FD FUN DESK Premio Pittore Blue Ergonomic Desk Chair Instructions
- June 8, 2024
- FD FUN DESK
Table of Contents
FD FUN DESK Premio Pittore Blue Ergonomic Desk Chair
PARTS
ATTENTIONE
- Please, do not stand on the chair.
- The chair can only be stable after assembly. Do not raise or lower the chair too often.
- Once a month, check that all screws are tight.
- Do not place the chair on a hard uneven surface to avoid damage of the wheels.
- After assembling the chair, place the box in a place inaccessible to children so that they do not accidentally swallow small parts.
- Please, adhere to all of the above-mentioned rules to avoid unwanted harm.
- Maximum load-80kg
Be careful! Do not pinch your fingers! An adult must do assembly!
Insert 4 wheels into the chair base.
Insert the iron tube into the chair base and lock it with screws.
Loosen the knob of the seat cushion, then insert the tube, finally tighten the
knob.
- Back height adjustable.
- Seat height adjustable.
- Seat deepth adjustable.
BEFORE USING THE CHAIR, MAKE SURE THAT ALL ELEMENTS ARE INSTALLED, cORRECTLY
ADJUSTED, AND THAT ALL SCREWS ARE FIRMLY TIGHTENED.
Please ventilate the room to avoid excessive dryness and humidity. If the
chair overturns, immediately wipe it with a dry, clean cloth, then wipe it
with a damp cloth and dry at room temperature. Do not blow dry. If there is a
stain on the metal pipe, use a dry, clean cloth and wipe to a shine. In case
of persistent stains, you can spray a small amount of detergent on the surface
and then wipe with a flannel cloth to a shine.
Warranty
period of service -1 year