WOOX R6113 Smart Plug User Guide
- June 4, 2024
- woox
Table of Contents
R6113 Smart Plug
User Guide
**Quick Start Guide
** Specification
Voltage: 220-240V~50Hz
Nominal voltage: 230VAC
Max. load: 16A/3680W
Weight: 82g
Dimensions: 55x55x81.6mm
Operating temperature: -10 ~ 45
Operating humidity: 95%RH
Wireless connection: 802.11 b/g/n Wi-Fi 2.4GHz
Frequency: 2.412~2.472GHz Max.
Transmission Power: 18.88 dBm
Bluetooth: Supported
Requirement to use
- Wood home app
- WLAN-enabled router: 2.4GHz (Separate Band)
Use
-
Download and install the app “WOOX Home” from Apple App Store or Google Play Store on your mobile device.
-
Open Bluetooth on a smartphone
-
Enable Bluetooth and location permission for the WOOX Home app, so that the app can find Smart Plug via Bluetooth.
-
Launch the app “WOOX Home”.
-
Create a new account or log in to your existing account.
-
Tap “+” to add the device
-
Select the applicable product type from the list of products.
-
Ensure the indicator light is quickly flashing (flashing 2 times per second). If the indicator light isn’t flashing: press and hold the pair button for 5 seconds until the indicator light starts to quickly flash.
-
Confirm the Wi-Fi network and password.
Note: only 2.4GHz WiFi is supported. -
The app will now search for the device and register is to your account.
-
Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.
Safety
- To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture.
- Do not touch the device with wet hands.
Cleaning and maintenance Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit
www.wooxhome.com