Lightspeed Activate Audio Solutions User Guide
- June 3, 2024
- lightspeed
Table of Contents
Activate Audio Solutions
User Guide
GETTING STARTED WITH ACTIVATE
Get the Activate App
Activate Pods can be controlled by the teacher microphone or the Lightspeed
Activate App which can be downloaded from the iOS App Store or Google Play
Store:
https://apps.apple.com/us/app/lightspeed-activate/id1217892850
https://play.google.com/store/apps/details?id=com.lightspeed_tek.activate&hl=en_US&gl=US
When using the app, refer to the app tutorial. When using the microphone, see
the reverse side.
USING YOUR MICROPHONE TO CONTROL ACTIVATE
| Action| Response| Description
---|---|---|---
CLASS MODE| | |
Whole class instruction| Tap the mode button| Button lights blue| Teacher can
address the entire classroom through the classroom speaker
Adjust microphone volume| Up/down arrows| Volume changes in class speaker|
Turn the microphone volume up or down
POD MODE| | |
Listen to small groups| Tap the mode button| Button lights white| Teacher can
toggle through pods to listen to small groups
Select pods| Up/down arrows| Selected pod number sounds in earbud| Jump from
pod to pod listening to different groups
Talk to pods / listen to pods| Double Tap mode button (toggle
between listen/talk)| Voice response in earbud| Talk to individual groups
Double tap again to just listen
Pod to class (student sharing)| Press and hold up arrow| Voice response in
earbud| Individual pods broadcast through the class speaker for student
sharing
Student sharing pod selection| Up/down arrows| Voice response in earbud| Use
the up/down arrows to allow other groups to share out
POD CALL BUTTON
- Each pod has a call button for students when they need assistance.
- When the button is pressed, the teacher will hear a tone in their earbud describing which pod is calling.
- If the pod is not selected, the message will call one more time.
RETURN THE COMPONENTS TO THE ACTIVATE STATION FOR NIGHTLY RECHARGING
- Place all components in their respective charging slots
- Charging lights will light: red = charging; green = fully charged.
- The units will fully charge overnight.
For
complete operating instructions, go to www.lightspeed-tek.com/ACN-usermanual (or scan the barcode).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>