, Dongshan Street, Jiangning District, Nanjing, Jiangsu, China
- www.runzeliuti.com