lightspeed 955 Access Instructional Audio System User Guide
- June 6, 2024
- lightspeed
Table of Contents
Quick Start Guide
995 Access
Instructional Audio System
CONNECT POWER TO THE 955 ACCESS
Connect the power supply to 955 Access and plug the cord into an AC outlet.
955 Access will power on and the power light will glow.
USING THE FLEXMIKE
Remove the microphone from the charger. Press the mute button to unmute, hold near your mouth and begin speaking.
USING THE SHAREMIKE
Remove the microphone from the charger and press the mute button to begin speaking.
CHARGE MICROPHONES NIGHTLY
Place the microphones into the cradle charger. The power status light will glow red when it is charging. It takes about 5-6 hours to fully charge the microphone battery.
When charging is complete, the power status light will glow green.
USING A WIRELESS AUDIO LINK
You can connect your 2nd microphone to your computer’s USB port to enable a
wireless 2-way audio link.
SEND AUDIO FROM THE COMPUTER to the 955 Access to ensure all audio from
the computer (videos, video conferencing, audiobooks, music, etc) can be
played through the Lightspeed 955 system and speakers.
SEND AUDIO TO THE COMPUTER from the 955 Access to ensure the teacher’s
Flexmike and any student microphones are clearly picked up by a video
conferencing solution.
Connect the microphone to your computer using a USB-C cable. Open your computer sound settings to select FlexmikeAudio as the microphone and speaker.
USB cable sold separately. Lightspeed offers a USB-A to USB-C cable for sale (part #USBC)
PAIRING MICROPHONES TO 955 ACCESS
Your system is shipped with microphones and base units pre-paired for quick and easy use. If you ever need to pair new components, follow this pairing process:
-
With a paperclip, push the register button on the back of 955 Access.
-
From a powered-off state, press and hold the power button for five seconds until the mic 1 and mic 2 lights start flashing, then release the button and let the pairing process finish.
-
The ”status” light on 955 Access will light up indicating the pairing process is complete. The mic 1 or mic 2 light on the microphone will stay illuminated.
http://www.lightspeed-tek.com/955N-usermanual
QS0621US01-1
Documents / Resources
|
lightspeed 955 Access Instructional Audio
System
[pdf] User Guide
955 Access, Instructional Audio System
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>